This replacement unit fits into the B&W Turnoverball underbed gooseneck hitch on your flatbed truck to provide the base for the B&W Companion fifth-wheel trailer hitch.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to be taking a look at the B&W replacement base for the B&W Companion Flatbed Fifth Wheel Trailer Hitch. Part number is BWRVB3055. Now whether you just needed the replacement base because yours was damaged or you didn't want to re-buy the entire system and you took this head off your existing companion to put on here, at this point you're going to have all the same great features we're used to out of the companion hitch line.The companion fifth wheel for flatbeds is really going to give you the best of both worlds in towing. You have your gooseneck that's already installed. You want to be sure you have a B&W under bed gooseneck mount hitch installed. Then this is just going to be something you can fit in and get it torqued down with just a single bolt.
So it really makes it quick and easy to switch between a fifth wheel if you need it, go back to your gooseneck. The thing I like with this fifth wheel, when we don't have it installed we're going to have full access to our truck bed, so it's going to go right back flat, one of the big benefits of that turnover ball system. You're not going to have a ball sticking up in the middle of the bed or rails running side to side.This particular truck is going to have the CM truck bed's ER bed. This is going to have the recess in it. The overall width of this is about 18", and they've designed the B&W to fit right down in there.
It's going to have a total footprint width of about 17 3/4". Just so you know, from the back of it to the front here it's about 18". Not only does it work with the recessed style like we have here, but also your traditional style flatbed, which would just have a single plane all the way across.We've had a lot of good experiences with the B&W hitch line, but to go a little bit further we like to look through what our customers had to say. One that really stood out to me was from Greg W. He said, "The hitch works perfectly.
Easy in and out when I need the whole truck bed. Awesome product."We've talked about why we would want the flatbed companion. Let's take a little bit deeper look at some of features and what really sets this style apart from others available on the market. The one thing I like about this style setup is is an all-in-one unit. We could find an adapter that we could put down into the gooseneck and secure it down that would have fifth wheel rails.
It kind of looks like an H. Well, then you have to get a fifth wheel head to then put in your truck and add into those rails. By going this route, it's going to give you the solution all-in-one unit with one bolt to tighten down. You're not going to have multiple steps to getting this in and out, and I really like that.Another thing I really like about this companion setup, and really all of the B&W fifth wheel products are the ease of use with our handles. This is going to have a nice long handle, and right up here it's going to offer a cam lever design. As we open this, regardless of how much pressure we're putting on the dual jaws, we'll just release our clip here and with that long lever and that cam design it makes it really easy to open up our jaws. So even if our trailer has a little twist left or right, maybe it's pulling back a little bit or pushing forward a little bit, it's going to be no issue releasing the jaws.The jaws are also very high quality. You can see they're going to be 1" thick. We've got dual jaws, so we've got one that's going to come in from each side and we've got a perfectly machined hole here to hold our kingpin. What that does is . Put our mock kingpin in . it's going to reduce any of that forward and back or left to right movement. That can lead to that chucking feeling that we sometimes get when starting and stopping, but also leads to noise. So by having that nice, snug fit we're going to help to eliminate both of those.We also have a fully articulating head. That's going to help to ease when we're hooking up and when we're disconnecting. Not only will it articulate front and back, and you can see if it gets pushed forward, it naturally wants to come back to a slightly tilted back position. That makes it easy when hooking up your trailer. But also, the side to side. Unfortunately, we don't always get to park on level ground or something like that when we need to unhook. If we have any kind of twist in there, the head will go with that. With that articulation it's going to help to eliminate any issues with our handle being jammed and our kingpin getting hung up as we try to unhook.As far as weight ratings go, we're going to have a 5,500 pound maximum vertical load limit. That's the maximum force we can put downward on the head. It's going to offer a 22,000 pound gross trailer weight rating. That's going to be the total weight of our trailer and anything we might load up on it. Of course, you do want to check your owner's manual of your vehicle as well and not exceed its tow rating.When you're ready to remove the system, it's really quite straightforward. You'll want to start by removing the pin and clip located on each side. Now, with both of those removed, we'll lift up on the black handle on each side, lift straight up, and as you can see our pins are going to stay attached. The head's going to ride on the polyurethane bushings we have here on each side. The biggest advantage we're going to have with the polyurethane over the older rubber style is really that these don't deteriorate or get misshapen nearly as much as the rubber did. These are going to last a lot longer. We can put tons of miles on these and we're really not going to have to worry about them wearing out. Then, to remove the base, you just want to loosen up the center bolt. That's what holds it down to the bed. At that point, we can just lift it up and out.Securing our kingpin to our truck bed, you can see this strap right here. That's going to use the pin from our B&W head. It's going to pull down on the fifth wheel. That's going to compress the rubber pads we have on all four corners and ensure a nice, snug fit so we don't have to worry about any twisting.Now we can show you the installation process. The first thing you want to do is retract your pin. Then we can place the base right down and in, and we release our pin. Next, you'll want to tighten down your center bolt to the specifications that are listed on the base here and also in your instructions. Next, while using our black levers both to hold the head and keep the locks open, we'll slide that down in place, release it, and put in our pins. We'll secure those pins with our clips. Once we have both sides done, we'll be ready to hook up our trailer and we can hit the road.For additional security, we can replace the handle locking pin with the standard lock. You'll want to use a 5/16 inch diameter shank. It will need to be at least an inch and a quarter deep, and at least 3/4" wide. The opening should be at least 3/4", and that should be at least 1 1/4" tall to make the connection.That's going to complete our look at the B&W Companion Flatbed Gooseneck to Fifth Wheel Hitch Adapter, part number BWRVK3050.
Average Customer Rating: 4.9 out of 5 stars (21 Customer Reviews)
This replacement unit fits into the B&W Turnoverball underbed gooseneck hitch on your flatbed truck to provide the base for the B&W Companion fifth-wheel trailer hitch.Great experience shopping with etrailer on time shipping easy process. I even spoke to rep about questions I had on the base and was extremely helpful. It’s now installed on my rig and will no longer brake my back when having to pull off the original base. Flatbed BW hitch base is the way to go for flatbeds!!!! Thank y’all!
The companion works great in my current setup. I have both a kingpin/5th wheel trailer and a goose neck trailer. Quick and easy change for which trailer I am hauling that day.
As always, excellent service and product from B&W and etrailer!
The quality that you expect from B&W. And and like always the shipping was fast
Great price and quick service
Top quality, welds are perfect. Good engineering went into the design. I am sure we will be very happy with it.
good service, good product,,recommen ed
Prompt and courteous service my order was handled perfectly and promptly
Thank you etrailer
This hitch base is perfect for keeping my camper close to the same height since I took my truck's original bed off and fabricated a flatbed dump in its place. The total height of my fifth wheel with this replacement base on only 3" higher than before, which I can certainly live with. eTrailer gave me a great deal because this part had previously been installed and also shipped lightning fast as always.
Fast service
I am happy with my purchase it is exactly what I needed.
had what I needed and shipped immediately, received before anticipated date
These guys really helped me out with an issue I had with a product! Very helpful and supportive. I will continue to do business with these guys
Thanks for the prompt delivery I already have one of these from B and W so I'm sure this one will be great also.
thanks,
Joe
I haven't tried it yet ..it is getting installed
Great service and product
Do you have a question about this Accessories and Part?
Condition: Installed
Notes: Item hgas been previously installed and has cosmetic install marks.
Condition: Installed
Notes: Item has been previously test fitted and has minor cosmetic scratches and install marks.
Condition: Surface Scratches
Notes: Item has cosmetic scratches.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.