To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Pair this center section with a custom mounting kit (sold separately) to get a sturdy hitch for towing your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get total bed access.
Features:
Specs:
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (3788 Customer Reviews)
Pair this center section with a custom mounting kit (sold separately) to get a sturdy hitch for towing your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get total bed access.Shipping was fast but I realize I got the wrong B&W hitch when I ordered it I actually need # BWGNRK1384 for my truck how can I return the one I bought and buy the correct one.
Looks like I ordered the wrong hitch. Customer service was great and helped me order the correct hitch and helped me with returning the wrong part. Alison in customer service was very helpful!
Easy install!
Make sure you have two people for the job.
Very fast shipping.
Everything worked out great the only problem is the handle to pull the pin out is not long enough to go outside the wheel well so I had to add three more inches onto it other than that great product thank you very much
I purchased this to pull a 25Ton GN trailer with heavy equipment and so far it works great! Good price point and reliable product. I would highly recommend this product and trailer. Thank you!
Installation was straight forward and it's well built. Works smoothly. etrailer was awesome as usual with shipping and service.
However.... ;) on the BWGNRK1400 for '73-'87 GM trucks, the predrilled holes in the hitch for the safety chain u-bolts are 6-1/4" each way from center of the ball. This places the matching holes you have to drill in the truck bed on the sloped edge of the ribs, not in the center of the valley as intended. The instructions read as if the holes are not pre-drilled but they are, so I contacted B&W and asked if I can drill new holes at 8-3/4" each way of the ball so that they center in the next valley and they said no, that will void the warranty. So I had to do some bodywork, cut, weld and grind to scallop the ribs around the anchors to they won't always be sticking up (defeating the flat floor intent of this hitch design). I saw guy on [online] noted this was an issue on his squarebody bed as well.
B&W needs to look at this dimension for future installations to help out the next guy.
Great hitch! I'm a pretty avid do it yourselfer so I did the install myself and it was relatively simple. The directions that came with the hitch had all the information I needed. It works well with my trailer and the quality seems to be pretty good. It's pretty low profile while you're not using it as well. Overall very happy with it. A couple of install notes for squarebody Chevy, GMC trucks which is what I installed mine on: You will need to lift the bed off the frame just enough to slide the hitch between the bed floor and the top of the frame rails so if your truck is rusty like mine, you may want to have new bed mount hardware on hand before you start in case you have to cut the old bolts to get them out. Also, the safety chain loops land right on the ridges in the bed floor so they don't recess completely flush even when they're not in use but so far it hasn't been a problem for me. I saw that mentioned in some other reviews on here so I already knew before I bought the hitch.
This was the second Goose-neck mid bed ball to frame assembly I purchased from etrailer....this was for a V-8 Tundra; the first was for a V-12 dodge 2500; Both were absolutely spot on in terms of Hardware provided; Instructions; and actual holes already in the respective frames to line up to the hitch frame mounting steel; beyond that I got digital brake/level controllers from these guys for the Tundra and it was mint....cannot speak more highly of etrailer to get the stuff you need to haul....its obvious these guys actually get the kit first then see if it fits...on an actual truck...then order and distribute it when it does...10 out of 10 for etrailer
Overall this Installation went as I anticipated, 4-5 hours; it's not for an unprepared amateur. I strongly recommend watching the Installation Video, but more importantly, disconnecting the wiring harness (from both sides, there's 3 connectors) that cross over the rear cross member above the Differential. Disconnecting the rear exhaust was a MUST DO for us (my son helped me) as is a second person. Patience was our friend during this entire Installation for both of us. The brake line that crosses over to the passenger side was of concern to me, and got in the way as well; in the end it is below this entire installation. However there is a Mount Block on the driverside that creates a problemwith getting one bolt into place; a "Fishing Spring" (spring wire that wraps around the threads with long tail to fish/thread/pull thru the hole) would have helped to get this into place. (SEE PICTURE) Once in place the head is able to be held with a narrow spanked wrench while tightening. The rear center bolt is a HUGE challenge to reach once everything is in place and you're torquing things to spec.I had to purchase a "3/4" Crowsfoot" to get this and some of the others because of things blocking access with a socket (not talked about in the video or Installation Video). Once everything is in place and Reconnecting electrical plugs we found that there was enough gap/spacebehind the Kit Rear Cross Bar, over the vehicle rear cross member, to run the driver side electrical. Pay attention to have the "male" plug facing inboard to give you enough slack to reach the passenger side plug. A couple of zip-ties were needed to keep this inplace. See picture for how I routed this and the vent tube to avoid the heatshield.
I've got a 26 foot Keystone Cougar 5th wheel RV Trailer that I be using this, along with an Andersen 3217 hitch. With this B&W Hitch I don't have the 5th wheel Rails across the bed full-time anymore of my 2022 Ram 1500DT 4x4.
Great product with good instructions. I was able to install myself. For the lifting of the center piece. I used a ratchet strap and something going across the top of the bed to hold it in place while I was under the truck. Just had it long enough to go through the hole and catch the pin with the hook. I then went into the bed and ratched it up a couple times to fit it in the hole. Worked great as an alternative for extra hands.
After having this hitch for a year I can’t say I’m too impressed. They claim the powdercoat on it is durable, but after only a year there’s already spots of rust. The pictures I’ve included are only showing a few spots I’ve noticed. I painted the pieces that sit against my frame with frame paint in hopes that doesn’t rust either. But the outside facing pieces, I haven’t touched. My truck is stored in the winter and the hitch hasn’t even been used yet since purchase. I’m sure it performs well since my last gooseneck hitch was B&W. But as for durability, I don’t think they do as well anymore. It shouldn’t be this rusty only after a year, being stored, not seeing salt or even being used.
I was converting a fixed/welded gooseneck ball on a CM flatbed to a removable one so I could also use a B&W Companion Flatbed Gooseneck to 5th Wheel Trailer Hitch adapter. Although it wasn’t easy to find someone to cutout the old ball and install the new turnover ball, it was done expertly and the hitch works perfectly! Very easy to operate from the wheel well and turn over for a flat area for cargo. Always had a turnover ball in the past and highly recommend this one for a conversion.
The hitch is beefy and seem to be very strong. My guess is the truck frame will give before the hitch. Great quality. I very happy! I'm an above average backyard mechanic and found the installation doable, but a little of a challenge. Differently need a help. My wife was a big help. I use a 2X4 across my bed and a ratchet strap to lift and hold the center section in to position. I also had to reposition my exhaust pipe where it goes over the differential to get some clearance. Also, I had to drill out one of the square holes in the tailpipe L bracket to receive the factory bolt.
Top quality , heavily and sturdy parts. Easy to follow instructions. Best things....made in USA and good price!!!
Not my first B&W....and won't be my last either. Installation photos to follow.
Great instructions.
Grab a buddy to help install a few items as it may take two sets of hands.
Make sure and tighten the plate to the cross members before tightening to the frame.
High quality just as expected. Been flawless in its use thus far. B&W has and always will be my go to for trailer hitches.
It’s been about a year now of use with my gooseneck trailers. What a great improvement from using the hitch under the bumper. Still solid and functions flawlessly. Make sure to lube the pin that locks the ball, if grime gets in there it gums it up and doesn’t release it completely.
This was my first order I placed with et etrailer. If one work could say it I guess it would perfect! I ordered on a Tuesday arrived on Thursday. I Placed the order got conformation and a name and contact to call if I had any issues, once it arrived I got another email letting me know if had been delivered. The installation video was perfect made it’s easy to install just followed the steps. When I need any trailer related items I will use them. As far as the B&W hitch i put it in a 2017 Ram 2500 with Ram boxes. The fit and quality of the hitch and design is what I have come to expect from B&W. I got this hitch to pull a gooseneck horse trailer. If your wondering if it will work with Ram Boxes it will.
Do you have a question about this Accessories and Part?
Condition: Surface Scratches
Notes: Item has cosmetic dings/scratches present.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.