Backing Plate for RR06 Recessed Swivel D-Ring Tie Down
(19 reviews)
Price: $8.18
In Stock
Backing Plate for RR06 Recessed Swivel D-Ring Tie Down
Item # BP06
Our Price: $8.18
In Stock
- All Info
- Reviews (19)
- Q & A (0)
- Videos (1)
- Photos
Brophy Accessories and Parts - BP06
- Tie Down Anchors
- D-Ring Backing Plates
- Brophy
Tie-down reinforcement plate for recessed swivel trailer tie-downs. The plate is is placed under the surface of the tie-down location to offer greater support than just the wood.
Features:
- Adds extra support to tie-down
Specs:
- Weighs 0.74 lbs
- Designed for RR06
BP06 C.R. Brophy Machine Works Backing Plate
Video of Backing Plate for RR06 Recessed Swivel D-Ring Tie Down
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Brophy Tie Down Anchors BP06 Review
Today we're going to be taking a look at part number BP06. This is the Brophy Backing Plate for recessed swivel D-ring tie-down. This backing plate is going to fit part number RR06 perfectly. That D-ring is going to be sold separately. This is made from a steel construction. This is going to add support to the tie-down. The plate would be placed under the surface of the tie-down location to offer greater support than just the wood or just the surface that you're mounting it to.
Again, it's just designed to add that extra support needed. Very light-weight. It only weighs about .74 pounds and, again, it is designed for part number RR06, which is sold separately and it can be found right here on our website. We're going to go over some measurements of the backing plate real quick. It's a square design, so it's going to give us a measurement of 6 1/2 inches by 6 1/2 inches. The diameter of the hole here in the middle is going to be about 4 and 5/8ths of an inch.
The mount hole separation, measuring center on center, the distance between the mount holes looks like it's 3 and 3/4 of an inch. Again, square design, so that's going to be the same between all of the holes. The diameter of those mount holes looks to be about 3/8ths of an inch. That's going to do it for our review of part number BP06. This is the Brophy Backing Plate for recessed swivel D-ring, part number RR06. .
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Did not arrive in time
Customer Reviews
Backing Plate for RR06 Recessed Swivel D-Ring Tie Down - BP06
Average Customer Rating: 4.7 out of 5 stars (19 Customer Reviews)
Tie-down reinforcement plate for recessed swivel trailer tie-downs. The plate is is placed under the surface of the tie-down location to offer greater support than just the wood.by: Dwayne C.10/18/2016
Brophy swiveling D ring tie downs are pretty awesome. Super heavy duty, really like the Swivel design. By having the freedom of movment the ancor is never in a bind, at any angle and tension is pulled evenly from any direstion. The matching backing plates are a must as far as I'm concerned. Installation was easy. All holes on the backing plates ligned up well. No issues. 4 1/2" hole saw is perfect for the D ring tiedowns just a little helpful info. I will give it up to etrailer.com also for the fast shipping. It means alot when you have a project going on. Over all satisfied with my purchase.
by: David 06/21/2023
Exactly what I needed
by: Jeeper07/04/2016
Back plate fit tie down great - holes lined up, but they were too thin for my application.
by: James 08/12/2018
Purchased these to go with the d ring anchors. Again Molly helped me find exactly what I was looking for. I chose to purchase my own hardware because I wanted to use stainless carriage bolts
by: Drew 10/08/2021
The tie downs have worked well; these were installed on the backside of all of them
by: Charles B02/04/2013
I do not have the items installed as of yet, but received them on time and were in excellent shape. Should work nicely on my trailer.
Will be using etrailer.com again. Thanks!
by: Rick C.10/25/2013
Received product promptly, fits the tie down great.
by: Chris05/20/2016
worked great , could not get local so found them here at a great price and fast shipping !
by: Josh J08/06/2015
Fits well and the plating looks nice. Material is about 1/8" thick and seem sufficient for the job
by: Texas2312/19/2014
Thanks for the fast service...great qua lity!
by: Dr joe04/14/2017
Very sturdy and nice looking.holes match up fine with the floor rings
by: James gallagher06/17/2017
Everything that I order was great.
by: James gallagher06/17/2017
Everything that I order was great
by: Ted 07/07/2023
by: Milt Wade05/01/2015
They look good.
by: Bruce 09/19/2022
by: Frank 11/23/2022
by: Dana04/12/2012
Great!
by: Joseph 07/13/2021
19
19
See what our Experts say about this Brophy Accessories and Parts
- Dimensions of the Brophy # BP06 Backing PlateI went out into our warehouse and measured the Backing Plate # BP06 and found that the outside dimensions are 6-7/16 inches by 6-1/2 inches. The circle in the middle has a 4-5/8 inch diameter and the overall thickness of the metal plate is .11 inches The bolt holes have a distance of 3.80 inches apart with a diagonal measurement of 5.40 inches. See picture.
view full answer...
- Hold Down Pins That are at Least 2-1/2 Inches LongFor hold down pins that are at least 2-1/2 inches long, there are the 3 inch long pins that come with the Shoe Hold Down Spring for 10" Trailer Brake Assemblies # BP06-120. These pins are not available individually, they do come with the springs, and fit 10" x 2-1/4" Dexter, Bendix, and Demco/Dico electric and hydraulic brakes.
view full answer... - Can the Brophy Swiveling D-Ring Tie Downs Be Used To Secure a 5,000 Lb Vehicle with Backing PlateThe Brophy Swiveling D-Ring Tie Down Anchor part # RR06 with the Backing Plate for RR06 Recessed Swivel D-Ring Tie Down part # BP06 are a great, easy to install set of tie-downs which can be used for securing a vehicle. The tie-downs themselves have a 2,000 lb working load limit. That said, you will be limited by the attachment point if lower. It would be very difficult for me to give a definitive answer of the weight capacity limits of your floor so for this I must recommend you reach...
view full answer... - How to Determine Proper D-Ring Spacing In an Enclosed Car Hauler TrailerSince you are planning on installing these Trailer D-Rings # RR06 in a plywood floor I would recommend you also get the Backing Plate # BP06 to offer better support than just the wood of your trailer floor. As far as the placement of them in your trailer, you will need to consider what vehicles you will be transporting. If it will be only one vehicle I would recommend loading that car in the trailer and then strategically place the D-rings to give you the best possible mounting points...
view full answer... - What are the Dimensions of the Brophy D-Ring Tie Down RR06I pulled the Brophy Trailer D-Ring Tie Down, # RR06, from my warehouse to measure and verified that the diameter of the flange is in fact 6-5/16 inches. I also verified that all other measurements on the product page are correct. I have attached the photo of the dimensions for you to reference. We recommend using the backing plate, # BP06, with this tie-down to provide extra support when securing cargo.
view full answer...
- Backing Plate Availability for the Brophy D-Ring Anchor RR06For the backing plate of the Tie Down Anchor part # RR06 you would want the part # BP06.
view full answer... - Depth Needed To Mount Trailer D-RingI pulled a trailer D-Ring from our warehouse and took a measurement for you. the depth of the D-Ring housing from the bottom of the flange with the mounting holes is 7/8 inches. The 1/4 inch mounting holes are spaced 3-3/16 inches apart. The mounting plate you would use under the surface you are mounting the D-Ring to, is part # BP06. This would offer much more support than just wood.
view full answer... - What Size Mounting Hardware is Required to Install the Trailer D-Ring Tie Down, # RR06The Trailer D-Ring Tie Down, # RR06, has mounting holes that are 1/4 inches in diameter. We recommend using backing plate # BP06 when installing this tie down to provide support for the tire down.
view full answer... - How to Mount the D-Ring to a MC10 Motorcycle Trailer for Strapping in a Honda GoldwingYou would need to drill a hole that is 4-3/8 inches in diameter for the base to fit through and then use nuts and bolts appropriate for the surface it is mounted to in order to secure it. It is recommended to use the backing plate # BP06 under the surface where the D-Ring is installed to maximize its capacity and offer support. In order to drill out the hole you can use a large enough hole saw drill bit or use the backing plate as a template and a pencil to mark the diameter needed and...
view full answer... - Parts Needed to Mount the Swiveling D-Ring on a Steel Deck TrailerAs long at you have the appropriate size bolts and hardware for the D-Ring Tie Down Anchor # RR06 you will not need the backing plate. The backing plate # BP06 wouldn't offer your D-ring anymore support than the steel frame itself would, but it could come in handy as a nice template for drilling the holes in your equipment trailer.
view full answer... - Length of the Pins in the Shoe Hold Down Spring part # BP06-120I went out into our warehouse and measured the pin of the Shoe Hold Down Spring part # BP06-120 and found that it measured 3 inches.
view full answer... - How Many Springs Come with the Shoe Hold Down Spring # BP06-090 When you order a quantity of 1 of the Shoe Hold Down Spring # BP06-090 you get 2 springs and 2 pins.
view full answer... - Hardware for Brophy Swivel D Rings Part # RR06Installation hardware is not included with the Swivel D Ring part # RR06 due to the unknown nature of the surface that the end user will attach it to. Depending on the weight of the object that will be held down, and the thickness of the surface it will be attached to, you also might want to consider the backing plate part # BP06.
view full answer... - How to Install the Trailer D-Ring Tie Down # RR06 on a TrailerIf you look below the specs for the Trailer D-Ring Tie Down, # RR06, you will see that the lip is wider than the base . You would need to drill a hole that is 4-3/8 inches in diameter for the base to fit through and then use screws appropriate for the surface it is mounted to in order to secure it. It is recommended to use the backing plate # BP06 under the service where the D-Ring is installed to maximize its capacity and offer support. In order to drill out the hole you can use a large...
view full answer... - Brake Shoe Retaining Pins and Springs for 10 Inch Electric Trailer Brake AssembliesIt sounds like you are looking for shoe hold down spring pins such as those included with the kit, # BP06-120. The kit comes with the 2 springs and 2 pins for 10 inch brake assemblies.
view full answer... - Replacement Brake Shoes for ALKO 12 x 2 Inch Electric Trailer BrakesWe do have replacement brake shoe and lining for Hayes/ALKO 12 x 2 inch brakes. It is # BP04-185. The hold down spring, # BP06-090, is sold separately. I'd have to get the bearing numbers that are in your current hub from you or the dimensions of the spindle where the bearings ride to determine what you'd need.
view full answer... - Availability of CR Brophy D-Ring Tie-Down Without Countersunk HolesWas it the holes themselves you weren't wanting, or the fact that they're countersunk that you don't care for? Brophy doesn't make a similar tie-down anchor without holes, but they do offer some with holes that aren't countersunk like part # RR05 with a 5K max load, or 1600 lb safe working load limit. There's also the # RR06 with a 6K max, 2000 lb safe working load limit. For a more secure installation, there's backing plates available, if you went with the # RR05, you'd use the # BP05...
view full answer... - Replacement Brake Linings/Shoes for Hayes/AL-KO 185100-150 12-Inch Trailer Brake AssembliesThe replacement brake shoe and lining for the Hayes/AL-KO # 185100-150 brake assembly is part # BP04-185, which includes shoes/linings for one wheel. The hold down springs/pins for one wheel is part # BP06-090.
view full answer... - Replacement Shoe Hold Down and Return Springs for 10 Inch Atwood Electric Trailer BrakesAccording to my contact at Redline, the parts you need are Shoe Return Spring, # BP07-105, that you have referenced, and Shoe Hold Down Spring, # BP06-120. We also have the shoe/linings, # BP04-120.
view full answer... - Compatibility of Parts for Military TrailerThe parts you listed will need to be compatible with what is on your M101A3 military trailer, rather than the trailer itself. For example, the Master Cylinder # 10614 and Replacement Shock Absorber # 1844-2 are for Toledo brake actuators; if that is what you have on your trailer, then these parts will work. The same is true of the Wheel Cylinder - RH # BP17-020 and LH # BP17-030; they are replacements for 10" and 12" single serve brake assemblies manufactured by Dexter, Bendix, Dico, Demco...
view full answer... - Trailer Brake Spring Kit For 10 x 1-1/2" Brake ShoesIf your brake shoes# bp04-065 are 10" x 1-1/2" you will need these brake springs # K71-362-00. The springs you were looking at # BP06-120 were for 2-1/4" shoe width.
view full answer... - Replacement Parts for Dexter Nev-R-Adjust 12 x 2 Inch Electric Trailer BrakesThose are 12 x 2 Dexter brake assemblies, 5200 capacity, with 5 bolt mounting flange. But the Nev-R-Adjust brakes on these axles should be the 12 x 2 inch brakes. We have several parts available including the following: Actuating Arm, Left Hand, # BP02-230 Actuating Arm, Right Hand, # BP02-240 Shoe Hold Down Spring, # BP06-090 Shoe Return Spring, # BP07-105 (works on left or right hand sides) Adjuster Plugs, # BP10-220 Adjuster # BP10-060 (these are regular adjusters so you may need to...
view full answer... - Replacement 12x2 inch Brake Assembly RecommendationThere isn't a standard pin length for 12x2 brake assemblies. If you are looking for replacement parts for your current brake assemblies your best option would be to first determine what assembly you have as a lot of the parts are brand specific. Most axles do have the mounting flange for the brake assemblies welded to the axle. Most likely the easiest option you would have would be to replace your 12x2 inch brake assemblies as typically this is the cheaper route. For a left hand 12x2...
view full answer... - Replacement Spring Parts for 10" Hydraulic HD-1377-10 Brake AssembliesTo replace the springs on your 10" hydraulic drum brakes you'll need the following: - Shoe Return Spring Kit # BP07-105 - Replacement Adjuster Spring # 046-083-01 - Shoe Hold Down Spring Kit # BP06-120
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jameson C
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.