Bulldog Winch On-Board Air Tank - 1/2 Gallon - (6) 1/4" NPT Ports, (2) 3/8" NPT Ports

Video Transcript for Bulldog Winch On-Board Air Tank Review

Today we're going to take a look at the Bulldog Winch 1/2 gallon on-board air tank.Now this on-board air tank will let you store and transport compressed air on your Jeep, truck, RV or other vehicle where limited mounting space is available. This is perfect for use with tire inflation, air horns, air lockers and other small air tools. This does hold 1/2 gallon of compressed air.You can see all the fittings on it, actually has two large fittings right here on the front. These are two 3/8" size female NPT ports, and then it has one, two, three, four, five, then one on the bottom, six 1/4" female NPT ports.It is a steel tank, has a nice black e-coating. It's corrosion resistant. The included hardware, has the included mounting hardware to let you easily mount this tank to your vehicle.

And the tank capacity is 1/2 gallon, we mentioned the inflation ports is six of the 1/4" and two of the 3/8" NPT ports. Maximum psi on this tank is 150 psi.And I do want to give you some dimensions. So we're going to start with the width, and the width I measure from this port all the way to this port. So you're going to be looking right at 6 7/8" wide. The heighth will be from the bottom of the mounting bracket all the way up to this top port, 8 3/16" tall.

And the total depth, again, is going to take the ports sticking out into consideration, so you're going to be right at 5 1/2" deep.Now the mounting bracket on the bottom here, overall width on that is right at 5". The depth on it, is right at 1 3/16" deep. And the mounting holes, the two on the bottom, measure center-to-center of 4".Now we also offer different types of fittings for this air tank, like the drain cock for the bottom here, safety valves, air line fittings, and they are all listed on this product page as related products.But that should do it for the review on the Bulldog Winch 1/2 gallon on-board air tank.