To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces 1 stake pocket insert for your Access Adarac truck bed ladder rack.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Adarac Replacement Stake Pocket Insert. This is going to replace one stake pocket insert for your truck bed ladder rack, it's going to ensure that you have a nice solid connection there, it's going to fit into your truck bed stake pocket very snuggly and it will allow you to hold that up as you're getting it connected in place. Now, this is specifically designed for your Access Adarac truck bed ladder rack on your 1993 through 2013 Chevy or GMC 1500 or your 2001 through 2014 Chevy and GMC 2500 and 3500. It might also work for other applications, but those are the ones it was designed for, so if you are gonna use it for another application, might require some modification or something like that. But it is an aluminum construction, so it is gonna be rust proof and hold up well for you.
They do include the bolt that's gonna fit down into that washer to secure your ladder rack onto your truck bed. Just to give you a few measurements here, you can see that bottom most bracket is right about three inches in length and just a little over two inches in width. And our top pieces here, looking at approximately 2 1/2 inches by, call it 1 3/4 of an inch there. That'll be the same for both of those too. So if you are needing to replace a stake pocket insert for your ladder rack, especially the Access Adarac truck bed ladder rack that we showed on the screen there a moment ago, this is gonna be exactly what you need.
That completes our look for today. Again, I'm Michael with etrailer.com, thanks for watching..
Average Customer Rating: 4.4 out of 5 stars (25 Customer Reviews)
Replaces 1 stake pocket insert for your Access Adarac truck bed ladder rack.Product was as expected and worked well
I ordered 4 of these, one for each stake pocket. All 4 packages had the same parts number, but 2/4 threaded spacers were of different size and thickness. I used a chop saw and grinder to resize the threaded spacers to fit my pockets and then fabricated 4 more regular spacers because the 2 in each package wasn’t enough to close the gap between the threaded spacer and the truck rail, causing my truck rail to bend and dent as I tightened the bolt.
Excellent well made product that does the trick of connecting a custom rail to my truck. However, it is designed for Chevy/GMC vehicles. The insert plates are too large for a Ford stake pocket and will need to be trimmed down to work.
Will not fit 2023 Ford F-150. Do not bu y!
Katrina D.
7/13/2023
Can you please provide some more information about what exactly is not fitting? It would be helpful to get some pictures if able.
Good product I would rate 5 stars if shipped with lock washers. I installed and checked tightness after a couple days. About a month later it rattled loose and fell down inside truck body. Now I will use locks, easy solution but pain in the butt and I had to purchase again since original is gone.
Shipping was fast and cost effective. Etrailer has had the parts I need when I cant find then anywhere. 4th time buy from them definitely recommend.
The part was perfect when helping set up any type of ladder rack.
Product works great. I use this as an anchor for a ladder rack that I then use to carry 4 kayaks. It's a solid anchor and I've used it several times now that traveling as far as 4 hrs away. No issues
Purchasing this for a future project and I tried locating it on the internet without success. Was happy that I found it on etrailer. By the way BgTruckBigRv put me onto etrailer.
Worked great, even on a different brand ladder rack.
These parts fit perfect. I bought the rack used from someone with a different truck. The parts and directions for install were great.
Price was decent as well.
They fit. They work. I would buy them again.
Item of speciality nature; excellent solution. Unsolicited communication with seller was unique and appreciated. Great place to do online business.
Great product
Exactly what I was looking for.
Good to be able to find the parts, and they arrive quickly.
great products, attentive service..
Fit my Chevy 2016 2500 HD.
All good
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jonathan D.
11/2/2017
The product continues to work great. The rails have been on the truck all year and Ive used them a number of times to transport kayaks and sailboards. This has worked out very well. Thanks!