bing tracking image
  1. Accessories and Parts
  2. CURT
  3. Trailer Wiring
  4. Mounting Hardware
  5. Brackets
  6. 4 Flat
  7. 5 Flat
  8. 6 Round
  9. 7 Round
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch

Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch

Item # C58000
lowest price pledge
Retail:$43.27
Our Price: $26.49
You Save: 39%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 1.21 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Attach this electrical bracket to your 2" trailer hitch to make mounting your trailer connectors (sold separately) fast and easy. Use with a 6-pole or 7-pole round connector and a 4-way or 5-way flat connector. No drilling required. 1-833-496-1390 to order CURT accessories and parts part number C58000 or order online at etrailer.com. Free expert support on all CURT products. Guaranteed Lowest Price and Fastest Shipping for Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (112)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

CURT Accessories and Parts - C58000

  • Trailer Wiring
  • Mounting Hardware
  • Brackets
  • 4 Flat
  • 5 Flat
  • 6 Round
  • 7 Round
  • CURT

Attach this electrical bracket to your 2" trailer hitch to make mounting your trailer connectors (sold separately) fast and easy. Use with a 6-pole or 7-pole round connector and a 4-way or 5-way flat connector. No drilling required.


Features:

  • Electrical bracket lets you mount your trailer connectors to your hitch quickly and easily
    • Holds (1) 6-way or 7-way round connector and (1) 4-way or 5-way flat connector
    • Fits 2" x 2" trailer hitch receivers
  • Sturdy steel construction is long-lasting
  • Black powder coat finish resists corrosion
  • Notched design allows for access to pin and clip or hitch lock
  • Fast, simple, no-drill installation
    • Fit bracket over hitch receiver opening and secure around lip with included hardware
  • Dimensions: 10" long x 3-1/4" tall
    • Edge is 1-5/32" at widest point


58000 Curt Easy Mount Combo Electrical Bracket for 2" Trailer Hitches - 4-Flat or 5-Flat and 6-Round or 7-Round Plugs





Video of Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Curt Wiring C58000 Review

Today were going to review part number C58000. This is the Curt Easy Mount Electrical Bracket. Basically this bracket would mount on to a two inch trailer hitch receiver. Right here, it would mount around the collar on the receiver and it will allow you to attach a six or seven-way trailer connector right here. Over here on the very end, you can install a four or five flat way plug in there. This is for use on two inch hitch receivers.

It is easy to install, requires no drilling or clamps. Other nice feature on this bracket has a notch design opening here which will allow access to your pin and clip when you install this onto your hitch. Going to give you an example here, it does come with the stainless steel fasteners and nuts. Whats nice about that is the stainless steel will prevent rust and corrosion. Basically, if you take one of the long carriage bolts, put it through, well attach a nut right here on the bottom.

Then what Im going to show you, got an example here, to see how it will install onto your hitch. This would be like a normal hitch on your car. Has the collar around the opening so, basically, that one bolt you would just put around the collar, push it flush up against there, take your other long carriage bolt, slide it down through, there you go, and then take the nut put it on, tighten it down, tighten both these down and it would hold this bracket very securely onto your hitch opening. And, then as you see here, has the notched access area to where when you put like a pin and clip through your hitch, youll have access to put the clip right onto the pin. Right here youll notice has the four holes and a big large hole.

What youll want to do is if you have a seven-way connector, heres an example here of a seven-way connector. That would just install, line the holes up, take these other stainless steel bolts and nuts, put it through, put the nut on the back, tighten it down and do that to all four and that would hold your six or seven-way connector to your bracket. The very last feature is on the very end here. Youll see this sort of metal and bolts. Its like a clamp opening.

What youll want to do is if you have a four-way or five-way flat like this dangling maybe down from underneath the back of your car. You could just insert this in between that just like that, and then hold it together and then bolt this down and it would actually hold your four or five-way flat also on the bracket. Want to give you a few measurements. Let you know how long this item is. This item would be about ten inches long, and the height is about three and a quarter inches tall. That should do it for the review on part number C58000 the Curt Easy Mount Electrical Bracket.


Customer Reviews

Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch - C58000

Average Customer Rating:  4.6 out of 5 stars   (112 Customer Reviews)

Attach this electrical bracket to your 2" trailer hitch to make mounting your trailer connectors (sold separately) fast and easy. Use with a 6-pole or 7-pole round connector and a 4-way or 5-way flat connector. No drilling required.

by:

This bracket works well, but being at the same elevation as the receiver
opening. No more hitting the welded on RV connector bracket and tearing
up the connector. I cut my old bracket off as you can still see part of
it on my hitch. Painted the exposed metal to prevent rust.

A couple of suggestions for those installing this bracket. First use an
adjustable wrench and bend the top and bottom edges inward so the
bracket fits tight on your receiver end. Doing this will keep the
strain on the Stainless Steel M8 bolts used as they are too small to
bend the bracket edge and will snap off. Second use the appropriate
size metric wrench or socket to turn the nut. The nuts have an insert
to keep them from working off while driving, so no lock washers are used.

Installing the RV 7-way connector is just like installing it in any
other bracket, just locate the appropriate holes for your connector and
insert the screws. If your 7-way connector is plastic do not over
tighten the nuts. Installing the 4 or 5-way connector is even easier to
install.


Comments
It has work great as expected. Did sell vehicle in March
John - 06/16/2019


by:

Rocks, curbs, parking stops...Bend and destroy your last electric brake car-side connector bracket. Finally there's a solution for those of us with plastic bumpers who don't have a lifted 4x4 or stock through-bumper socket. This bracket safely puts the vehicle side connector at the same height as the receiver itself!

I installed it on a 2002 Toyota Land Cruiser with factor hitch but this could work for my wife's Subaru so I'll probably get her one too. Anyone who needs to install a trailer wiring connector on low vehicles or on vehicles with rubber/plastic bumpers now can have a better solution.

After ruining 3 L-brackets and $30 connectors I was about to build my own but gladly Curt created a solution. Installation of just the bracket was less than 15 minutes. If you have an existing 2" tube-style hitch. Without measuring the installation was universal for 2" receiver hitches. The only issue might be if your receiver hitch and bracket is too close to the hitch crossmember but I believe the bracket was flexible enough to adjust.

In my opinion, the bracket could be 1/8" steel plate in case you accidentally back the trailer into it but time will tell if that becomes an issue. The bracket comes with fastening hardware which presumably is stainless with lock nuts but including thread lock compound might be a good option. I was able to snug up the bolts enough that the bracket no longer flexed. We're having some rainy weather that's preventing me from rewiring the new female socket connector that I also purchased.

On a side note, my original female socket had the 4-pin connector built into it. Instead this time, I ordered the Curt #57674 4-Way to 7-way RV Blade & 4-Way Flat socket. One important not is if you use this option, the Curt Bracket includes a mounting bracket that will separately hold the 4-pin plug. It may be a cleaner install to use the Hopkins integrated 4-way/7-way adapter instead of using Curt's side mount bracket for the bracket in this review.

Overall, this will buy me some time before I have to upgrade my Land Cruiser to steel bumpers. Essentially this $20 product saved me from having to lift the vehicle to deal with the ground clearance issue. Preserving the low center of gravity and street appearance was important. Even with that said, if you do lift your vehicle its just really nice to get this electrical work up out of harm's way.

All in all, kind of a no brainer easy replacement and because there's a gap in the mounting bracket for the female socket, you may not even have to rewire to upgrade. Just slide the wires of the old socket through the gap and reinstall the screws.




by:

Product is good basic design, remains to been seen how quickly bracket bends or distorts when plugging/ unplugging 7 way as thickness and strength is questionable.
It would have been a plus if product info informed buyers that some, including my Stowaway brand anti rattle hitch bracket cannot be used when using this c58000 wire holder. I have installed my anti rattle device upside down but not sure yet if going to work.


Comments
after a year of daily trailer towing I can report that my concerns of the lightweight metal used in build has been a issue with bending so far no splitting of metal just keep bending back, also mounting hardware light duty. would I buy this product again yes but would seek a more secure way of mounting
Michael W - 11/13/2018


by:

Nice black powder coat finish. Solid feel. Doesn't fit.

This Curt easy mount bracket doesn't fit my Curt class 3 trailer hitch #13355. Either the bracket is designed wrong or the chain hooks on the hitch are welded too close to the receiver collar. Can't install the screw and the bracket sticks out oddly at the bottom because of this.

One picture shows the gap of the bracket to the receiver collar and the screw unable to go through the hole, and the other picture has a closeup of the chain hook / bracket interface.




by:

Install was easy but had to adjust bumper slightly to clear bracket.




by:

Material is not thick enough.




by:

If I could give it 4.5 stars I would. Only less than 5 because the metal could be thicker. On the other hand, I could really tighten the screws at the receiver and bend the metal flush with the thicker collar and there is no wiggle. I had previously installed the Hopkins combo 4-flat with 7-round connector and it fit just fine as etrailer said it would. The only negative is Hopkins doesn't provide stainless steel screws for their connector. I also didn't install the harness according to the excellent video for my 2005 Sienna. Instead I ran all the wires inside the van by bringing them up through a grommetted hole already right where the connector belongs and then tucking them behind the trim panels all the way to the front. The door sill pieces come off easily to route wires under them.




by:

This bracket provides a convenient and easy way to mount a 7 way trailer connector without hacking up your vehicle. Easy to install and sturdy.


Comments
So glad I went with this option!! Looks great even after a year of usage.
Robert - 05/31/2021


by:

Did not need to use this item. But I gave it to a friend of mine, and he said it works very well




by:

Thank you for the fast shipping. This makes it vary easy to install a 7 pin adapter plug. Going on a hitch of a 2013 Lincoln mkx


Comments
Working out great have 8x14 trailer with 7 pin bracket works great for plug
Paul - 04/15/2020


by:

This was a little wonky installing it on my tow hitch, but once I got it on there it was nice and solid.




by:

This is a pretty elegant way to mount the 7-pin connector, especially compared to other options.




by:

With the included spacers and some fiddling, it does the job.




by:

Very helpful and enclosed instruction worked out well.




by:

Received the part I ordered,was exactly what I needed.Enclosed is a pic of it installed.Thanks !




by:

( The product was Excellent and was made very well ) the problem was that it wouldn't fit my 2014 Toyota Tacoma pickup receiver. My receiver is a 2" and that is what it said to buy but it would not bolt on there is a flange around the outside of the receiver. The bracket fit around it just fine but the bolt holes were to closes in and the top and bottom flange on the bracket need to be longer and wider. I should have maybe tried the 2.5 I might have had better luck but I did what the information online told me to do.


Comments
The OEM hitches on the Toyota Tacomas has a thicker width than traditional 2 inch hitch receivers. The width of the receiver including the walls is about 2-3/4 inches. The 2-1/2 inch Curt bracket will not work with the Toyota Tacoma either. You can always use a traditional 7 way mounting bracket such as part # 18138
Mounting Bracket for 7-Way
$10.67
for a 7 way plug and part # 18144
Mounting Bracket 4-Pole Flat
$4.87
for the 4 flat.
-- Etrailer Expert Heather A - 07/28/2018


by:

A great & sturdy solution for adding wiring to a truck that was not a tow package. I had a flimsy mount screwed into the bottom square tube on my Curt hitch on my F150-it hung to low & was always getting bent out of shape. The design accommodates lots of screw patterns for the 7-way female plug and it worked great for mine. This makes a slick add-on that is much nicer cosmetically than the low-slung mount I replaced. It is heavy gauge steel and feels much more like a factory install. If you bend this mount you've probably done other damage! Great solution that was a cinch to install. I highly recommend!
Etrailer.com shipped when they said & I got it when promised. Buy your Curt products from them! You can buy other brands from them as well but I'm partial to Curt.




by:

Thank you for your assistance, great products, and instructional videos! On my 2010 VW Touareg I had to A) install the T-one wiring harness, then B) install the Brake Controller 7- and 4-Way Installation Kit (ETBC7) with a C) Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch Item # C58000. Instead of drilling/cutting wires/etc. to get the T-one harness under the vehicle, I zip-tied the 4-pole connector from the ETBC7 to the hitch bracket, and when I need to tow a trailer, I simply drape the T-one 4-pole connector out the tailgate (as I would if I were pulling a 4-pole connected trailer) and connect the two harnesses. Simple install!




by:

Product was exactly what I ordered, however it was not needed right away so I hung onto it in my "spare parts" bin. Sure enough almost a year later I needed to set up a TOAD with my F150 and this bracket, with some minor mods, fit perfect for the coach to toad 6 pin wire harness!! etrailer has most everything for our full time lifestyle!!




by:

I purchased a 2" Class 4 Curt receiver from a local auto parts store and was happy to see that Curt also produced this option as my FORD F-250 came with a factory round and 4-flat combo. It arrived and appeared to be exactly what I expected. I watched the installation video from etrailer.com and was all set to put it on when it arrived. BUT... It didn't install well! When I put the two long bolts in and started tightening, they stripped the metal that the bracket was made of which allowed the bolts to spin freely and NOT tighten! This left the entire bracket VERY loose, bent, and virtually unusable!!! I proceeded to take the bracket and the truck to a local metal fabricator who cut the 2" receiver portion bracket off and welded it directly onto the hitch frame. I still like the design however, the design appears to be flawed! I would give some serious thought before buying this product.




by:

Curt needs some help with this product, good concept, execution not so good. Stainless nyloc nuts on stainless hardware is a NO NO without using anti seize, either provide some in the package or at least mention the need in the installation instruction. The 4 screws provided to mount the connector should be hex head with a flange for safer, non-damaging install, slotted head screws for an application like this went away in the 1950s. Whenever I receive one of the items, the clam shell package is open with all of the pieces floating around in the secondary packaging, hopefully all of the pieces are still there and the bare bracket has not damaged other items in the package.




by:

It's been 4 seasons. No rust or damage. It does bend & give a little when the plug is pushed in or pulled out. I only wish the bracket is a little bit more rigid and a little bit slimmer so that it looks more integrated and open up for a little more room around the receiver for pin locks and such. Otherwise, it does what it's supposed to do. My installation is on a 2014 Odyssey.




by:

Good heavy duty bracket




by:

After trying to figure out how to attach the wiring harness to the Curt 2" receiver on our new Mazda CX5 (bumper is too low for a regular mount), I called the experts at etrailer. The representative quickly told me about the C58000 which was exactly what we needed! Fantastic customer service, great product, easy installation (no drilling) and very nice quality.




by:

Super clean install. I had replaced my factory Acura MDX hitch due to rust with the Drawtite and needed to secure my factory 7-way and 4-way adapters. the Acura factory 7-way slotted right in.



25
112
Show More Reviews

See what our Experts say about this CURT Accessories and Parts





< Previous
123. . .5



Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video by:
Zack K
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-833-496-1390