Don't Miss These Holiday Savings!
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These brackets let you mount a 7" wide polypropylene fender to your single-axle trailer. Pre-galvanized steel construction can be primed and painted. Requires 3/8" bolts (sold separately). One fender requires 2 mounting brackets.
Features:
Specs:
These brackets make it easy to mount a fender to your trailer. Simply bolt each bracket to the underside of the fender using the 2 holes on the long end of the bracket. Then bolt each bracket to your trailer using the single holes on the short end.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (74 Customer Reviews)
These brackets let you mount a 7" wide polypropylene fender to your single-axle trailer. Pre-galvanized steel construction can be primed and painted. Requires 3/8" bolts (sold separately). One fender requires 2 mounting brackets.These are the perfect brackets to hold the plastic fenders on the trailer. I recommend buying the carriage bolts and nuts from etrailer too. I did put a small lockwasher between the nut and the fender. This made the carriage bolts tighten up for a perfect fender mounting job. The mounted fenders do not rattle or shake. Highly recommended. You don't want your fender in the middle of the road after it falls off. Put it on right.
I purchased these plastic fenders and mounting brackets to upgrade my Jon boat trailer. They arrived on the date promised - very customer friendly ordering system! I needed to make a minor modification on two brackets for my trailer. I'm very happy with these fenders and mounting brackets - both resulted in exceeding my expectations for looks and design! Keep up the great work e-trailer!
Worked great for hanging new Fulton step fenders on my kayak trailer. I did have to shave down the inside edge of each fender about an 1/8 of an inch for clearance, but otherwise perfect and the new fenders are mounted much more securely than the originals that came with the trailer. The original fenders mounted with two bolts through the inside skirt of the fender allowing them to flex on rough sections of road causing stress cracks in the skirt within the first year of use. I don't see that being a problem with these mounts and the fenders no longer flex at all.
The folks at etrailer are always very helpful and knowledgeable. I’ve ordered quite a few items here and it has always been a pleasure to do business with them. Also good prices and fast shipping.
I painted these brackets silver to match the fenders and they work perfectly. The fender does not touch the body of the trailer. It's a little more than a half inch away from the side wall of the trailer.
I will definitely order these brackets again.
Perfect fit. Thank you!
These brackets work great with the plastic fenders I purchased.
thankyou, these fit the fenders we orde red.
Worked well with the plastic fenders for a small fishing boat trailer.
Nice bracket for attaching fenders with pre-drilled holes spaced 2,5" apart
The holes for mounting to the fender should be square to allow full flush mounting of a normal 3/8 carriage bolt
They look great
Just installing them today, but website, service delivery costs are all first rate,
I wish I had taken before and after photos of my trailer. A typical 5x8 utility trailer with the extruded wire mesh deck which I got for a bargain, perfect for my lawn tractor or 4 wheeler. However the 8" wheels did not provide enough ground clearance for the terrain where I intended to use it as a equipment hull trailer to our deer camp, pulled by the 4 wheeler. After finding etrailer.com my problems were solved! I ordered 5 bolt hubs, 5.30 x12" wheels and the economy plastic fenders and fender brackets. While waiting my order I wire wheeled the frame and gave it a fresh coat of paint and WHAL-LA! I have a new looking trailer! The order arrived in record time, securely packaged and great quality! I ordered the pre-packed hubs and didn't have to get into that sticky mess! Everything worked out as planned and was easy-peezy to assemble and install. I'll definitely use etrailer.com in the future.
Hold the plastic fenders on just fine.
Exactly as advertised - quality products. Instructions + Service + Delivery all far above the average mail/on-line order company. I will definitely be recommending etrailer to others over time. Thank You!
My original fender brackets on my trailer both broke due to metal fatigue. I ended up losing both fenders. I purchased these over a year ago and they are tough enough to secure the fenders with no issues.
Good heavy brackets, .125" thickness (11 ga). If used with the F008550 plastic fender they give a standoff of 7/16" between the fender and the body.
Rick P.
6/28/2016
Great.
Fender brackets showed up on time, installed right away with no issues.
Michael
1/31/2019
Still attached, still keeping crap from flying up
I couldn't believe how well made the brackets are, they fit the fenders exactly. Now I don't have to be concerned that a bracket is going to break or rust off!
Excellent brackets, used existing holes on trailer and bolts, very happy
Works as advertised
I am very pleased with the prompt delivery of the fender and brackets. It was exactly what i needed to repair my trailer.
good product. excellent costumer support. contacted me when part was on back order and provided alternate replacement. fast shipping.
Customer service review: Outstanding! Received a phone call within 12 hours notifying me that items in this order were out of stock. They managed to fill the order and deliver it within my original time frame. The trailer gets its shake down cruise shortly and I'll review the components from this order afterwards.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bill S.
2/23/2018
Excellent product. Ive experienced absolutely no negative issues with this product or the company - etrailers. Great purchase!