To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This adapter is specially designed to attach to the receivers in your Ram's factory, underbed 5th-wheel towing prep package. The base then provides the attachment point for your Curt 5th-wheel slider or roller.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on this 2016 Ram 3500, we're going to show you the adapter rails for the Curt 5th Wheel Hitch with slider options for your Ram towing prep package. We're also going to to show you how it installs. This is going to be part number C16022. The Curt 5th wheel adapter is specifically designed for your Ram 3500's under bed tow prep package. It can be easily installed and removed and you can use both your regular 5th wheel hitches, as well as your slider hitches. When it comes to your slider hitches, we recommend you use those for 6 and a half foot beds which will help compensate for the reduced turning clearance.
They're installed and removed by opening up these latches here and are locked into place using these snap pins. Once they're open like that, they're ready to be lifted up. They're closed just as easily. This has a weight capacity of 24,000 pounds. Once its installed, it's going to stand about 3/4 inches tall in your truck bed. Now that we've going over some of the features, lets show you how this installs.
As we've stated before, this is for the Ram tow prepping package. We're going to go ahead and start by opening up all of our ports here to set our adapter in. You just twist on them and life up. You'll do this for all 4 points. Once you have all those removed, we'll go ahead and set these inside the vehicle and we'll go ahead and set our adapter in place.
Before we set our adapter into the rails, we've got to actually open up the feed so they can be set inside. To do that, we'll have to remove this snap pin here and open up like so. We'll be doing this on all of them. I also like to point out the entry points actually have different sizes so the wider ones get put in the back while the slimmer ones get put towards the front. With an extra set of hands we'll go ahead and set this inside the truck bed system. Slip it up, line them up, set them in place and then we'll go ahead and lock them down.
If these aren't fitting in exactly how you need them to, the feet themselves can be adjusted. What you do is you pull the cotter pin here, you loosen it a quarter turn until these can actually shut all the way and lock into place. Once they can shut and lock into place, you reinstall the cotter. Now we're ready for our 5th wheel hitch. Now that we have our 5th wheel hitch in place, we'll go ahead and secure it with our provided half inch pins with our adapter. You can also us e the pins that come with your actual 5th wheel hitch as well. It's your choice. That'll do it for the adapter rails for the Curt 5th Wheel Hitch with slider, Ram towing prep package addition, part number C16022 on our 2016 Ram 3500.
Average Customer Rating: 4.6 out of 5 stars (173 Customer Reviews)
This adapter is specially designed to attach to the receivers in your Ram's factory, underbed 5th-wheel towing prep package. The base then provides the attachment point for your Curt 5th-wheel slider or roller.The pins to secure the upper part of the hitch to the adapter rails, were very difficult to attach the cotter pins. Wasn't enough clearance to get under the bed adapter. Had to detach the adapter from the truck bed and lift one end at a time to be able to insert the cotter pins.
UPS lost the adapter rail. I had to cancel a camping trip. Mike B.,customer service rep at etrailer was very responsive and contacted UPS to have the matter investigated. After a few days the part was never located. etrailer sent another one. The entire 5th wheel package is very well built and fit the truck perfectly. No issues
This piece never came. The stuff (head) that did come was handled horribly by the shipper and came repackaged in about four rolls of packing tape and random cardboard components. It looked like a fort a six year old might make. Neither issue should be a reflection on etrailer (except indirectly in the choice of shippers).
Easiest item I have ever installed on my truck. 4 bolts to set it up then dropped the entire assembly into the Ramming bed puck system. Plan to haul our 5th wheel rv with this. The slider will help if we get into tight area at the rv park. Simly to use. Love it
Curt A20 5th Wheel Hitch Fifth Wheel Hitch 2018 Ram 2500 This was not easy choice to make as I tend to try top save money. But with my truck and the puck system this has been an excellent purchase. The removable pin let's me pull the top of the hitch off while leaving the rest in the truck. This allows me to store it in front of the adapter rails. Then my roll up bed cover clears the top while the rest is still mounted. Dry, secure out of site out of mind while shopping or parked at RV park overnight. The slider allows the extra clearance to give you peace of mind you will not damage your truck while backing into tight spaces on a serious angle. Then of course the top comes off with that pin making the entire thing lighter to remove when taking the entire assembly out of the truck. IT is manageable but still better to use the tractor bucket or hoist as it is heavy duty. No issues and very happy with this purchase and the continued great service from etrailer! I pulled a 34 ft 5th wheel 1800 miles at average of 75mph. Did not even know the trailer was back there when the wind was not blowing. Thanks again for helping me put this package together and having the lowest price while doing it!
I love the way it sits and fits in my truck. The instructions and installation were very clear and easy to follow and assemble. And there is still room to have my tool box’s and a chain between the 5th wheel and my tailgate. My tank cover fits perfectly over the top and my support bars don’t touch the 5th wheel either.
I am very happy with this 5th wheel.It works just like all the descriptions said it would. It will make pulling our camper a breeze.
I would recommend this hitch very highly. And will be recommending all my friends to this company for all future hitches.
I bought a 5th Wheel camper on May 13th. On the 14 I started shopping for a 5th Wheel Hitch. I landed on etrailer’s site. I found what I wanted in no time. When I went to check out it said I should have the unit it 3 days. Which would be Friday. I needed to pick up my Camper on Monday. I called because I wanted to be sure it would deliver on Friday. They assured me I would have it Friday. I placed my order at 11am and by 3 pm I had an email saying the Hitch had shipped. To my surprise it arrived on Thursday. I’m very mechanically inclined and it took me about 2 hours to put the Hitch in my 2017 Ram 2500 with the in bed puck system. I did have to remove my bed liner which I will put back in at a later date. The installation went pretty smooth. I found it helpful to watch the videos on the installation. I picked up my camper on Monday and drove 100 miles home. So far so good. It’s going on 600 mile journey over the Memorial Day Weekend. I was very impressed with the customer service when I called and the very quick free shipping. Great Job etrailer.
Great products, excellent price, speedy (3 day) delivery and easy step by step installation instructions for my sliding fifth wheel hitch for my 2016 Ram 2500 short bed truck w/ factory tow prep package. I would highly recommend any of these products as well as the excellent customer service at etrailer.com
The product arrived 1 day earlier than promised. The instructions were decent, they could of been more inclusive of the different setups, the hitch and sliders didn’t reference how to interface with the Ram puck base. The rubber gaskets for the slider base didn’t fit with the Ram base due to their thickness. You need a 100lbs torque wrench(I rented one from Orielys). All the parts were present. The bad may not of been etrailers fault, but the boxes arrived like they were dropped out of an airplane. Amazingly, nothing was damaged.
Purchased and installed adapter rails for my Curt 5th wheel hitch. These adapter rails are rated for 24,000 lbs., and are "beefy". I could not be more pleased with the ease of installation and overall heavy duty construction of these adapter rails.
Easy install, did most myself but I needed my wife’s help with the plate mount. Took about an hour for install. Everything arrived in good condition, and all the hardware was accounted for.
Exactly what I ordered and works perfect! Here is the A16 Curt attached in the photos. Easy and quick installation into the RAM puck system.
Product went on easily and looks great! Didn't even need to use the instructions really. Only complaint I had is with the shipping. It looks like the box was tossed from the truck of the shipper and between all the shipping hubs the box got trashed because of the heaviness of the product. I'd suggest a better means of securing the product in a heavier duty box as any shipping company won't Handle with care. Overall very satisfied!
Looks great, Easy installation, Good quality.
I had a problem with ups losing one part and etrailer sent out another one. All the staff that I spoke with was great.
This slider solves all the problems with towing a fifth wheel with short bed pickups.
Not a very nice way to receive a $[XX] order plus the Hardware Kit is not here.
Brooke M.
9/18/2023
Oh no! We definitely want to make sure you get the complete product. I will have our customer service team reach out to you.
Straightforward setup. I’d recommend deep sockets for torquing the bolts down. Solid piece of equipment.
Kevin
9/3/2021
One year later… still going strong. This thing will last the long haul!
Great customer service and quick shipping. Showed up 5 days Early.
Like most customers the box was in really bad shape when it arrived. Everything was still together and not damaged. Received 2 of 3 boxes, contacted customer service since I needed the rail system for the rest of the assembly to mount on and they promised the rails would arrive the next day. I'm trusting they will get here. The Curt fifth wheel slider hitch is built substantially well and is impressive, cannot wait to hook up!
Dennis
8/19/2021
Excellent, using to pull a 18,000 lb. Fifth wheel. Works flawlessly!
The adapter rails fit the RAM factory puck system perfectly. 2020 2500 tradesman crew cab 4x4
With fifth wheel prep package.
David
1/26/2023
Rails have been in use for about 2 years now and still do the job great. Finish has held up very well considering they spend most of the time out in the elements. Thats saying a lot with Michigan weather. To date, have pulled over 6000 miles with this setup. 11000 lb 35 ft Outback fifth wheel and 2020 ram 2500 tradesman 4x4 crew cab with 6.4
Great company, shipper lost part and they made it right ASAP
Frederic
12/13/2023
Hitch has performed flawlessly
Ease of assembling and worked with our hitch.
Receiving: Packaging was shot, shredded and falling apart. Parts we're falling out everywhere. Surprisingly all the parts were there.
Installation: Some manhandling was involved, other than that, everything went smoothly for the most part. Also the instructions weren't very clear. Hahaha, like men read instructions! No, but really, the instructions suck. I'm happy with the product.
This mount is a perfect fit for the Ram factory installed "puck" system 5th wheel hitch in-bed mount. It drops right into the factory in-bed holes and locks in with a 1/4 turn of the handles. I coupled this with the Curt Q20 sliding hitch for the short-bed Ram truck, fits and works perfectly. etrailer's pricing was a welcome significant-amount less expensive than other online vendors' sites I researched for the exact same item. The entire assembly with the hitch is heavy, as expected, around 200+lbs. I installed a light-duty (220lb single line/440lb double line) overhead electric hoist in the garage with a kingpin attachment for lifting this out when an empty bed is needed for hauling something other than the RV.
The product itself is great. The reason for the 3-star rating is that the first shipment came in beat up boxes and without all of the parts (and some of the parts were already put together - can anyone say used?). The Customer Service rep was great and escalated when asked. The manufacturer quickly sent new parts, however, they use UPS who beat the boxes up so badly that the post office returned them before they even got to us. This caused us to miss the pick up date for our camper. After I called again, they sent a new shipment, however, it also didn’t make the rescheduled time for us to pick up our camper so we had to borrow someone’s truck to pick it up. Once the parts finally showed up, the shopping boxes were again beat up and all of the parts were clanking together. Thankfully the parts we needed were usable. etrailer needs to work with the manufacturer on securing the boxes better and should find someone other than UPS to deliver them.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mac
12/22/2017
1 year and this hitch is still awesome