MORryde Cushioned 5th Wheel Pin Box for 14K to 18K Trailers w/ Lippert 1621 and 1621HD
(172 reviews)
Price: $799.99
In Stock
MORryde
Add to cart
MORryde Cushioned 5th Wheel Pin Box for 14K to 18K Trailers w/ Lippert 1621 and 1621HD
Part Number: MR84VR
In Stock
$799.99
Retail:$985.57
You Save: $185.58
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (172)
- Q & A (0)
- Photos
MORryde 5th Wheel Pin Box - MR84VR
- Lippert 1621
- Lippert 1621HD
- Upgraded Pin Box
- Reduces Chucking
- MORryde
- 21000 lbs GTW
- Fixed Turret
Upgrade the factory pin box on your fifth-wheel trailer to this cushioned model that dampens road shock and reduces back-and-forth chucking for a more relaxed towing experience. Unlike air bags, the internal rubber spring requires no maintenance.
Features:
- Cushioned pin box replaces your factory model for a smoother towing experience
- Provides a more relaxed and comfortable ride when hauling your trailer
- Limits the stress put on your trailer during long road trips
- Rubber shear spring absorbs and dampens road shock and vibration
- Reduces back-and-forth chucking while towing over uneven roads
- Helps eliminate jerking when starting and stopping
- Requires no maintenance, unlike internal air bags
- Internal glide pads allow the skid plate to shift forward and backward and side to side
- Allows for smoother maneuvering
- Also helps to reduce chucking
- Bolt-on installation no drilling required
- King pin sits in same location as factory king pin
- Made in the USA
Specs:
- Application: 5th-wheel trailers with 14,001-lb - 18,000-lb GVWR (maximum loaded weight)
- Designed to replace Lippert 1621 or 1621HD pin boxes
- Pin box weight capacity: 21,000 lbs
- Do not exceed the GVWR that is listed in your trailer's manual
- Spring capacity (for optimal ride): 14,001 lbs - 18,000 lbs
- Fore-and-aft movement of skid plate: up to 3"
- Side-to-side movement of skid plate: up to 1-1/2"
- 3-Year limited warranty (or 70,000 miles)
Rubber Shear Spring Absorbs and Dampens Road Shock
Most standard pin boxes are constructed of steel and are built with the sole purpose of connecting your fifth-wheel trailer to your tow vehicle. There is no cushioning built in, so a factory pin box doesn't do anything to provide a comfortable ride when you're hauling your fifth-wheel trailer.
This MORryde pin box, however, is built with an internal rubber spring that absorbs road shock and vibration at the connection point. So if you're driving on unpaved roads or uneven pavement, this pin box will prevent any road shock and vibration you encounter from transferring from your tow vehicle to your fifth-wheel trailer and vice versa. In other words, the rubber spring takes the brunt of the impact so you and your towing setup don't have to. And because this unit uses a rubber spring instead of an internal air bag like some other upgraded pin boxes, there's no maintenance required.
The internal rubber shear spring in this pin box is optimized for trailers that range from 14,001 to 18,000 lbs to ensure that it provides just the right amount of shock absorption for your application. If this pin box were to be used on a larger trailer, the spring would be too stiff to provide enough cushion. And if your trailer's GVWR was less than 14,000 lbs, then the spring would be too flexible to provide adequate support.
Less Chucking for a Better Ride
Chucking, the back-and-forth jerking movement you feel in your cab when towing, occurs most frequently during starts and stops and while making turns. A typical, factory pin box creates a rigid connection without much give. So when a harsh stop occurs, all of the trailer's forward momentum gets forced through that stiff connection, slamming the king pin in the hitch and jerking your truck around.
To combat this, glide pads are built into the MORryde pin box that allow the skid plate to shift up to 3" forward and backward and 1-1/2" side to side to compensate for some of that violent motion so that you don't have to feel it in your cab.
Bolt-On Installation
This MORryde pin box is a direct replacement for your existing Lippert 1621HD pin box, so the installation is very straightforward. After removing your old Lippert pin box, the MORryde can be mounted into place using the same hardware and bolt holes used by the factory pin box.
Because of the weight of the unit, you'll want a couple of friends to help you lift it into place during installation. Once the hardware is securely bolted down, you'll be ready to go.
RPB72-1621HD-05 More Ride Fifth Wheel Rubber Pin Box Replacement for Lippert 1621 and 1621HD - 14,001 - 18,000 lbs GVWR
Installation Details
Alternate Instructions
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Customer Reviews
MORryde Cushioned 5th Wheel Pin Box for 14K to 18K Trailers w/ Lippert 1621 and 1621HD - MR84VR
Average Customer Rating: 4.7 out of 5 stars (172 Customer Reviews)
Upgrade the factory pin box on your fifth-wheel trailer to this cushioned model that dampens road shock and reduces back-and-forth chucking for a more relaxed towing experience. Unlike air bags, the internal rubber spring requires no maintenance.by: Carl03/25/2024
Product was received as expected. Installation went very well. I am eager to try it out this week on the road!
by: Robert07/29/2023
Love the new pin box. It has performed as advertised and provides a much smoother ride!
by: Robert04/26/2024
Trailer tows so much better with the new pin box.
by: Steve L08/13/2022
This is an excellent pinbox and hopefully I’m saving some wear and tear on my trailer. We have a Superglide auto slide hitch and the Morryde adapter sure beats the capture plate I had before. No more chancing a broken foot when it accidentally falls off.
by: Blain01/06/2024
After talking with a couple of the sales raps, we were able to obtain the right product. It was shipped it was delivered on time. We picked it up at will call installed it a few hours later with no trouble at all. We would recommend etrailers and this product to anyone.
by: Clark 02/27/2024
It took me about an hour to remove the old one and install the Morryde! Out local camper dealer wanted $700 to do that! I guess I'm worth more than I thought!
by: Tom 07/27/2024
Like it smooth ride
by: Ray 07/06/2024
Works great and stopped chucking
by: Robbie 11/28/2023
Towing our 36' toy hauler with this pin box is much less jarring than the original pin box. It definitely isolated the movement of the trailer from the truck.
by: Robert 06/24/2023
This hitch is awesome. It works much better than expected and makes towing our 5th wheel a very pleasant experience.
by: John04/04/2022
Great product is everything l expected can't wait to install it and try it out. Received it in a very short time. Very happy with Etrailer will buy more products with them.
by: Chris 11/29/2023
So far 5 stars. I have not towed with it yet. Install took about 2 hrs and not to bad. Pin box weighs probably double the LCI. Very sturdy and is expected really help the towing experience.
by: Mike 07/17/2023
going to pull with it thursday, just got it today, it is built very well, can't wait to try it out and it is heavy so get some help. Will try to let you know a little latter about how it is. A freind helped me put it on and one more person or a fork lift would have helped.
by: David 10/18/2023
We are completely satisfied with our purchase and the overall help and customer service we received in the ordering process. No more chugging and a much smoother pull behind, glad we made the change.
by: Tim 02/01/2023
I purchased this about 1 year ago, love it, eTrailer also matched online price and delivered in perfect condition! The pin box is AMERICAN made, what else is there to say!
by: Lindsey04/04/2022
Well worth the wait. Smooth ride. Best money I have spent on my RV! Thanks.
by: Michael10/17/2022
wow what a difference this pinbox made 99% of the chucking is gone, the ride is so much smoother and enjoyable. I highly recommend this pinbox for anyone pulling a 5th wheel. Etrailer had it in stock and shipped promptly. I do reccomend 2 people as it is heavy.
Very simple install.
by: Ronald 11/25/2022
Great product really helped to give a smoother ride thanks ron
by: Curtis 08/04/2023
We have ordered from you before and have never had a problem You are excellent and your customer service skills are beyond excellent. Thank you!
by: Rory 01/11/2023
Between deliverie time and sales person to install everything could have not been easier thanks
by: Michael 04/16/2023
This arrived in great shape on a pallet. Haven't installed it yet, but we are excited to give it a try.
by: John 04/16/2023
Part was deliver within a few days of delivery. Super easy install.
by: Bob 02/08/2023
Unit arrived and was in excellent shape. Haven't towed with it yet but am excited to feel the difference.
by: Lawrence 03/28/2023
arrived in good shape
25
172
Show More Reviews
See what our Experts say about this MORryde 5th Wheel Pin Box
- Replacement Shear Spring Options for a MORryde Trailer Suspension SystemWe do a couple replacement shear springs available for you that may work depending on what you're needing. For instance, we do carry the Replacement #75 Rubber Shear Spring for MORryde Trailer and RV Suspension Systems # MR96UR, which will work with the MORryde LRE4000 Series trailer suspension systems with axle ratings between 8,500 and 10,500 lbs. We also carry the Replacement #20 Rubber Shear Spring for MORryde Trailer and RV Suspension Systems # MR79UR. This spring will work with...
view full answer... - Correct MORryde Pin Box for Grand Design Reflection 337RLSThe Grand Design Reflection 337RLS has a GVWR of 13,995 lbs. This is right in the middle of the MORryde Cushioned 5th Wheel Pin Box part # MR74VR for 11,501 lbs to 14,000 lbs or part # MR84VR for 14,001 lbs. If you wanted to do things completely by the book then go with the lesser rated model up to 14,000 lbs. This will work fine for you and is rated appropriately. That said, from our experience, customers tend to overload their trailer and it's worthwhile to have some extra margin of error...
view full answer... - Recommended MORryde Replacement Pin Box For A Lippert 1621HD Pin Box Since you have a 1621 bolt pattern and 15,500lb GVWR the MORryde Cushioned 5th Wheel Pin Box for 14K to 18K Trailers w/ Lippert 1621HD # MR84VR that you were looking at would be the correct replacement. To connect the MORryde pin box to your Demco Autoslide you'll just need to swap out the capture plate of the pin box with the Demco Autoslide Locking Plate for MOR/ryde Pin Boxes # DM6025.
view full answer...
- Will A Rota-Flex Pin Box Provide A Better Ride Quality With A Curt CrossWing 5th Wheel Hitch If you have the Gooseneck versions of the Curt CrossWing ( # C92DR or # C32DR) you unfortunately would not be able to use the Rota-Flex with it. The pivoting head causing too much strain for the single point of contact you have with a gooseneck hitch. If you have the base rail version # C86JR with four points of contact then you would be able to use a Rota-Flex pin box. As for the ride quality, the pivoting head of the Rota-Flex can help reduce chucking so it would be worth considering...
view full answer... - Can MORryde Pin Box be Used with Demco Hijacker Autoslide Fifth Wheel HitchYes, MORryde cushioned pin boxes like # MR84VR can be used with Demco Hijacker Autoslide fifth wheel hitches. There's even a capture plate from MORryde that was designed for this application with the part # DM6025.
view full answer... - Is MORryde or Rota-Flex a Better 1621 Pin Box Replacement?Hey Donald, thanks for reaching out! I recommend using the MORryde Cushioned Pin Box # MR84VR over the Curt Rota-Flex # LC328330 any day because it has better cushioning technology. Back in the day when the Rota-Flex was first released it was top-notch, and while it's still an effective pin box, the MORryde system performs better. The MORryde number I referenced above is for 14K - 18K trailers. If you have a different GVWR then you'll either need part # MR74VR for 11.5K - 14K trailers...
view full answer... - Rota-Flex Pin Box Upgrade for a 2022 Salem Hemisphere 369BLThanks for the photo, David! The pin box on your 2022 Salem Hemisphere 369BL is a 1621 model with a 15.5K weight rating. To replace this with a Rota-Flex you need the part # LC328330. This is rated for 18K, but the extra bit of capacity won't be an issue. The Rota-Fle is more of a mid-tier pin box so if you wanted something with a better performance, then I recommend the MORryde Cushioned 5th Wheel Pin Box # MR84VR which has a better cushioning system. Attached are some pin box videos...
view full answer... - Can A MORryde Cushioned Pin Box Be Used With A PullRite SuperGlide 5th Wheel Hitch If you're asking if the MORryde Cushioned 5th Wheel Pin Box # MR84VR would be compatible with a PullRite SuperGlide 5th wheel hitch you'll just need the correct adapter # MR57ZR. This adapter replaces the plate currently on the pin box with one that has a built in wedge so that you can lock the king pin into the jaws of the hitch. If you're wanting to replace your current pin box with the # MR84VR then you'll first want to determine the bolt pattern and GVWR. You can find the GVWR on...
view full answer... - Weight Of The MORryde Cushioned 5th Wheel Pin Box # MR84VRThe MORryde Cushioned 5th Wheel Pin Box for 14K to 18K Trailers w/ Lippert 1621 and 1621HD # MR84VR is listed as being 190lbs. You'll probably want to have three people to lift the pin box in place and get it bolted, unless you have access to a forklift like I did in the attached installation video below.
view full answer... - Will The Curt Flex Air 5th Wheel Pin Box, # LC328492 Work For 2022 Landmark NewportCheck the tags on the RV itself to verify but from an online search it appears that your RV has a GVWR of 18,000 lbs. which means the Curt Flex Air 5th Wheel Pin Box, # LC328492 will work. The Curt Flex Air 5th Wheel Pin Box, # LC328492 replaces Lippert 1621 pin boxes and is rated for use up to 18,000 lbs. the MORryde Cushioned 5th Wheel Pin Box, # MR84VR is listed to replace a Lippert 1621HD pin box and also rated for use up to 18,000 lbs. The difference between the 1621 and a 1621HD...
view full answer... - Options For Lower The Nose Of Your Fifth Wheel Trailer To Ride Level The MORryde Cushioned 5th Wheel Pin Box # MR84VR you were looking at has a total height of 11.35" (pictured below) so you wouldn't see much of a difference from the standard pin box you currently have. Based on what you've stated and the pictures you've provided you're not going to be able to adjust the pin box or the hitch enough to lower the nose of your trailer so the only option would be to raise the height of the trailer. This can be done by replacing the leaf spring hangers with...
view full answer...
- Correct MORryde Cushioned 5th Wheel Pin Box for 2021 Grand Design Reflection 367BHSThe correct MORryde Cushioned 5th Wheel Pin Box for a 2021 Grand Design Reflection 367BHS is part # MR84VR. The Lippert 1621 and 1621HD are interchangeable.
view full answer... - How To Determine If A MORryde Cushioned Pin Box Will Fit Your 5th Wheel Trailer To determine if the MORryde Cushioned 5th Wheel Pin Box for 14K to 18K Trailers w/ Lippert 1621 and 1621HD # MR84VR will fit your trailer you'll need to first determine your trailer's bolt pattern. There will typically be a sticker (pictured below) that lists a serial number, RPO number, and LCI item number that we can use to look up your bolt pattern. If you sticker is missing or has been painted over then you'll need to measure the bolt pattern using the attached guide below. The MORryde...
view full answer...
- MORryde Cushioned 5th Wheel Pin Box For Lippert 1621HD Pin Box on 15k 5th Wheel TrailerThank you for that information with the photo, and I reached out to Lippert to find the pin box you have, and they told me that you had a Lippert 1621HD pin box. We do have the MORryde cushioned pin box that will work as a replacement with the following part: - MORryde Cushioned 5th Wheel Pin Box for 14K to 18K Trailers w/ Lippert 1621HD # MR84VR This pin box is a really nice upgrade for your Brookstone trailer, as the MORryde has an internal rubber sprig which absorbs vibration and shock...
view full answer...
- Will the MORryde Cushioned Pin Box For Lippert 1621HD Pin Box Also Fit a Lippert 1621 Pin BoxYes. The MORryde Cushioned 5th Wheel Pin Box for 14K to 18K Trailers w/ Lippert 1621HD # MR84VR can be used to replace a Lippert 1621 or 1621HD; this pin box replacement is designed for trailers with GVWR up to 18,000-lbs so it is rated properly for your 15,000 GVWR trailer.
view full answer... - Is The MORryde Cushioned 5th Wheel Pin Box Compatible With Curt CrossWing 5TH Wheel Hitch? Yes, you can use the MORryde Cushioned 5th Wheel Pin Box # MR84VR with the Curt CrossWing Lightweight 5th Wheel Trailer Hitch # C86JR.
view full answer... - How Much Does The MORryde Cushioned 5th Wheel Pin Box MR84VR Weigh?The MORryde Cushioned 5th Wheel Pin Box # MR84VR weighs right at 190 pounds. Due to this, it will ship freight. Just in case you needed, this is designed to fit 14,000 to 18,000 pound trailers with the Lippert 1621 and 1621HD pin boxes.
view full answer... - Which MORryde Cushioned Pin Box Fits Rockwood Signature Ultra Lite Fifth WheelWe know that your Rockwood Signature Ultra Lite uses a Lippert 1621 pin box so the correct MORryde pin box would be the # MR84VR that you referenced.
view full answer... - Will the MORryde Cushioned 5th Wheel Pin Box Replace a Lippert 1621 Pin BoxHey Anthony, it sounds like your trailer's already got the Lippert 1621 pin box which means the MORryde Cushioned 5th Wheel Pin Box for 14K to 18K Trailers w/ Lippert 1621 and 1621HD # MR84VR will work great as a replacement. As far as toque specs go, I've gone ahead and attached the table referring to which bolts require what for you to check out.
view full answer... - Trailair Rotaflex Pin Box ReplacementI reached out to my contact at Lippert and this pin box is not serviceable. Is there a chance you are using an autosliding hitch or something that might exert some leverage on that cushion area? The replacement pin box would be the Lippert # LC328330 (1621 Bolt Pattern - Rated 18K) Trailair pin box with rubber compound to absorb shocks. Another option is the Lippert # LC179879 Trailair Flex Air rated 18,000 pounds and 1621 bolt pattern with an internal airbag and a shock absorber to...
view full answer... - Is the MORryde Cushioned 5th Wheel Pin Box # MR84VR The Same Length as a Lippert 1621? The MORryde Cushioned 5th Wheel Pin Box # MR84VR is going to be the same length of 17-3/4" from the center of the king pin to the center of the front mounting bolts. Do understand this measurement is the horizontal distance only and does not account for any vertical difference if you are measuring at an angle. One thing to remember is the cushion does allow for additional movement of the king pin up to 3" total front to rear and 1-1/2" side to side. These movements are only fully experienced...
view full answer... - Difference Between MORryde Pin Boxes RPB72-1621SHD-TA-05 and RPB72-1621HD-05They really are very similar and interchangeable but the # MR84VR is for replacing a Lippert 1621 pin box whereas the part # MR94VR is for replacing a Trailair setup that also was for the 1621SHD.
view full answer... - Replacement Pin Box Options For a 2022 Keystone Cougar 316RLS 5TH Wheel CamperYour 2022 Keystone Cougar 316RLS does have a Lippert 1621 Pin Box # LC1191191. You are able to upgrade this to one of the following pin boxes. MORryde Cushioned 5th Wheel Pin Box # MR84VR Trailair Rota-Flex 5th Wheel Pin Box # LC328330 Curt Flex Air 5th Wheel Pin Box # LC328492 If you are looking to use with a gooseneck hitch we have the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box # GY58GR. Do remember you will need the Safety Chains # GY49GR if you are going to the ball connection.
view full answer... - Replacing a SPB72-1621LD Pin Box with a Rota-Flex or a MORryde Pin Box with Chucking in MindIf you're comparing the Tailair Rota-Flex that replaces a 1621 or 1621HD Lippert pin box, part # LC328330, with the MORryde equivalent (part # MR64VR for 5th-wheel trailers with up to 11,500-lb GVWR, and part # MR84VR for 5th-wheel trailers with 14,001 to 18,000-lb GVWR), then I recommend going with the Trailair. The Rota-Flex is built with chucking and road shock in mind, so it utilizes a pivoting head with a built-in rubber compound. The pivoting head allows for controlled movement of...
view full answer...
Do you have a question about this 5th Wheel Pin Box?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Kathleen M
Updated by:
Leah S
Updated by:
Wilson B
Video by:
Jonathan Y
Video by:
David F
Written by:
Mike S
Test Fit:
Clayton O
Test Fit:
Kevin C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John
4/8/2023
Im glad I got it .makes a huge difference when hauling alot smoother ride.