Arched, aluminum ramps let you load your gear into your truck or trailer. S-curve design helps to prevent low-clearance equipment from bottoming out. Folds at the center for storage. Each ramp supports 750 lbs for a combined capacity of 1,500 lbs.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbors, Steven here with etrailer.com. Folks, today, we're taking a look at the Reese Arched Loading Ramp Set. It's gonna be a center fold, made out of aluminum, 92 by 12 inches wide. So I'm gonna go ahead and start with that folks. So overall measurement, we're limited in space in here today, so I'm gonna go and throw up a graphic, 92 inches long, 12 inches wide. Nice footprint for anything you wanna load, maybe such as a zero-turn mower or something like that.
And if you noticed, the ramps that are hanging off of the trailer side there, they have what's called an S-curve or an S-slope to them. And that kinda helps get it higher off the ground. So whenever you're getting up there, you're not worrying about angles and stuff and those kinda things. So I wanna go ahead and step out of the way, so you can kinda see it all the way here. Let me go ahead and move this other one too.
So again, 92 inches long, very impressive. Obviously, I've got it super, super high, you would never wanna have it that high. I mean, you could, typically, this is a lot higher than even the bed of a truck, I think. I think I'm about at 42 inches tall on my table. If I'm not correct there, then forgive me.
But the length of them, again, 92, that's a decent angle, I would say, if you we inchesre doing a quad maybe. But again, picture them being lower, because more likely than not, they're gonna be lower. And as you can see up here in the front, you've got this strap. The strap is permanently bolted to the ramps from the start. And what you'll do is you have this hook and a cam buckle, and that hook will get loosened and stretched over to say the underside of the bumper of a truck or the angle iron or the frame of the trailer.
And then you're gonna pull that tight with that cam buckle, and you're gonna cinch that tight, and essentially hold it tight in place. So when you're loading, it's not gonna slip out on you or anything like that. So that strap's there for safety. And I'm gonna go ahead and pull one of these up here closer to you, so you can take a better look. So as you can see, aluminum. You've got the punched-out grip holes here. Now, these ramps can be used for ATVs, golf carts, UTVs, lawnmowers, and so much more. Like I said, they are hingeable, so they do fold out here in the center. And again, that strap is bolted in place. So there's the bolt here for those straps. Now, one other thing why I got you close up here, this is the end that would go over like the bed of the truck or the end of the trailer. And you can see it's spring loaded. So that's gonna be nice, because it's gonna conform perfectly to whatever you're laying it on and help get that correct angle. Now, once again, the punched-hole design is gonna be great for traction. It's also gonna allow water and grime to drain. It's gonna be ideal for muddy, wet tires, those kinda things. And like I mentioned, that cam buckle is gonna be used for safety to keep that in place. So there's a better view of the hinge. And these are rated at a total combined rating, sorry about that, 1,500 pounds. And again, that's a total combined rating, 750 pounds per ramp. The ramps only weigh about 21 pounds a piece. So again, aluminum, lightweight, heavy-duty, but they're gonna be easy to store and carry around. Well, folks, I think this has been enough information today with you. I appreciate your time. I hope the limited view I could give you today was enough to help you with your decision. I'm Steven, thanks for watching.
Average Customer Rating: 5.0 out of 5 stars (1 Customer Reviews)
Arched, aluminum ramps let you load your gear into your truck or trailer. S-curve design helps to prevent low-clearance equipment from bottoming out. Folds at the center for storage. Each ramp supports 750 lbs for a combined capacity of 1,500 lbs.Nice looking product, appears very strong and light (haven't used yet).
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.