Replacement Toolbox Handle Latch for DeeZee Specialty Series Underbody Toolbox - Steel

Video Transcript for Review of DeeZee Underbody Toolbox - DZK2702STC

Today we're going to take a look at the replacement tool box handle latch for the Dee Zee Specialty Series underbody toolboxes. This will replace the toolbox handle latch on the Dee Zee Specialty Series underbody toolboxes. It is a locking stainless steel T-handle with the guide plate, provides security for your belongings. Basically what you'll do is flip open the T-handle, take your included two keys, stick it into the lock, and then you just turn it half a turn. And when you do that, that'll release it and then you can see, you can turn your handle to unlock it and then turn it back to lock it.Then once you turn it into place, turn it back half a turn and see that you won't be able to turn it so it is locked into place. And then for storage, just flip the T-handle down so it's nice and flush.Your dimensions on this overall width from one end to the other is right at four and three quarter inches.

Overall height, including the point right down there, the tip, will be right at four and seven eighths inches tall. Distance between the mounting holes, horizontally center to center is right at three and seven eighths inches. Vertical center to center, it's going to be right at three and a quarter inches.And it does include everything laid out here on the table. The toolbox handle latch with the rubber gasket. Rubber gasket is made to go on there when you go to install it, to give you a good seal.

Comes with the two keys and then the four rivets for installing this to your toolbox. But that should do it for the review on the replacement toolbox handle latch for the Dee Zee Specialty Series underbody toolboxes.