Replacement Pins and Clips for Curt Adjustable Channel Mount Hitches

See what our Experts say about this CURT Accessories and Parts

• Does Curt Adjustable 2-Ball Channel Mount For 2-1/2" Hitch & 10-3/8" Drop Come With Pintle
  Hey Colt, I did a lot of searching and unfortunately the Curt Adjustable 2-Ball Channel Mount for a 2-1/2" Hitch # C45927 does not come with a pintle hook-only attachment, and there isn't a similar option for a 2-1/2" hitch with a rise/drop similar to the 10-3/8" Drop, 8-7/8" Rise this mount has. I know it's not what you wanted but just to be thorough, you can use this mount with Pintle Hook # C45922 and Pins & Clips # C45925.
  view full answer...
• Replacement Adjustment Pins Needed for the Curt Pintle Hook with 2-5/16
  Yes you sure can! The replacement pins that are used to adjust the hitch ball and pintle hook on the Curt # C45910-15-20 are found on our site listed as part # C45925. If you would rather go with a locking pic set I recommend the Curt Lock Set # C23556. This will replace one of those adjustment pins and then also be used to lock the shank of this ball mount to your trailer hitch receiver.
  view full answer...
• Replacement Channel Mount Ball Platform for 20K 3 Inch Wide Adjustable Curt Shank
  The internal channel width of the Replacement Shank for Curt Adjustable 2-Ball Mount # C45917 is 3" while the Replacement Ball Platform # C28KR you're looking at has a 2-3/4" width and is for the Curt Rebellion XD rated only for 15K as opposed to the 20K rating for your shank. Since there will be a 1/4" difference I recommend going with the Curt Pintle Hook # C45922 instead which has the higher rating to match your shank plus it comes with a 2-5/16" hitch ball that can be swapped out for...
  view full answer...
• Replacement Pin For Curt Channel Style Adjustable Ballmount
  We do have the replacement pins and clips for the Curt Channel Style Adjustable Ball Mount, part # C45900. You will need to order part # C45925. This comes with 2 pins and 2 clips that will work for your ball mount.
  view full answer...
• Comparing Pintle Hook and Gooseneck for Towing With 2015 Ram 2500
  A pintle hook combo like the Curt Pintle Hook with 2-5/16" Hitch Ball # C45922 and a gooseneck are very different applications and generally aren't comparable because they require such different applications and configurations for both your trailer and truck. Assuming you have a truck that is set up for both, a gooseneck application will absolutely be the way to go because it will be a more cost-effective option and will give you better ride quality when towing. You didn't state your...
  view full answer...
• Replacement For Platform For Curt Ball Mount C45901
  By shank with the 1" diameter hole I believe you are referring to the ball mount platform of the Curt Channel Style Adjustable Ball Mount # C45901. And while Curt does not offer this separately, we do have an option for you that will work, which is a dual-sided hitch ball that fits the platform; you will also need the pins to mount it: - Replacement 2" and 2-5/16" Dual-Sided Hitch Ball for Curt 2" Adjustable Ball Mount # C45912 - Replacement Pins and Clips # C45925
  view full answer...
• Hitch Ball Compatible with Lock N Roll Adjustable Channel Bracket for 1-1/4 Inch Hitch Receivers
  The Lock N Roll 3-Position Adjustable Channel Bracket for 1-1/4" Hitch Receivers - 2,500 lbs # 336VS507 will use the Lock N Roll Articulating Hitch - Adjustable Channel Mount - Vehicle Side - 11,000 lbs # 336VS503 for your connection to your trailer. If you then want to use the channel bracket for a hitch ball, you can use the Replacement 2" and 2-5/16" Dual-Sided Hitch Ball for Curt 2" Adjustable Ball Mount # C45912. Then you can use the pin and clips # C45925. With this combination...
  view full answer...
• Replacement Pin and Clip Recommendation for Curt Channel Adjustable Ball Mount
  For replacement pins that hold the balls of the # C45900 to the shank of the assembly we have the part # C45925 which comes with 2 pins and 2 clips. We do not have them individually though.
  view full answer...

Do you have a question about this Accessories and Part?