Americana Trailer Wheel Lug Nut - Chrome Plated - 1/2"-20
(507 reviews)
Price: $4.68
In Stock
Americana
Add to cart
Americana Trailer Wheel Lug Nut - Chrome Plated - 1/2"-20
Part Number: AM90049
In Stock
$4.68
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (507)
- Q & A (0)
- Videos (1)
- Photos
Americana Accessories and Parts - AM90049
- Boat Trailer Wheels
- Golf Cart Tires and Wheels
- Trailer Tires and Wheels
- Wheel Lug Nut
- Acorn Nut
- Bulge Nut
- Americana
- 60-Degree Cone
- Chrome-Plated Steel
- 3/4 Inch Outer Diameter
- 1/2 Inch Wheel Bolt
Trailer wheel lug nut fits 1/2" diameter wheel bolts and is chrome plated for durability and corrosion resistance.
Features:
- Chrome plated for durability and corrosion resistance
- Fits 1/2" wheel bolts with 20 threads per inch
- Standard 60-degree cone
- Measures 1-3/4" long x 3/4" outer diameter
90049 Americana Chrome-Plated Lug Nut - 1/2"-20
Video of Americana Trailer Wheel Lug Nut - Chrome Plated - 1/2"-20
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Let’s Check Out the Americana Trailer Wheel Lug Nut
Today we're going to review part number AM90049. This is the Americana 1/2 inch by 20 trailer wheel lug nut with the chrome-plated finish. The 1/2 inch by 20 designates the size of bolt that this will fit on; 1/2 inch is the diameter and the thread 20 means 20 threads per inch. Usually on most lug nuts they will be stamped. If you see on this one, it'll say 1/2 inch by 20 to let you know what size this is. This also has the standard 60-degree cone you can see here that will fit the 60-degree taper of the wheel you put it on.
It is a chrome-plated finish for durability and corrosion resistance. To give you a measurement on this; overall length of this lug nut is 1-3/4 inches and the hex head size or socket size you would need to use on this is 3/4 of an inch. I happen to have a deep-well 3/4 inch socket here, you can see it fits perfectly right on there. Just wanted to show you on your trailer wheel, most trailer wheels will just have a standard open-end small lug nut. This longer lug nut with the closed end you could put on there. It gives you a little bit longer reach, also a nicer finish, but the main advantage of using the longer lug nut is lots of times people will change from a steel wheel to an aluminum nice wheel and the aluminum wheels usually will have a deeper middle to where your lug nuts are so instead of having a shorter lug nut like this on it you need a longer lug nut so you can access it with your socket.
These longer lug nuts like this will work a lot better in the aluminum designed wheels. That should do it for the review on part number AM90049. This is the Americana 1/2 inch by 20 trailer wheel lug nut with the chrome-plated finish. .
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Package not accepted
- etrailer mistake
Customer Reviews
Americana Trailer Wheel Lug Nut - Chrome Plated - 1/2"-20 - AM90049
Average Customer Rating: 4.8 out of 5 stars (507 Customer Reviews)
Trailer wheel lug nut fits 1/2" diameter wheel bolts and is chrome plated for durability and corrosion resistance.by: Allen 09/08/2023
Expensive, but cover all the threads.
Perfect for aluminum rims where the lugs are recessed into a machined area.
Have a 3/4" thin wall 6 point deep socket handy.
All 20 fit like a glove, no imperfections, and look like they'll last.
5 star except at $4 a pop I have $80 in lug nuts!!!
by: Rodney06/21/2024
I ordered 22 lug nut and received 21.... the center caps plastic covers are cheep 3 broke .... ears jest fell rite off. The stainless steel part is nice
Jenny N.
6/25/2024
Oh my goodness! We will reach out so that we can replace the missing and broken lug nuts for you. Keep an ear to your email.
by: Calvin10/06/2023
I built my" tool shed" on a Triton aluminum trailer. I wanted doors on three sides. I do a lot of volunteer work at a Bible camp and it involves hauling my tools to the job. The trailer had 12x 4 inch wheels and I wanted something I more substantial to carry the load. I ordered the wheels and tires from etrailer. They came on time and we're exactly what I wanted. I have purchased other items from etrailer, and highly recommend this company
by: jiski08/02/2023
Adds a bit of class to my utility trailer. They look good, in fact, they look really good on my new galvanized wheels. I used my extra long breaker bar to snug them into place. I'm ready to roll. My trailer thanks you.
by: Stephen 07/09/2024
Bought these lug nuts because they are 3/4 inch. same size as on tow vehicle(Jeep) so lug wrench will fit. I made sure befor haveing a flat on the road
by: Harry06/24/2024
It is always a pleasure to receive items in great condition. Today I couldn’t be more pleased as the wheel nuts and wheel center caps were exactly what I ordered. The quality is excellent and the service was outstanding. Thank you Etrailer I’m totally happy with my purchase
Best Regards H Otte
by: Tony 06/23/2023
Nice chrome lug nut. Thanks :o)
Tony
6/24/2024
Great! After a year, no rust.
by: Greg03/16/2024
I recently purchased four wheels to upgrade my camper. Arthur, my etrailer tech support rep assisted with my questions and transaction. Arthur was very helpful, pleasant, knowledgeable and had the tech data available to help make the purchase easier. Sometimes buying over the phone assisted by a web site still leaves us wondering if we'll be getting what we expected. After receiving the wheels, caps and lug nuts I was very satisfied with the products. The wheels and style look great. I had new tires mounted on the wheels and the combo will definitely add to the appearance of my camper. From the time you order, delivery is very quick and the product is packed to prevent damage. I highly recommend etrailer.
by: J04/09/2024
Replacing 2-piece wheel nuts on my 2019 Grand Design Solitude 5th wheel trailer. Bought one lug nut to confirm fitment before buying a full set of 32 to complete the change over. The fit and finish was as advertised, so I purchased a full set for my trailer's tandem wheels.
by: Philip 05/10/2023
Well built seems one piece rather than justva cap over a lug nut. Perfect thickness for the rims i got from here
Philip
5/11/2024
Still going strong no rust and I use it on my boat trailer in salt water
by: Elliot08/05/2021
I bought these closed end lug nuts to replace the old worn out open end ones on my EZ Loader Boat Trailer. These should protect the studs better and look a lot nicer. The fit was perfect 1/2-20 for my axle. These axle hubs were rebuilt by me and changed from oil hubs to grease hubs with new bearings, seals and Brake Buddies obtained from etrailer.com. I also purchased the nice aluminum wheels and upgraded Load Range D Kenda Karrier tires, 175/80R-13 already mounted from etrailer. I thought the price was very fair and I didn't have to mount the new tires on the ugly original galvanized wheels. Great customer service as always and the parts are good quality. Ignore the brown haze on the wheels, it is just a reflection. The wheels are spotless and shiny!
Elliot
8/6/2022
Perfect, no issues at all and they look nice and have protected the studs better than the small open ended lug nuts.
by: John 04/13/2024
This is a project in the making. I noticed one of my OEM 2-piece wheel nuts had a split casing. I need to replace all 32 OEM nuts to avoid future problems. This order for 1 wheel nut was a test for my Dexter axle threaded studs. The fit and finish was perfect so I ordered 32 wheel nuts to complete my transition from 2-pc wheel nuts to solid ones. I’ll send photos when the change-over is complete. I’m thinking many other Grand Design RV owners may be facing a similar problem.
by: David08/02/2023
Good looking quality lug nuts and fast shipping, what else can I say.
by: Chris05/01/2023
I bought these lug nuts to compliment my new wheel/tire combo on my double jet ski trailer. The nuts have a nice chrome finish and appear to be high quality. 5 stars!
by: Roger 06/28/2024
Very good quality lug nuts, price was reasonable and shipping was prompt.
by: 7 Slot Collectibles05/10/2024
Perfect match for the aluminum wheels we also purchased from them.
by: Marlon04/24/2023
Great price. Only reason it’s not 5 stars is because I ordered 20 lug nuts and only received 5. The error was fixed quickly and the remainder of the lug nuts have arrived. Very fast response from them to my emails. I would definitely recommend this company
by: jth301/01/2024
EXACTLY what I ordered & received: Ten chrome plated 1/2"-20 American Trailer Wheel Lug Nuts. Promptly shipped. A perfect transaction.
by: George05/26/2021
These wheels(rims) were exactly what we we were looking for and we think this is a significant upgrade to our 2008 Jayco JayFlight G2 travel trailer over the original, somewhat worn old wagon wheel style rims that came with the trailer. The service from etrailer is just as important to this review as the wheels however.
We had a problem with one of the HiRun tires installed 5 yrs ago while we were on the road from North Carolina to Delaware. Upon closer inspection, and not being able to find DOT Codes, we decided to purchase new american made tires while on the road.
After sourcing the tires here near the beach in Delaware, I called etrailer and wound Talking to Tommy C. On Monday morning I ordered the four rims 4 center caps and 24 Lug nuts, and on WED.(!!!Missouri to Delaware in less than 48hours) they were at the tire dealers and ready to have the tires mounted on them. Friday on our way to the next stop we stop by the tire dealer, get the closest thing to a Pit-stop off with the old - on with the new, and up the road. Excellent Products with Outstanding Service!!!!
by: John07/21/2024
Items arrived as expected. Quick delivery. No issues. Excellent communications
by: Dana M.02/23/2018
These lug nuts really improved the looks over the smaller acorn type that my trailer came with. I like how the threads are not exposed anymore. I also found that it is very easy to scratch up your rims around the lug nuts with the lug wrench when you have the acorn nuts. These are much longer and the lug wrench does not even come close to rims anymore. They shine up nicely too. Nice way to upgrade the wheel area of your trailer.
by: Brian 06/22/2024
Significantly better than the cheap capped ones that come on yoir RV standard. These won't warp or strip nearly as easily.
by: Michael01/20/2018
These are very nice looking lug nuts, look great with new wheels I got from e-trailer
Mike C.
1/20/2019
Still very happy no issues with 4000 miles on them.
by: todd09/05/2024
Delivery was fast and easy
by: Richard 02/05/2024
Easy ordering, Quick shipping. the lug nuts appear to be well made and were reasonably priced
25
507
Show More Reviews
See what our Experts say about this Americana Accessories and Parts
- Length of Hex Socket Area On 1/2"-20 Americana Trailer Wheel Lug Nut # AM90049The Americana Trailer Wheel Lug Nut # AM90049 has a flat length of approximately 7/8" for your hex socket. We do have the Chrome Trailer Wheel Lug Nut # 12CLN-L which also fits a 1/2"-20 thread and has a 1-3/16" flat area for the socket.
view full answer... - Are Longer Wheel Studs Needed for Karrier ST175/80R13 Radial Trailer Tire with 13" Aluminum WheelThe Karrier ST175/80R13 Radial Trailer Tire with 13" Aluminum Wheel part # AM32001HWTB won't require longer wheel studs. They will however require new wheel lug nuts, the Americana Trailer Wheel Lug Nut part # AM90049. The wheel stud length will be the same for steel or aluminum wheels but you'll need longer lug nuts since aluminum wheels have a deeper recess for the lug nut holes.
view full answer... - What Size Wheel Studs Come On Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2KThe Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs part # e84YR uses standard 1/2"-20 lug studs. It actually comes with lug nuts as well so you don't need to worry about obtaining these separately. That said, these are designed for steel wheels so if you have aluminum then you'd need the Americana Trailer Wheel Lug Nut part # AM90049.
view full answer... - Switching From 4.80-8 to 4.80-12 Trailer Wheels and Tires With a 5 on 4-1/2 Bolt PatternFirst, I do recommend verifying exactly how much clearance you have. The Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel # AM30670 you are looking at is 20.7" tall while your Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel # AM30020 is 16.1" tall. The 4.6" difference will be 2.3" loss of fender clearance. It is recommended to have 3" of vertical clearance for suspension travel with the taller tires. The wheel that comes on the set above is lug piloted and will center...
view full answer... - Determining If 15" Lynx Aluminum Wheels W/ ST205/75R15 Tires Fit 2005 Wells Cargo TrailerThanks for the pictures! Based on your measurements our 2005 Wells Cargo Dual Axle Cargo Trailer uses wheels with the common 5 on 4-1/2" bolt pattern which is what the Westlake ST205/75R15 Radial Tire w 15" Lynx Aluminum Wheel - 5 on 4-1/2 - LR D - Silver # LHAW320 you were looking at uses. Since the # LHAW320 uses a ST205/75R15 tire just like what is on your trailer this will be a perfect fit for you. In addition the Americana Trailer Wheel Lug Nut # AM90049 will work though you will...
view full answer...
- Recommended Lug Nuts for Westlake ST205/75R14 Radial Tire with 14" Jaguar Aluminum WheelThe Westlake ST205/75R14 Radial Tire w 14" Jaguar Aluminum Wheel part # 274-000014 is designed to be used with long style acorn lug nuts like the Americana Trailer Wheel Lug Nut part # AM90049. The recesses on aluminum wheels is much deeper than steel wheels which is why you need the long style lug nuts which all have the acorn shape.
view full answer... - Hub Fit For 2,000 lb Dexter EZ-Lube Axle & Trailer Tire & 12 Wheel With 5 on 4-1/2 Bolt PatternThanks for all that info and yes, we can absolutely get you the correct hub for your Dexter 2,000 lb EZ-Lube axle that will accept a 12 inch wheel (which would be appropriate since it has the correct load rating). The correct hub is the following: - Easy Grease Trailer Idler Hub Assembly for 2K Axles # AKIHUB-545-2-EZ-2K This comes with the bearings, races, and grease seal so you don't have to purchase those separately. While it comes pre-greased, just for the future, if you happen to...
view full answer... - How To Measure Wheel Studs On A 5x8 Enclosed TrailerIn order to determine the correct lug nuts for your 5x8 enclosed trailer, you can use digital calipers like # PTW80157 and take the measurements shown in the image below. You are going to have to remove the hub to drive the wheel studs out. Once you have the measurements, let me know and I'd be more than happy to help find some lug nuts and replacement wheel studs for you. However, if you're still using the Westlake ST205/75R15 Radial Tire w 15" Lynx Aluminum Wheel # LHAW320, you can use...
view full answer...
- Recommended 3500lb Timbren Axle-Less W/ 4 Drop For 3000-3300lb Horse TrailerThanks for all of the information! The products you were looking at are all compatible. Starting with the Timbren Axle-Less Suspension I would go ahead and use the # A35RD545 as it has the 3500lb rating which will be perfect for your intended trailer weight, and already includes the 5 on 4-1/2" bolt pattern hubs that you were wanting. The # ASR3500S04 is the exact same spindle just without hubs, and would work perfectly with the # CE13515 you mentioned, but there is not really much of...
view full answer... - Is Americana Trailer Wheel Lug Nut # AM90049 Fine ThreadYes, the lug nut part # AM90049 does have fine threads size 1/2 inch 20 threads per inch.
view full answer... - Recommended Lug Nuts for Westlake ST205/75R14 Radial Tire w 14 Condor Aluminum WheelFor lug nuts to go with your # LH37VR you want them to have the standard 60 degree cone and fit 1/2"-20 wheel studs. If you want a chrome-plated steel I recommend the # AM90049. For a stainless steel option you can use the # KALN1375S.
view full answer... - What Size Wheel Studs Fit Through Trailer Wheel # AM20758The wheel bolt hole diameters of the # AM20758 is just slightly over 1/2 inch which allows only 1/2 inch wheel studs to fit through. You wouldn't be able to fit a 9/16 inch or larger stud through the hole. The lug nuts to be used with this wheel do have the 60 degree cone shape like the part # AM90049.
view full answer... - Need a Chrome 1/2"-20 Lug Nut to Be Removed with a 3/4" SocketGood morning, Greg! The Americana Trailer Wheel Lug Nut - Chrome Plated - 1/2"-20 # AM90049 you were looking at is exactly what you're looking for as it matches the sizing you need, the chrome plating, and it is removed with a 3/4" socket.
view full answer... - Overall Diameter of Loadstar ST225/75D15 Bias Trailer Tire & Wheel Definitely a smart idea to check, and the overall diameter when the tire is inflated is 28.1 inches, and the width is 8.4 inches for the Loadstar ST225/75D15 tire and wheel you asked about, which is the following part number: - Loadstar ST225/75D15 Bias Trailer Tire with 15" White Wheel - 5 on 4-1/2 - Load Range D # AM3S862 The other thing you will need (if you don't have them) are lug nuts, with the correct ones being the Americana Trailer Wheel Lug Nut # AM90049.
view full answer... - Recommended Wheel Caps for 15 Inch Wheels with 5 on 5 Inch Bolt Pattern The Dexstar Steel Spoke Trailer Wheel - 15" x 5" Rim - 5 on 5 - White Powder Coat # AM20428 will allow you to use the Trailer Wheel Center Cap, Chrome, 3.19" Pilot Size # 319EZ. This style cover is currently the only fit to give you a nice finished look. You can then use Americana Trailer Wheel Lug Nut - Chrome Plated - 1/2"-20 # AM90049 to complete the overall appearance.
view full answer... - Difference Between # AM90049 and # 12CLN-L Lug NutsOther than some slight cosmetic differences, functionally speaking both lug nuts you mentioned are identical. Both will fit a 1/2 inch wheel stud with a 20 threads/inch thread pitch, and can be tightened or loosened with a 3/4 inch lug wrench.
view full answer... - Chrome Plated Lug Nut Recommendation for Kenda Karrier Tire with 13" Black Mod WheelThe Kenda Karrier ST175/80R13 Radial Trailer Tire with 13" Black Mod Wheel # AM31990 installs on 1/2"-20 studs so for a chrome plated lug nut I recommend going with the Americana part # AM90049. This uses the 60-degree cone shape so it matches perfectly up with the trailer wheel. Attached are some review videos for you to check out!
view full answer... - Availability of Replacement Lug Nuts for Dexstar Vintage Steel Wheel # AM20312I show that the wheel lug size for Dexstar Vintage Steel Wheel # AM20312, which you reference is 1/2 inch x 20, therefore you will want Americana Trailer Wheel Lug Nut # AM90049. These trailer wheel lug nuts fit 1/2" diameter wheel bolts and are chrome plated for durability and corrosion resistance. I have included a video review of Dexstar Vintage Steel Wheel # AM20312 for you to check out.
view full answer... - Replacement Steel Wheels For A 1976 Airstream Tradewind There isn't a guide to tell us exactly what was on your 1976 Airstream Tradewind so you'll want to doublecheck the measurements just to be sure. For a 15" x 6" steel wheel with a 6 lug pattern and 1/2" wheel studs you could use the Dexstar Steel Mini Mod Trailer Wheel # AM20539. This wheel has a 6 on 5-1/2 wheel bolt pattern, which is pretty standard, but you'll want to verify the bolt pattern you have just incase the hubs have something unusual. You can measure from the center of one of...
view full answer... - Recommended Wheels and Lug Nuts for a Load Rite Boat Trailer With ST205/75/R14 TiresFor your Loadrite Boat Trailer with ST205/75/R14 tires, I recommend checking out the Kenda Karrier ST205/75R14 Radial Tire # AM34659. This is a tire and wheel combination that has a 5 on 4 1/2" bolt pattern, ST205/75R14 tires, and has a ply rating of 8 with a 2,200-lb maximum load at 75 PSI. For an upgraded lug nut Americana Trailer Wheel Lug Nut # AM26NR. These lug nuts will fit on a 1/2-20 wheel bolt, measures 1 1/2" long, and is made of stainless steel to help resist rust and corrosion.
view full answer... - Torque for Loadstar Tire With Aluminum WheelI have attached a sheet which shows the torque specs for wheels you can use when putting a tire and wheel. For 1/2" wheel bolts on a 13" aluminum wheel the torque is 75-85 ft.-lb. For lug nuts you can use the Lionshead Trailer Wheel Lug Nut # LHLR103 or Americana Trailer Wheel Lug Nut # AM90049.
view full answer...
- Determining Lug Nut Size for Sendel Trailer WheelIt is likely that you will need a lug nut like the Americana # AM90049 that threads onto 1/2"-20 lug bolts. That being said, the wheel itself does not determine the necessary lug nut size. The best way to determine the correct lug nut is to remove one and take it to your local hardware store. They should have a series of bolt that you can test fit the nut on to determine the correct thread pitch and diameter. I have attached a review of the wheel and lug nut for your reference.
view full answer... - Size and Capacity of Lions Head Arisun 205/50-10 Turf Bias Golf Cart Tire ad Wheel LHAWG50JS10BGolf cart wheel/tire # LHAWG50JS10B from Lions Head consists of an Arisun bias-ply type Load Range B tire with a shallow tread in size 205/50-10 that is mated to a machined aluminum split-spoke wheel with a 4-on-4 wheel bolt pattern. The entire wheel/tire assembly offers a 675-lb weight rating at its specified pressure of 30-psi and it carries an F speed rating, meaning it is good for speeds up to 50-mph. It is fully DOT-compliant and legal for on-road use. This is a excellent choice for...
view full answer... - 1/2"-20 Acorn Lug Nut That Uses 13/16" Socket and 1-1/2" LongIt sounds like the Kodiak Trailer Wheel Lug Nut # KALN1375S is the size that you are looking for. This lug nut uses a 13/16" socket and the overall length is 1-9/16" long. It fits the same 1/2"-20 wheel stud as the Americana # AM90049 but is stainless steel rather than chrome plated. These fasteners can be torqued up to 120ft-lbs as long as you have steel wheels. Please see the lug nut torque sheet below.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Installed by:
Jeff D
Updated by:
Laura H
Updated by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Allen
9/9/2024
Holding up perfectly. Has it been a year? Seems like 4 months. Good buy.