Reese Towpower 3-Way ATV Hitch w/ Ball Mount Adapter - 2,000 lbs

See what our Experts say about this Reese ATV Hitch

• Bike Rack Solution for Hitch Ball Mounted on Truck Bumper
  The ATV Hitch part # RP7065100 was designed to fit a hole with a 5/8 inch diameter and wasn't really designed for your application so I wouldn't recommend attempting to use it as a first choice. An easier solution might be a bike rack that attaches directly to the hitch ball like the Curt Clamp On part # C18013.
  view full answer...
• Will the Reese Towpower 3-Way ATV Hitch Adapter Fit a 2013 Honda Rancher TRX
  The Reese Towpower 3-Way ATV Hitch w/ Ball Mount Adapter part # RP7065100 should fit a 2013 Honda Rancher TRX so long as it has a 5/8" diameter hitch ball hole. The Reese Towpower 3-Way ATV Hitch will work to extend the connection point for towing so you don't hit your tires. The hitch mount adapter comes with a serrated washer and lock nut to hold it in place and stop it from pivoting with the trailer but there won't be much side to side force on the adapter to cause this anyhow. I am...
  view full answer...
  
• Winch Mount for ATV When Custom Mount Is Not Available
  We have custom fit winch mounts from Bulldog and Superwinch for ATVs but neither manufacturer has a confirmed fit for your 2004 Suzuki King Quad LTF300 FK4. I recommend the Reese Towpower 3-Way ATV Hitch w/ Ball Mount Adapter - 2,000 lbs # RP7065100 and then you can use the Curt Trailer Hitch Electric Winch Mount Plate # C31010 or something similar in that receiver. There won't be a line pull rating that is accurate for a configuration like this, so you will need to use your best judgment...
  view full answer...
• Recommended 2 Inch Receiver for Zero Turn Lawnmower Fertilizer Spreader
  We don't have anything like the # 13333 that has mounting holes 10 inches apart. For your application you will need to either customize a fit for that part or use a different style like the Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers # UF35-946401 which could be bolted to a strong frame crossbeam for your unique need. Another option is to use the Reese Towpower 3-Way ATV Hitch w/ Ball Mount Adapter - 2,000 lbs # RP7065100 for this custom application.
  view full answer...
• Recommended Trailer Hitch Adapter For 2001 Dodge Durango To Tow ATV Trailer
  We have just what you are looking for. If you have a 2 inch receiver on your 2001 Durango I recommend the Reese Towpower 3-Way ATV Hitch, part # RP7065100. This adapter attaches to your 2 inch receiver and gives you a 5/8 inch hole for the clevis pin on the ATV trailer you just purchased. This adapter does have a 200 lb tongue weight capacity and a 2,000 lb towing weight capacity, and a 2-1/2 inch rise. For a higher capacity ball mount check out part # 80410. This ball mount has a weight...
  view full answer...
• How To Install a Pintle Hook On an ATV
  I do have an option for you but I am not aware of any pintle hooks available for a 1-1/4" trailer hitch receiver. Therefore, you u will need to replace the 1-1/4" trailer hitch receiver with a 2" trailer hitch receiver. In order to do this we have a few options, the Reese Towpower 3-Way ATV Hitch part # RP7065100 or the Curt ATV Ball Mount Adapter part # C45006 should work. These will then allow you to install a pintle hook like the Buyers Pintle Hook part # 337RM5P.
  view full answer...
• Can Standard 2 Inch Ball Mount Be Used with Reese Towpower 3-Way ATV Hitch # RP7065100
  Yes, the Reese Towpower 3-Way ATV Hitch with Ball Mount Adapter, # RP7065100, can be used on your Polaris Sportsman ATV with a standard ball mount like the Ball Mount, # AMSC2. For Ball Mount, # AMSC2, you will need a hitch ball with a 1-inch shank diameter, # 19260 for 1-7/8 inch or # 63845 for 2 inch.
  view full answer...
• How to Fix Reese Towpower 3-Way ATV Hitch Turning During Use
  If you're staying within the 2,000 lb capacity of the Reese Towpower 3-Way ATV Hitch w/ Ball Mount Adapter # RP7065100 and the bolt is coming loose then I recommend using some threadlocker like part # LT37643 to help keep everything in place. The blue threadlocker isn't as strong as the red threadlocker so you'll be able to remove this system from you ATV if you ever need to.
  view full answer...
• Can a Trailer Hitch be Installed on a Golf Cart to Pull a Single Axle Trailer
  An RV frame trailer hitch such as # 13703 is going to be too large to install on a golf cart but I have some options that could work for you. First, take a look at the Reese Towpower 3-Way ATV Hitch # RP7065100. If your golf cart has a 5/8 inch tongue or frame hole at the back center you could bolt on this 2,000 pound capacity hitch (limited to the capacity of the golf cart). Another possible option is a hitch such as # C19031. There would need to be a flat metal frame piece of the golf...
  view full answer...
• What Size Ball Will Fit ATV Hitch RP7065100 and How Does the Hitch Install
  There is a 3/4 inch ball hole in ATV hitch # RP7065100. The shank of the 2 inch ball will need to be 3/4 inches to fit. If you need a 2 inch ball with a 3/4 inch diameter shank you can use # 19258. The hitch itself mounts to a 5/8 inch diameter tongue hole. If that is what the tractor has now then this set up will work.
  view full answer...
• Recommended Winch Mounting Solution for 2002 Suzuki 300 King Quad
  I have a solution for you, but neither Bulldog or SuperWinch has a confirmed fit for your 2002 Suzuki 300 King Quad. Instead, you can use the Reese Towpower 3-Way ATV Hitch w/ Ball Mount Adapter - 2,000 lbs # RP7065100 and then you can use the Curt Trailer Hitch Electric Winch Mount Plate # C31010 (or any other hitch mounted winch plate) in the receiver you've installed. Going this direction, there won't be a line pull rating that is accurate so you will need to use your best judgment...
  view full answer...
• Trailer Clearance For Tight Turns of Heavy Off-road Machine
  There is not an extension that goes over a current ball mount where the ball is to extend the mount for sharp turning. There will always be an issue with sharp turns causing trailers to jackknife. The options you have to give you more clearance are an extension on the receiver side like # C45791 or a longer ball mount like the Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs # BM20. Either option puts the trailer pivot point farther away from your front...
  view full answer...

Do you have a question about this ATV Hitch?