MORryde Cushioned 5th Wheel Pin Box for 18K to 23K Trailers w/ Lippert 1621SHD

I have not installed this part on my 2021 momentum 395MSR yet, but it was received in perfect condition. I had the same pin box on my Solitude390RKR and loved the way it handled. If the part does not perform as expected once installed and after I have some miles behind it i'll update my review.1451971

Click to Enlarge

Jrm

10/21/2023

Makes a huge difference in ride and works perfectly.

Mike L.

11/9/2023

@Jrm Awesome, glad to hear that!

by: Wayne 03/08/2024

Installed this MORryde cushioned pin box on a 20K# toyhauler(from a solid pin). Comparing 9K miles before and 11K miles after, it made a remarkable improvement in the ride, especially on choppy, rough roads (think I-40 across New Mexico). Easy bolt-on installation. I consulted with the staff @ etrailer.com to ensure the correct hitch model was selected. Shipping was straight forward via truck freight. Excellent communication through the process.1744482

It seems to be ok, installed it yesterday, went ok, it took a while to get here.1575707

Dennis

5/20/2024

Just great, used for about 18,000 miles and better ride for wifes neck problems.

Chris R.

5/23/2024

@Dennis Great to hear!

by: Rick04/21/2024

Pin box came with the wrong rubber insert because the salesman never did his job so l had to buy another insert1770909

by: Greg12/03/2022

Great ride when pulling my camper takes out almost all the chucking. Highly recommended.1477959

Greg

12/4/2023

Its working great there is very little chucking felt compared to the factory hitch.

Replaced the stock Rotoflex pin box on my 2020 GD Momentum toyhauler. What a difference! No more chucking and the ride is so smooth it's easy to forget I'm pulling 20K lbs. Easy to install with a little help.1591169

Replaced my RotoFlex with this unit because I had some bothersome jerking when stopping, and really bad at times when starting. I had this problem since bought trailer in 2017. I only recently discovered it was a combination of my Curt Q25 and the rotoflex. It was dealer installed and they never read the fine print on the Curt Q25 that states not compatible with rotoflex. I only recently discovered this when I was looking in the Curt manual to see if there was something I should check for the issue and came across the Note. It should be a big warning. I checked and found that the MORryde was a direct fit and had very good reviews. I do recommend using new bolts, nuts and cinch washers. Well, I changed today and drove 25 miles in town and on expressway, BIG difference. I would recommend to anyone looking to upgrade to a quality unit.1522176

by: Robert 04/11/2023

Excellent 5th Wheel Pin. We can't even feel the RV behind us.1554568

Delivery was right on the day promised. We got the old one off and this new pin box went right on with no issues. We had a wonderful experience from ordering to receiving. I highly recommend to order from these folks.1531689

by: George 07/15/2022

great product. it's made a difference in the ride & towing of our 43' toy hauler. highly recommended...1329233

Used it today for the first time great ride.1120278

Joseph

8/12/2022

Best move I ever made

Camper rides worse than before. Would like to have old pin box bask.1401512

quick delivery and great product 1133017

From start to finish the service was ABSOLUTELY wonderful!1341946

999662

999736

1498643

Installation instructions were very good! It fits perfectly.
Beware when ordering a part this heavy, the shipper only delivers to the curb.1650809

Click to Enlarge

Entirely better experience towing, my wife and I picked up our 1st 5th wheel toyhauler camper and towing it home it started jerking back n fourth, not knowing what the hell was going on she wanted to return it. I did some research and found this Moryde cushioned pin box and it’s super smooth. We’re both very happy and feel a lot more comfortable towing places.3164102

Click to Enlarge

This kingpin box was promptly delivered after ordering. We installed the new Moryde today and it went on very easily. Although it is very heaving, I used my tractor with a front end loader to remove the old pin box and install the new which really made it very easy. I hooked up to my truck to test the level and everything was perfect. Very satisfied! Thank you etrailer.3160762

Click to Enlarge

Ordered the Morryde pin box to replace the Rhino pin box on a 2022 Riverstone Reserve. Shipping from Etrailer was right away but had a little delay with the shipment because the semi truck could not get up my road. Taking off the Rhino pin had a little trouble as one of the bolts was cross threaded, which I have read from others also having the same issue. The Morryde came with all the hardware and with two people had it changed out in about an hour. Took it for a small drive and really seems to make a big difference, will get it out for a longer drive soon on my next trip. The new pin box went in the same position as the old one and did not change my level or bed clearance.1608353

So far this is a welcome upgrade. Took it on a short trip over some rough road that normally triggers chucking on my F-250. This pinbox prevented it which was a welcome change. I’m looking forward to some longer trips.

Installation was straightforward. Removed the old pinbox which was fairly easy. Installing the new pinbox would’ve been a challenge had my buddy not had a forklift attachment for his tractor. I don’t know the exact difference in weight between the old Lippert pinbox and the new Moryde, but it is substantially heavier. I’d say 2 people muscling and one to install the hardware would still be a challenge. Forklift or similar is the way to go. Also, the new pinbox doesn’t come with new hardware. Got to use your old or make a trip to Lowe’s/Home Depot.

All and all I’m happy with the upgrade, but I thought it was pricey and don’t like the additional weight.1756685

Click to Enlarge

Click to Enlarge

MORryde makes a fantastic Pinbox! I have been a e-trailer customer many times over and always find the customer care from start to finish is great. We recently purchased a 2024 Brinkley Z3100 which came with a Rhino Pinbox.
I hated it! Lots of chucking. Our other 5th wheel a King of the Road has the MORryde on it and pulls like a dream. I had asked the dealer at time we made our new purchase about putting on the MORryde on it and I was told it could not be done.
Don’t ever take just one persons word as gospel and further looking into it, there is definitely a conversion available and thanks to the folks on my Brinkley Owners page and the folks at e-trailer, I ordered it and it is a perfect fit. Definitely takes 2 guys to put it on but I’d say its a 2-3 hour job.
Our install took us about 5 hours as one of the original bolts with the Rhino was cross threaded. Can’t wait to get out and tow with our new MORryde!! They are the best!! Thanks e-trailer for your help!1573549

by: Greg 09/11/2024

It was a nice upgrade over the solid pin box my fifth wheel had. The MORryde pin box did improve the quality of the the ride in my tow vehicle. I would recommend it as a good value for the money.3207351

by: John 08/15/2024

Probably the single best addition to my fifth wheel. We have a grand design solitude 2930. Connecting to the trailer is so much softer and taking off from stops is smoother. The chucking is all be gone. I’d highly recommend this as one of the first upgrades3195390