Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Lift your 5th-wheel hitch from your truck bed with a hoist. Just install this lifting bracket into the jaws of your hitch and attach a cable to the eye.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we'll be having a look at the Demco 5th Wheel Lifting Bracket. Part Number DM6100. Many of our customers here at etrailer have come to us and have expressed that they've had experienced difficulty in the past when it comes time to remove the 5th wheel assembly from the bed of their truck when they want to have full access to it when they're not towing their trailer. Many have also said that it takes two to three people sometimes to remove a 5th wheel assembly, especially when they have a slider, such as this one, because the slider assembly adds a lot of weight. When you want to make it a one man operation, that's where this Demco Lifting Bracket comes into place.As you will notice it looks like a kingpin. That serves a purpose of sliding into the jaws of our 5th wheel giving us a solid attachment point.
To utilize it we'll simply open our jaws of our 5th wheel. With the jaws open we can insert our lifting device. Making sure we watch our fingers. Enclose the jaws around it. With our lifting adapter now in place we now have an eyelet here to attach a cable or chain to a engine hoist, a standard hoist on a ceiling, a crane, a wench, something of that nature.
Any lifting device that you have where you can attach a cable to properly. We can use that to lift this out of the bed of our truck.Now this lifting device is made of a sturdy steel construction and has a lifting capacity of 500 lbs., which is minimally sufficient to handle most every 5th wheel regardless if you had a slider or not. For a few dimensions for you, you're looking at 5-3/4" tall, from the very base of it to the very top of it. Diameter here is 2", just like your standard kingpin. The base is 3" wide.
The eyelet opening has a diameter of 1-1/8". That completes our look at the Demco 5th Wheel Lifting Bracket. Part Number DM6100.
Average Customer Rating: 4.8 out of 5 stars (314 Customer Reviews)
Lift your 5th-wheel hitch from your truck bed with a hoist. Just install this lifting bracket into the jaws of your hitch and attach a cable to the eye.
The lifting eye works great to pull our 380lb hitch out of our pickup.
Works great. Able to lift my hitch out of the truck and then lower to a dolly to move out of the way. Also great for putting the hitch back in the truck.
Ron K.
4/7/2024
Works great. I have a lift in my garage and I use the bracket when removing g and installing my 5th wheel hitch on my truck. I lower it on to a dolley and then roll it out of the way. So easy to use, I remove it after every camping trip.
Makes instalation and Removal a breeze. I use this and a tractor to lift. No more fighting to wrestle the hitch.
Great bracket for lifting my SuperGlide hitch
Dennis
5/1/2023
Still working like it should.
Outstanding product, a must to use to elevate the hitch unit to work on replacing the adapts plates to use with puck unit vice rail adapters.
didn't know if this bracket would fit in a curt a16 5th wheel hitch. Worked fine. Lifting approx 290 lbs. Hitch and adapter.Quite satisfied with dm6100 lift bracket
Kurt V.
5/24/2021
Follow up on demco 6100 lift bracket. Has been a little over a year and bracket working out great. 2017 ram 3500 truck,curt a16 fifth wheel hitch,pullrite bed adapter all inclusive abt 300lbs. I am 66 years old and cant lift what I used to be able to. Sure I can remove in pieces and do it without lift and bracket but is a lot of weight for me.Bracket and lift make it possible to remove in 1 piece with way less wear and tear on me.BIg plus is I can do it by myself.I lift to bed of truck on to 2x4s then remove bracket from hitch from there can push into position and in puck system.bracket works great.
Great tool to help lift my 5th wheel hitch out of my truck.
Howard
12/20/2022
A year later and I cannot say enough positive things about this lifting bracket. Used frequently and no signs of wear. Still highly recommend this product.
Welded extremely strong and also powder coated. It would take forever to make one of the same quality. A little bit on the pricey side but worth it. I can easily lift my fifth wheel hitch in/out of the truck by myself with a winch.
Marvin G.
1/18/2021
Excellent tool for lifting the hitch.
Worked perfectly in my companion 5th wheel hitch.
Todd
8/4/2022
Still working great. Strong and sturdy hoist. Can always count on it.
It does what it’s supposed to do….help you lift the hitch off your truck with a winch or tractor.
Only using this twice a year it’s hard to judge long term but it’s solid,it’s simple and it works fine.Just the ticket to easily remove fifth wheel from truck bed.
Dan S.
11/4/2023
Have used so little it’s hard to judge long term durability.Stand by original review.Solid,simple,works like a charm.Save your back.use this.
The Demco 5th Wheel Lifting Bracket - DM6100 works great with my over head winch for lifting my Demco 5th wheel hitch from the bed of my truck. Just clip into 5th wheel, make sure 5th wheel is latched. Then raise winch and drive out from under hitch. I then lower onto a cart to move. one person job now! No strained mussels any more!
Works great. Lock in, hook up, pick up, Done. My Demco 21K Autoslide hitch is about 300Lbs of pure greatness but tough to manhandle by myself. This makes it easy, along with my chain hoist of course.
Great product, great service from etrailer!
Excellent solution for effortlessly lifting our fifth wheel hitch from the bed of the truck. I installed a hoist on the garage ceiling to do the lifting and rather than struggle with straps around the hitch to hook to the hoist, this bracket easily slides into the hitch and provides a no brainer way to raise it up. What ever method you use to lift your hitch (cherry picker, engine hoist, winch, ceiling hoist, pallet forks on a tractor, etc) this bracket simplifies the process. No chains, straps or ropes. Slide it in place, hook it up, and go.
AND, the item arrived 2 days earlier than originally projected!
I was pleased to find this helpful tool. When lifting my fifth-wheel hitch out of my truck bed I used a rope that I tied around the hitch in order to lift it with my engine-block crane. It wasn't very satisfactory because the hitch lifted out at a bad angle due to the locations I chose in order to run the rope around the hitch, and my knots could have slipped. There had to be a better way. There were no suspension connection points installed on the B&W Companion Hitch, to assist me, so I sought another solution. This fitting does the job perfectly.
I have a Demco Autoslider for my 40' fifth wheel and F-350 6 3/4' box. It is a great hitch, but weighs a lot and installing and removing the hitch is not easy given the weight. I had previously used straps, however getting the hitch centered on my chain hoist took some work. The Demco lifting bracket makes that task much easier.
The bracket works perfectly! I use it to lift the hitch out of my truck bed.
Marc M.
11/25/2021
Still going strong! Makes lifting the Pullrite in and out of my truckbed much easier! Have always had success using strainer and their products!
Great tool for removing the Curt 20k 5th wheel hitch. I bought a hoist from Harbor Freight and installed it in my garage. I also made a coaster for the hitch so that I can wheel it around. Now all I do is insert the 5th Wheel Lifting Bracket into the mouth of the hitch, close it and I'm done. No more strain but a lot of gain.
A little expensive but worth it and they need to add this product to "5th wheel hitch accessories" to make it easier to find
This does the job. I'm thinking about welding a handle under the eye to facilitate easier mounting to the fifth wheel.
Feel free to use these pictures. Highly recommend. Lifesaver for people who are getting too old to handle these hitched by themselves.
Works great, I use with a manual chain hoist in my garage and lift the entire hitch off and on the truck and leave it hanging when not using the hitch.
Glenn
4/24/2023
Still works great. So much easier and safer than my former system of steel cables hooked onto the manual chain hoist.
Works really well getting the hitch out of the bed.
It works just like I expected
Perfect for lifting the fifth wheel hitch in and out of my truck.
Works as expected.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Steve
8/28/2024
The lifting eye has never let me down. I would recommend this to anyone needing to install and remove there hitch often.