Replacement Shank for Curt Adjustable Ball Mount
(3 reviews)
Price: $101.39
In Stock
Replacement Shank for Curt Adjustable Ball Mount
Item # C45059
Retail:$158.21
Our Price: $101.39
You Save: $56.82
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (3)
- Q & A (0)
- Videos (2)
- Photos
CURT Accessories and Parts - C45059
- Drop Hitch
- Trailer Hitch Ball Mount
- Shanks
- CURT
Replaces the adjustable shank for your Curt adjustable tri-ball mount (D900) or Curt adjustable clevis and pintle hook combo (C45008).
Features:
- Replaces the adjustable shank for your Curt adjustable tri-ball mount (D900) or Curt adjustable clevis and pintle hook combo (C45008)
- Black carbine powder coated steel resists rust and corrosion
- Can be used in either rise or drop position
- Quantity: 1 replacement shank
45059 Replacement Shank for Curt Adjustable Ball Mount
Video of Replacement Shank for Curt Adjustable Ball Mount
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Curt Adjustable Ball Mount Replacement Shank Review
Today, we're gonna be taking a look at the replacement shank for your Curt adjustable pintle and clevis hook ball mount. So this is gonna be essential for this specific setup. So if you're grabbing this, you wanna grab the shank as well. The shank can be for your two inch hitch receiver, made of steel, and it's gonna have a nice powder-coated finish. One thing you're gonna have to buy is a pin and clip. It has a diameter of 5/8 of an inch.
And one thing that I recommend getting is this anti-rattle. The nice thing about this is we're not gonna hear any of the rattling and stuff. So now it's one with our hitch receiver, so it's gonna be a little bit smoother of a ride. I just like doing that. I'd mow a lot, and whenever I had the windows rolled down, hearing all of that movement is just kind of excessive.
We're gonna have a little bit of movement right here, but it just limits it to just this making noise, instead of the whole system. It's just gonna prolong the life of the shank and our ball mount. This is what comes in the box. We're gonna have six different holes down here, and let's go ahead and take some measurements. So from the center of the hitch pin hole to where these holes start, about 8 inches or so, and then all the way to the end, it's about 9 1/4 inches.
When it comes to this, we can either have it in this position or we can have a rise. So with this, we're gonna have two different accessories we can put on there. We can grab this one for your clevis, pintle hook and two different sized balls, but there's also another accessory as well. So depending on what kind of trailers you plan on hauling, you can grab one of those two. And with this, all these holes are gonna be about an inch and 1/4 from center to center.
And with this, if we put it all the way down, it's gonna give us a max drop of about five inches. And then if we flip it back up, it's gonna give us a max rise of six inches. And of course we can deviate between those two maxes and get the trailer nice and level. All in all, it's a pretty simple thing. It just really gives you the opportunity to have a lot of adjustments and have two different attachments to fit with a lot of different trailers. So I really like that, I like to be prepared for everything 'cause I never know what I'm hauling. And with this, we're gonna have all the adjustments we need to get it nice and level, even if the tow vehicle changes. So I like that a lot. It's gonna be a great choice for you. And again, this was the Curt replacement shank for your pintle hook, clevis, and your adjustable ball mount..
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Replacement Shank for Curt Adjustable Ball Mount - C45059
Average Customer Rating: 5.0 out of 5 stars (3 Customer Reviews)
Replaces the adjustable shank for your Curt adjustable tri-ball mount (D900) or Curt adjustable clevis and pintle hook combo (C45008).by: Paul 03/29/2023
Good products at a good price
by: Henry 08/27/2021
Frankly, Etrailer was my 3rd choice supplier. But I wasted time with two other suppliers who could not deliver. Etrailer delivered at a solid price and with record-time shipping. Thank you!
by: William06/01/2018
Works well. Better then I have seen others using
3
3
See what our Experts say about this CURT Accessories and Parts
- Will Curt Shank Work as Replacement for Shank of Buyers Products Ball MountThe shank of the Buyers Products Adjustable Tri-Ball Hitch # 3371802225 and the Replacement Shank for Curt Adjustable Ball Mount # C45059 use the same 5/8" diameter holes and have the same 1-1/4" inch hole spacing so you can use the Curt shank as a replacement if you like. I have added a link below to a video review for you to check out as well of the Replacement Shank for Curt Adjustable Ball Mount # C45059.
view full answer... - Parts Needed to Use 2-5/16" Hitch Ball with Curt C45059 Adjustable ShankI have a solution for you, but the Curt # C45059 has a slightly different hole orientation than a typical weight distribution shank. For this reason, you would only be able to use the parts designed to work with this Curt shank-you will need to use the Curt Multi-Ball Adjustable Ball Mount # C45802 and Replacement Tri-Ball for CURT Adjustable Ball Mount # C45800 to give yourself a complete adjustable ball mount. This would be the only available solution for that shank since it was designed...
view full answer... - Curt Adjustable Clevis and Pintle Hook Combo Mounting Hole Dimensions for Shank CompatibilityThe Curt Adjustable Clevis and Pintle Hook Combo with 2" and 2-5/16" Balls - 6,000 lbs # C45008 has mounting holes that are 1-1/4 inches on center just like the standard weight distribution system shank. EZ Lift uses the standard measurements, so you can use the Curt drop shank # C17124 for a deep drop.
view full answer...
- Longest 3-Ball Adjustable Ball Mount For 2" Trailer Hitch ReceviersI may have a replacement option for you, but the Replacement Shank for Curt Adjustable Ball Mount # C45059 is the longest shank available that is confirmed to fit the Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches # D900. Depending on how much extra length you are needing, the Buyers Products Adjustable Tri-Ball Hitch - Solid Shank with Chrome Balls # 3371802225 will be 3/4" longer from the center of the hitch pin hole to the center of the hitch ball. I included videos for...
view full answer... - Dimensions of the Bolt Holes to Mount the Replacement 2 Receiver # C45802The distance between the bolt holes for the Replacement 2" Receiver for Curt Multi-Ball Adjustable Ball Mount # C45802 is 2-5/8" on center. Since that same measurement for the MaxxTow Adjustable-Height Ball Mount MT70067 is 1-1/2" on center (3" for every other bolt hole) they are not compatible with each other. This receiver is actually the replacement for the Curt Multi-Ball Adjustable Ball Mount # D900 so for the shank you will need part # C45059 instead.
view full answer...
- Recommended Replacement Head Assembly For Curt Adjustable Ball Mount ShankTo add a 2-5/16" and 2" hitch ball to a shank like the Curt # C45059 you mentioned you would need the Replacement 2" Receiver for Curt Multi-Ball Adjustable Ball Mount # C45802 and Replacement Tri-Ball for CURT Adjustable Ball Mount # C45800 which gives you a 1-7/8", 2", and 2-5/16" hitch ball. I included a video of the # C45802 for you to take a look at.
view full answer... - Can a Ball Mount Be Used In Place of the Tri-Ball On the Curt Multi-Ball Ball MountI do have an option for you but the Replacement 2" Receiver part # C45802 does not accept a standard ball mount. It only works with the Replacement Tri-Ball part # C45800 which when combined with the Replacement Shank part # C45059 would give you the Curt Multi-Ball Adjustable Ball Mount part # D900. In other words, you cannot use a standard ball mount in place of the tri-ball on the Curt Multi-Ball Ball Mount. If this is not what you are asking please just let me know. If you are looking...
view full answer... - Tongue Weight Capacity of Patriot Hitch Adjustable Drop Hitch ReceiverThe Adjustable Drop Hitch Receiver Adapter - 2" Hitches - 11" Rise/Drop - 7,000 lbs # PH54FR is rated for a tongue weight of 700 lbs max. The Replacement 2" Receiver for Curt Multi-Ball Adjustable Ball Mount # C45802 will work with the Replacement Shank for Curt Adjustable Ball Mount # C45059. You also can take a look at the Gen-Y hitch shanks like # 325-GH-624 for the stackable receivers which are made strong and will work well. This can work as a ball mount, but also can be used as...
view full answer... - Replacement Shank for Weight Distribution System Needing More HeightYour weight distribution system uses a Shank # FA92-02-4100 that gives you a maximum 6-1/4" of rise and 2-1/4" of drop. I recommend using the Fastway Shank # FA92-02-4214. This will give you up to 10" of rise and 7-1/4" of drop with your round bar hitch system.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Video Edited:
Jacob T
Installed by:
Cole B
Installed by:
Adam E
Video by:
Chris R
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Isabelle B
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.