Weld this female pipe mount to your trailer's frame to provide the mounting point for the male pipe on your swivel jack. Fits 3-1/4" male pipes with a 7/8" pin hole.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Bulldog Weld On Jack Pipe Mount. This tube welds on to your trailer and provides the attachment point for your pipe mount swivel jack. This is a female pipe that pairs with the male mount on your trailer jack. This piece allows your trailer to swing up along the trailer frame for travel and back down for when you're ready to use it.It's made from a durable steel construction. It features a raw finish, so it's ready to be welded. The holes for the pin have diameter of seven-eighths of an inch.
This is designed to fit a three and one quarter inch male pipe mount. So if we take an inner diameter measurement, should be just over that three and one quarter inch mark, and it is, it measures three and one-eighth of an inch. So it won't have any problem . Excuse me, it measures three and three-eighths of an inch, so it won't have any problem accepting that three and one quarter inch outer diameter male pipe.Measuring edge to edge going this direction, that's going to measure about two and thirteen-sixteenths of an inch to two and seven-eighths of an inch. The overall diameter here, outer diameter is right on four inches.
And this is made from five-sixteenth inch thick steel. You'll get one pipe mount with this part number. The other measurements that I want to mention for you, I took a measurement from the center of this hole to the edge of the mount and got a measurement of one and five-eighths of an inch. From the edge of the mount on this side to the center of the hole measures about an inch and a quarter.That's going to do it for today's look at the Bulldog Weld On Jack Pipe Mount.
Average Customer Rating: 5.0 out of 5 stars (5 Customer Reviews)
Weld this female pipe mount to your trailer's frame to provide the mounting point for the male pipe on your swivel jack. Fits 3-1/4" male pipes with a 7/8" pin hole.I recently had the occasion to find your website and found the trailer jack I needed to satisfy my customer at the right price but did have some questions and called before placing my order .Brenden C. was most helpful and answered all my concerns quite knowledgeably and placed my order for me then and there .Brenden also gave me an approximate time it should arrive and he was dead on . Thank you Brenden for all your help and quick service.
Was delivered on time. Good service.
perfect fit.
Wonderful customer service. Shipping was fast and correct.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.