Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape
(137 reviews)
Price: $11.34
In Stock
Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape
Item # CAM25013
Our Price: $11.34
In Stock
- All Info
- Reviews (137)
- Q & A (0)
- Videos (1)
- Photos
Camco Accessories and Parts - CAM25013
- RV Vents and Fans
- Vent Install Kit
- Camco
This kit has everything you need to replace or install a roof vent, side-mount vent, plumbing stack, or refrigerator vent on an RV with a rubber roof or sidewall. Includes white butyl tape, mounting screws, and instructions.
Features:
- Lets you replace or install a vent on your RV's rubber roof or sidewall
- Works for roof vents, side-mount vents, plumbing stacks, and refrigerator vents
- Includes mounting screws, instructions, and white butyl tape that adheres to rubber surfaces
Specs:
- Tape dimensions: 8' long x 3/4" wide
- Number of screws:
- (24) #8 x 1" Slotted, hex-head screws
- (4) #6 x 1/2" Phillips-head screws
- 1-Year limited warranty
25013 Camco Universal Motor Home Vent Installation Kit - White Butyl Tape for Rubber Roofs or Sidewalls
Video of Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Camco RV Vents and Fans CAM25013 Review
Today we're going to review part number CAM25013. This is the Camco RV vent insulation kit for rubber roofs or sidewalls. This kit has everything you need to replace or install a vent on your RV's rubber roof or sidewall. It is designed to work for roof vents, side mount vents, plumbing stacks and refrigerator vents. It does include all the items shown here. It includes this 8 foot roll of butyl tape, which is 1 inch wide, and as you can see, the butyl tape is like acaulking compound. Basically this type of tape, this white butyl tape will adhere to rubber surfaces. It also comes with the screws pictured here, the 24 number 8 by 1 inch slotted hex screws, and the 4 number 6 by 1/2 inch Phillips screws. This kitdoes come with a one year limited warranty. And that should do it for the review on part number CAM25013, the Camco RV vent insulation kit for rubber roofs or sidewalls.
.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
Customer Reviews
Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape - CAM25013
Average Customer Rating: 4.7 out of 5 stars (137 Customer Reviews)
This kit has everything you need to replace or install a roof vent, side-mount vent, plumbing stack, or refrigerator vent on an RV with a rubber roof or sidewall. Includes white butyl tape, mounting screws, and instructions.by: Chris06/18/2023
I used this to install my new range vent and my shore line door. It worked very well and was enough to do both. The sealing tape is still holding up and the painted screws still are good and white and has not chipped as of yet.
Another good etrailer part
by: Stephen04/26/2022
Good product
Comments
Very good product. Used it in several applications and have not had any problems.
Stephen - 04/28/2023by: Brian 06/27/2023
Would purchase again,
by: Robert 11/05/2022
Very happy with installation kit, This makes installing the vent in my trailer very easy.
by: James07/10/2022
It did the job for my camper vent install but the width was inconsistent. I ended up doing 2 side by side strips along the vent flange to ensure good coverage. In some place the width of this tape was so thin it didn’t cover the entire flange.
by: Arthur07/14/2018
Worked great during installation of topper for our slide out on the camper. No issues noted to date and no leaks from screws being installed. Great product and assistance from Etrailer service.
Comments
Still going strong and no issues. Have made numerous trips camping for as long as 17 days on one trip and still no issues. Great products and expert assistance when needed by etrailer.
Arthur - 07/14/2019by: Ryan05/30/2022
Worked great on my slide out awning install. Just the right amount.
by: Brudgers05/23/2020
The best part of the Maxxair MaxxFan Plus Roof Vent w/ 12V Fan and Thermostat Manual Lift 10 Speed was installing it myself. I had climbed to my van to it's perfect white metal roof. Run an extension cord. Plugged in the [hardware brand] jigsaw. Bzzzzz. Four inches of sliced virgin metal. Four inches of hole across the roof. An existential moment. No going back. No trial run. Only forward. Forward like the Merry Prankster's bus.
Only later did I realize the point of no return had long since past. It past when I drilled the pilot holes before making the crooked ragged jigsaw cuts.
Installation was empowering. It took me out of my comfort zone. Cutting a ragged hole in the roof changed the way I think about cars. And it all worked out. Installation was as straight forward as people say it is. The hardest part was my mental resistance to cutting the roof.
The vent doesn't leak. It moves air. It's quiet and does not draw much power. I love that it is reversible. At night, I set it to exhaust so light seeking moths don't die in the spinning blades. They are blown away instead of sucked in.
For the electrical. I fused both positive and negative off the battery. I ran the power wires through flex automotive conduit. I picked up the fusing, wire and flex conduit from my local Walmart after figuring out what I needed. The hard part of that was determining wire gauge based on the total length of the feeds. The length was longer than I would have guessed when I measured it.
And it all worked the first time I pushed the button. Great product. Great experience.
by: David05/18/2022
Good product at a good price. Easy to install. The box was damaged and the interior shroud was cracked. I was able to trim the damaged section off as it turned out to be excess to the installation process
by: Chris12/11/2017
Worked as advertised. Relatively easy installation and good fit. Seems well built - much better than the fan we replaced! We have a 2005 34' Holiday Rambler RV and our old fan had essentially disintegrated. We just wanted a no nonsense manual fan that could work with or without the roof vent open (didn't need another remote!). Probably not 100% required to get the Butyl Tape kit if you use sealant of another type but highly recommended to ensure a tight seal and avoid leaks in the future.
by: Steve H06/30/2017
I've ordered several times from etrailer.com and always been happy. First, it's good not to feed the [on-line retailer] beast. Second, etrailer.com's website always has good solutions rather than my local trailer supply store which can be expensive on certain things. I found a bearing kit on etrailer.com that is a great value and perfectly matched my old bearings. I got my local brake shop to press the new bearing races into the hubs and I saved over $300 by doing it myself with the help of etrailer.com.
by: Robert03/01/2018
Worked beautifully - pressed right in and conformed to the corrugations on my siding - great seal! I had removed all four vertical corner aluminum moldings on my TT; cleaned the siding; cleaned the molding/repainted. Re-installed with this new putty tape. Trimmed excess putty with Bondo plastic blade and the result was a professional finish. A year later the putty has not shifted or dried out (which was why I replaced in the first place). I dry camp in the hot Southwest a lot - so not having the putty dry out is paramount.
by: Carlos05/18/2016
Good quality and includes screws. Butyl tape arrived fresh and flexible and not dried out and hard as can happen with this product.
Comments
Its butyl tape.... still providing a great seal and does not appear to have hardened
Carlos - 05/18/2017by: William01/13/2018
Used this to hopefully stop and leaks on the awning rail.
Comments
It worked great but have since traded the trailer on something else
William - 01/13/2019They worked fine but since then we traded that trailer in for something else. Thanks for asking Have a Great Day
William - 01/14/2019by: pdj04/20/2017
The vent cover and the bathroom roof vent screen replacements were an exact replacement for my Arctic Fox. The putty tape was great. I couldnt be happier.
by: Robert02/01/2018
Excactly what I needed to replace the old vents in my trailer. The Free shipping is great.. It really makes a difference with whom I bought from. I spoke with a person on the phone before I ordered my products just to make sure it was everything I needed. she was courteous and thorough..It was her who suggested these butyl tape kits.. good job ! I will definitely be buying from etrailer again.
by: Mark09/02/2019
I received the product in a timely manner in great condition. The fan installed exactly how it was described it worked exactly how I hoped etrailer is a great company to do business with they have great customer service, provide you with installation instructions and videos., and very reasonable prices I couldn’t ask for more .
by: Sfitz08/29/2016
Picked up a used camper last October. I knew the old vent lid had duct tape on the hinge, and it gave out last trip. Ordered this one last week, got it today and was able to pull the old fan and drop this one in in around 45 minutes. The old vent was only held on with some butyl tape and dicor it appears.
I did a quick test to see that the fan ran, but I haven't finished up the trim yet. I think I need to trim the skirt that comes with it, but first impressions are that it's a nice upgrade from the old vent.
by: Bob T04/01/2017
Items arrived fast with regular ground shipping. The roof vent was a perfect fit and installed as expectd. The price was awesome; it was half the price as the vent at my local RV dealer. etrailer.com wil be my go to for all my replacement parts.
by: Randy w09/05/2018
This worked well with my fan install on the rubber roof of the 5th wheel. Simple and necessary.
by: Umberto02/16/2018
Still providing a seal to my slide topper bracket after one year, no discoloration noted..
by: Bob06/03/2018
Worked great for the installation of the Mac air fan.
Comments
Still keeping the water out.
Bob - 06/03/2019by: Thomas02/08/2020
This was what needed. I live in a manufactured home I looked all over for this vent not even the builder of my home could help me. Thank you etrailer. You should let manufactured home owners know of your replacement Parts. Thanks Again tom michaels.
by: Jonathan08/21/2022
Easy to apply and easy to peel
by: Thomas05/06/2019
After watching installation video, the job went without a hitch.
25
137
Show More Reviews
See what our Experts say about this Camco Accessories and Parts
- Information Needed to Determine Correct Replacement Trailer Roof Vent LidTypically, you'd have a 14 x 14 vent. In order to provide a replacement vent, I'd need to know all the information you can provide about it. -What does the hinge configuration look like, is it a single continuous hinge or does it have 3 or 4 tabs on it? -Is the closing assembly in the middle of the lid, or along the side? -Is there a manufacturer name or part number on what remains of the lid, or on the vent itself? Unfortunately, I don't have a reference source where I can look up which...
view full answer... - How to Install Optronics LED RV Porch Light RVPLL8CBOptronics LED RV Porch Light RVPLL8CB installs using two mounting screws you provide. The black portion of the light pops off to reveal those mounting holes. These are shown in the linked video. The light uses a 2-wire design; either wire can be ground or hot.
view full answer... - How to Determine Correct Replacement Roof Vent CoverI do not have any information about what specific roof vent cover would have been used on your camper, but I can explain how you can figure it out. The first thing you'll want to do is get a measurement of the outside dimension of the vent that extends through the camper roof. Then, you'll want to closely examine whatever's left of the existing vent cover or the roof vent itself for a manufacturer name or part number. Also, examine the hinge used to connect the cover to the vent. Is it...
view full answer...
- Dimensions Of The Roll Of The Camco RV Vent Installation KitI went down to our warehouse to measure dimensions on the roll of the Camco RV Vent Installation Kit Rubber Roofs or Sidewalls White Butyl Tape Item # CAM25013 is 8 feet long and 1 inch wide. This kit has everything you need to replace or install a roof vent, side-mount vent, plumbing stack, or refrigerator vent on an RV with a rubber roof or sidewall. Includes white butyl tape, mounting screws, and instructions.
view full answer... - What Color Tape is Available for Camco RV Installation Kit?The only color of butyl tape available for the Camco RV Vent Installation Kit # CAM25013 would be white. This kit will work to replace or install a vent on your trailer's rubber roof or sidewall. I've added a link to a video review of this product for you to take a look at.
view full answer... - Recommended Butyl Tape for MaxxAir MaxxFan InstallThere is not a specific size of tape you will need to install a MaxxAir MaxxFan. I recommend using the RV Vent Installation Kit part # CAM25013 which comes with 8' long x 3/4" wide of white butyl tape that should be more than enough for your needs.
view full answer... - Recommended Roof Sealant Tape for RV RoofsFor roof sealant tapes we do carry Camco Putty Tape # CAM25003 and Camco Butyl Tape # CAM25013.
view full answer... - Does Trailer/RV Roof Opening have to be Exactly 14-1/4 Inches Square to Install a Vent AssemblyThe rough opening size to install vent assembly # CAM40480 is 14-1/4 inches square but that doesn't mean it has to be exactly that. If your opening is 14 inches square it would be a tight fit but you may not need any specialty tools to open up the hole more. If might just require a little bit of filing. I also recommend installation kit # CAM25013 to install the vent.
view full answer... - Does the Roof Opening on RV have to be 14-1/4 Inches Square to Fit the Camco Roof VentThe hole in the roof of the RV has to be around 14-1/4 inches square to install the Camco RV Roof Vent, # CAM40480, but it does not need to be exactly this measurement. Since the opening in your RV roof is 14 x 14, then the fit will be tight but you will be able to install the vent. When installing the vent it is recommended to use the Camco RV Vent Installation Kit, # CAM25013. The kit includes screws and sealant tape.
view full answer... - Is Sealant Also Needed if Using Camco RV Vent Installation Kit # CAM25013Camco RV Vent Installation Kit # CAM25013 would not require silicone sealant but if it were me I would use some, # 0160297, just to make sure that there is no leaking possible!
view full answer... - Roof Vent Install Kit for a 2006 Rockwood Rockwood Ultra Lite Series M-2304S with Rubber Coated RoofThe correct kit you need to install a roof vent on your 2006 Rockwood Rockwood Ultra Lite Series M-2304S with a rubber coated roof is part # CAM25013 as you mentioned. The reason for this is because the rubber coating and silicone may not be compatible with one another which could lead to an improper seal or break down of materials. You would need to scrape away the old material with a putty scraper before the butyl tape is used.
view full answer...
- Installation of Roof Vent onto the Roof of an RVIn order to install a roof vent, like # CAM40480, you will need to get on the roof of your RV. You'll need to seal and fasten the vent down to the roof. I've attached an install video showing the process for you. We also carry the install kits, # CAM25013 for rubber roofs or # CAM25003 for metal.
view full answer... - Correct Solera Slider for RV1) The Solera Slider # LCV000184673 does include the awning rail. 2) Yes, the # LCV000184673 is the correct size for you since it will fit an RV that measures from 128 to 133-3/4 inches including the flanges. You want to have a minimum of 2-1/2 inches beyond each side. 3) Two rolls of the Butyl Tape # CAM25013 should be enough. You definitely don't want to run out though.
view full answer... - Size of Brackets For Solera RV Slide Out AwningWithout knowing the exact size of the current brackets I don't know if they will cover them. However the Solera RV Slide-Out Awning # LCV000182037 has mounting brackets that are 7 inches long, and the mounting surface is just over 1 inch before it curves outward for the rod. I attached a photo so you can compare it to the brackets on your 2013 Thor Tuscany. If you are replacing the slide topper you want to measure properly so that you get the best fit you can. You'll want to measure from...
view full answer...
- Recommended Butyl Tape For Installing Slide-Topper AwningThe Solera 14' Slider (Slide-Topper) in White w/ White Hardware # LCV000163301 comes with everything you need for installation except the # CAM25013 which is an 8 foot length that is shown in the video as you stated. I do recommend getting two of these for your installation for a nice seal. The hardware hole pattern of this awning is universal and will match most competitive brands which alleviates the need to patch holes.
view full answer... - Is Silicone and Adhesive Used to Install a Roof Trailer Vent on a Rubber RoofNo, you would not have to use adhesive between the roof and the Fan-Tastic Vent Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" x 14-1/4" Item # FV802250 during installation. In fact it is possible that an adhesive and the silicone may not be compatible with each other and could lead to one or both breaking down. We actually have an installation kit for rubber roofs. It is Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape Item # CAM25013. Instead of silicone it...
view full answer... - Rubber Bumpers for Use on Ramp of Enclosed TrailerWe have heavy-duty rubber bumpers # TLA7001 from TorkLift that are close to your dimension. These are sold as a set of two and include hardware, as shown in the linked video. Butyl tape # CAM25013 can be used for installation to provide a water-tight seal around the mounting holes. We also have strip-type rubber bumpers and round bumpers for enclosed trailers that you can see on the linked page.
view full answer... - Installation of Slide-Topper Awning for Camper Slide OutFor a slide-out awning like the Solera 6' Long Slider (Slide-Topper) in White w/ White Hardware # LCV000163274, you only need enough room to mount a rail if one isn't already present from the manufacturer. Most of the time the manufacturer already has the rail installed that you will use for a slide-topper like this. It only needs a slight drop for water run off purposes. I recommend using the Butyl tape # CAM25013 to ensure you have a good seal between your rail and camper.
view full answer... - Roof Vent Install Kit Recommendation for RV with Fiberglass RoofSince you have a fiberglass roof the RV roof vent install kit you'd want is the part # 344270KITW. The Butyl tape kit you mentioned # CAM25013 is for use with rubber roofs or sidewalls so it would not work for you.
view full answer... - Is Butyl Tape Included with Solera Slide-ToppersThe Solera Slide Toppers we have available, such as the 10.5' # LCV000168105 that you were looking at, do not include butyl tape but it can be added with part # CAM25013. The Slide-Toppers include the awning itself, mounting hardware and brackets, and the awning rail. I have attached a short video demonstration on this product that you can also take a look at.
view full answer... - Should You Predrill Holes When Installing A Solera Slide-Out AwningSince you should be using self-tapping screws you won't want to predrill the holes for your Solera RV Slide-Out Awning # LCV000163300 rail. You'll want the threads of the screws to have enough to grip onto. If you need additional screws and butyl tape to install your awning you can use # CAM25013.
view full answer... - Will Camco RV Replacement Plumbing Vent # CAM40132 Work on 2002 Prowler Lite CamperThe Camco RV Replacement Plumbing Vent, # CAM40132, was designed to fit 1 inch to 2-3/8 inch plumbing pipes. You will want to take a quick measurement of the pipe on your 2002 Prowler Lite Camper to see if this will work for you. When it comes to installation you'll want to start by wiping down the area with rubbing alcohol. Next, apply Putty Tape, like # CAM25003 for metal roofs or sidewalls or # CAM25013 for rubber roofs or sidewalls, to the bottom of the vent or around the pipe and...
view full answer... - Will Camco Replacement Lid for Elixir RV Roof Vents # CAM40156 Fit 1992 Class C Motor HomeThe Camco Replacement Lid for Elixir RV Roof Vents # CAM40156 is a fit for pre-1994 Elixir branded roof vents. This part has a metal track riveted in place with a channel for the lid opening mechanism. Please see the linked photo. I also included a link to all trailer roof vent replacement lids. Given the age of the RV and the original vent it may be time for a new one if you cannot find the correct replacement part among the available items shown. We no longer have the operation arm that...
view full answer...
- Recommended Replacement Roof Vent for Enclosed Cargo TrailerFor your 2006 Cargo Craft trailer, I recommend the Camco RV or Trailer Roof Vent # CAM40480. This vent will replace your current vent and not only provide you with some sunlight into your trailer but also a screen to keep insects out. To install this vent, I recommend the Installation Kit # 344270KITW or the Camco RV Vent Installation Kit # CAM25013. I've attached an installation video to assist.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video by:
Andrew K
Written by:
Rachelle B
Updated by:
Wilson B
Test Fit:
Robert C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.