Want a premium, US-made hitch that can be removed to leave your bed totally free? Check. Need a slider to get you through those tight turns? Check. How about the option of towing a gooseneck trailer when you're done with the camper? You got it.
Features:
Specs:
Note: This fifth-wheel trailer hitch is not compatible with Sidewinder or Revolution king pins. Do not use any device that changes the pivot point of your trailer's king pin with this hitch.
With the Companion from B&W, you get a heavy-duty fifth-wheel trailer hitch that mounts in your truck bed by connecting directly to the included Turnoverball gooseneck hitch. No modifications are required to your truck or trailer. And no additional parts are required for the system to work. When you're done towing, the Companion can be removed for complete bed access.
The included Turnoverball serves as a sturdy, custom base for installing the Companion in the bed of your truck, but it's also one of the most recognizable gooseneck hitches on the market.
Gooseneck Specs:
With the B&W Turnoverball underbed gooseneck trailer hitch you get the best of both worlds. When you go to tow a gooseneck trailer, the Turnoverball creates a sturdy, dependable connection with your trailer. And when you're done towing, you can stow the ball upside down in the hitch to get full bed access and a clean appearance. When you're ready to tow your fifth wheel trailer, just install the Companion in the ball hole in place of the gooseneck ball and lock the post in place using the built-in handle. You can remove the fifth wheel when you're done towing, leaving your truck bed open once again.
This kit is custom designed for your vehicle. The mounting brackets bolt to existing holes in your truck's frame. While some modification is required - you will need to cut a 4" diameter hole in your bed for the hitch ball and drill holes for the built-in safety chain loops - there is no need to weld onto or to drill into your frame.
Once you have the brackets and center section installed, set up the operating handle. This handle is designed to be accessed from the rear driver's-side wheel well. On the end of the handle is the heavy-duty steel pin that secures the mounting post of the Companion (or the base of the gooseneck hitch ball).
The 1" thick jaw on the Companion is precision machined to provide a tight, sturdy connection. And unlike slide-bar models, the rounded 2-piece jaw on this fifth-wheel trailer hitch inhibits rattle and movement by securely wrapping around your trailer's king pin, resulting in easier hookup and a safer, quieter ride.
In addition to the sturdy jaw, the Companion has durable polyurethane bushings built in to provide a smoother, more comfortable towing experience. These bushings sit on top of the pivot arms that support the fifth-wheel head. Because the head is resting on a padded area, it is able to pivot without clanking. The ability of the head to pivot - both front to back and side to side - along with the trailer also helps to limit the chucking that may occur with a more static hitch.
The dual jaw on the Companion is operated by a simple-to-use cam-action handle. This handle allows you to quickly and easily release the jaws on the hitch, even if you are on uneven terrain. If any binding does occur between your truck and trailer, the jaws may remain closed after you move the handle to the open position. But because the handle is unlatched, there is nothing keeping the jaws closed except for the binding pressure. Therefore, simply driving your truck forward will be enough to force the jaws to open.
The cam-action handle is held in the closed position with the included pin and clip. For extra security, you can replace the pin with a sturdy padlock. The shackle on the lock you choose should have a diameter of 5/16", height of 3", and a width of 2-1/4".
Most often used on trucks with 6' beds, a slider helps to eliminate clearance problems during slow-speed turns. When you are towing a fifth-wheel trailer, your hitch must be situated on the cab side of your truck's rear axle. However, at slow speeds you can use a slider to slide the fifth-wheel hitch (and the trailer) toward your truck's tailgate and past the rear axle, creating enough space between the cab of your truck and the trailer to permit less-restricted turning.
The slider that is built into the base of the Companion allows for 12" of fore and aft travel to give you the clearance you need.
The Companion's pivot arms are what allow the hitch to be adjusted front to back as well as up and down for optimal positioning. As a result, this hitch can accommodate the height of your trailer and also help to give you some additional cab clearance. To adjust either the height of the hitch or the fore/aft positioning, just attach the hitch's pivot arms in the desired location on the base.
The hitch head installs on top of the pivot arms. When you have the head in position, simply secure it to the arms with the included pins.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Average Customer Rating: 4.8 out of 5 stars (4092 Customer Reviews)
Want a premium, US-made hitch that can be removed to leave your bed totally free? Check. Need a slider to get you through those tight turns? Check. How about the option of towing a gooseneck trailer when you're done with the camper? You got it.There is a slapping noise or a bumping coming from the fifth wheel can't seem to find it and I don't know if something is wearing out been finding metal shaving in the bed not big one's but enough to concern me though maybe you might have some insight about this?
This starting happening about 6 months of Use.
Great hitch.All around experience was good. Would recommend getting it. It gives two options gooseneck or put the hitch in to haul a fifth wheel. Not hard to install but do recommend two people to move and install as the hitch is heavy and should be it’s rated for 20,000 lbs.
This is an excellent solution for pulling a 36’ camper with an F250. Slider provides stability while towing and maneuverability while parking. If I were to purchase another hitch for this application, I would buy this hitch from Etrailer.
Outstanding product! Purchased for a 2020 Dodge Ram 2500 w/6.4L Hemi. It took my wife & I about 8 hours to install & everything went together nicely. ~2 hour delay because I wasn’t paying attention & installed the base backwards & had to build a gantry to lift it out. I definitely recommend greasing the round hitch receiver in the bed floor & the square hitch in the base before installing to make removal easier. I recommend the product & looking forward to years of goose neck & 5th wheel hitch use.
Extremely easy install. You will need a torque wrench that’ll go up to 110 ft/lbs. glad I did my research and went with the B&w gooseneck hitch in anticipation of getting this 5th wheel companion hitch at a later time.
This hitch is one fine piece of equipment. Instructions were perfectly detailed and if that's not enough there are videos to guide you. Installed in 4 hours with no problems. Haven't gone anywhere yet but did hook up to camper and was impressed. 2017 Ram 2500 Short Bed
Fast shipping and the box was in perfect condition. I appreciate the amazing customer service. They were friendly and had a good attitude when I called with questions. I look forward to shopping with them in the future. The shipping company called ahead of time and scheduled the delivery because it was such a large item they were friendly and was within their timeframe. Thank you etrailer.com I appreciate it.
This hitch works extremely well. The slide is nice if you get into any tight cornering situations. The hitch top and base separate making it a bit easier to mount and unmount.The lock washer used with the mounting bolt that draws up against the gooseneck pin broke on the 2nd use. I had 2 different torque wrenches set to 79 lbs that I tested the bolt with. Unsure why it broke. But overall we love this hitch and we pull a 38f 5ver without issue. Very smooth ride.
Works great. Love the slide feature. Let's me move the clack back so I can fuel up the generator without needing to unhook. Coach just floates behind truck with this hitch. Super simple to hookup and unhook as well.
Really like this unit with the slide option. With the under the bed option it is also nice that I can remove it and have full bed access. The slide is great as maneuvering is improved significantly without worry of hitting your cab. Assembly is simple. It is heavy so be prepared when installing to have some help but can be handled pretty easily.
Too heavy for one person to install unless you did what I had to do (alone without any help). Removed the bolt from the tailgate end of the roller tubes, pulled the tubes out and separated the upper assemble from the lower bed contact assembly. Doing that allowed me to lift each piece into the bed without tracking down a neighbor.
easy to install no drilling just bolt on
Great for short beds, I can back into spaces or get myself out of smaller than expected gas stations with no worry if contacting with the trailer. For sure recommend and also being able to visual see when the hitch is properly closed on the pin is always great.
Install was not that complicated. Use it to pull 41’ 5th wheel. Slider sure comes in handy
We have towed a 5th wheel camping trailer over 5,000 miles so far with the BW hitch with no problems. We find it easy to hitch up and go. Very happy with this 5th wheel hitch.
Great piece of equipment. Well made and easy assembly.
Excellent experience all the way around! From customer service to sales all the way to will call. Product was easy to install and works excellent.
Was as described very heavy, I would have given 5 stars but after installing I tried to take up. Not gonna happen unless I have some kind of hoist.
Just started 5th wheel camping and wanted a hitch that when removed left my truck box bare. I also talked to alot of people who talked about clunking and noise from their hitch while towing. I bought a 2013 32' Coachman which is pushing my 2009 F150 to its max. When pulling with this hitch it feels like the truck and trailer are one unit. No noise and no slop between the two units. I made a lifting pin that goes into the jaws and lifts it out with a comealong hooked to a rafter support in my garage. I then put it onto a wheel cart I made. No heavy lifting and one person can do it all. I've had one teflon foot fall of the hitch and the service was amazing no questions, no pictures, and no waiting. New piece was sent right away. Anyone who tows now and has looked at the hit are very impressed. I would definitly recomend this hitch to everyone.
Awesome hitch!! Awesome service and communication from etrailer . Very helpful videos of installing your products. I highly recommend buying from etrailer. In stock with timely shipping. I received my hitch in two days.
I've had this for about a year. Only have about 2,000 miles of use with a 13,000 lbs 5th wheel travel trailer.
It is still like new. Jaws are tight, no rattles with or without the trailer attached.
I use a nylon guide plate, to keep things clean.
The only issue is the slider will not unlatch from the locked position with the trailer attached.
Unlatch and slides fine when not loaded.
Just haven't made the time to talk to B&W about this.
The base is a heavy bugger, and fits snug in the receptical. I've lifted it in and out myself, but not a smart idea.
Overall I would buy again. For our use, where we need the whole bed the majority of time it is an easy solution.
Great customer service! The phone only rang twice when I called in regarding my order before a human being picked up who was knowledgeable and kind. It was like I was back in time before automated robots became mainstream and American jobs were outsourced. Earned my business, will come back for more.
The hitch works great and the slider has got me in and out of a couple of tight places that I have found myself in. The hitch is heavy and takes up a lot of real estate in my bed but I don’t think that’s a bad thing when pulling a 15k 40ft 5th wheel. Easy to operate and locks up tight and secure. Great product as expected.
Highly recommend watching etrailer video prior to installing. I dry fitted most items prior to permanently placing and bolting. The bracket wasn't easy but you could defiantly get it done yourself. Everything was built with good quality and beefy where you need it. The latch good be done a little smoother but operates like most fifth wheel releases.
We bought a 30-foot 5th wheel that came with an Andersen Ultimate hitch. Tow vehicle is an F250 short bed. After setting up the rig with the Andersen, I wasn't satisfied with the clearances, both cab and bed. Since the turn-over ball was already installed, this hitch was perfect for going to the traditional 5th wheel hitch and it solved all of my clearance concerns.
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.