Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
Repairs the composite eZ-Latch on your Demco 2-5/16" trailer coupler.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Randy: Hey, guys. Randy here at etrailer.com. Today we're going to be taking a look at the Demco eZ-Latch Coupler. We're going to be going through the repair process. We have kits available whether you have the two inch or the two and 5/16 inch ball. Basically, it gives us a complete replacement so whether you have this bolted on and you don't want to go through the expense of replacing the entire coupler, or maybe it's welded on and it really isn't a feasible option, it's going to give you a great way to completely rebuild this, get it back in perfect operating condition for you.This repair is really pretty straightforward.
We're going to need a 5/32 punch, and now you can see we've got a hammer, then a 5/32 hex bit. We're going to start with our punch. We've got a roll pin in here. Just going to draft that out, and see as we begin to hit it on one side, it's going to come out further here on the other. All right, before I punch out, you can see it allows us to get that section out.
Then we'll roll this over. So, you've got a screw right here. That's where we'll use our 5/32 hex bit. We want to get that backed out. It has Loctite on it, so it might be a little stiff initially.Move that out of the way.
You see, it's spring loaded, so we'll push down there, hold our spring on that bottom side. That'll allow us to reach in and to pull that portion out. That portion out. We've got our spring that's going to come out. Then also the connecting rod.
Basically removed all components of our coupler at that point. Their new component kit is gonna come with every moving part of this coupler, so you can replace the entire thing, or you can use this kit to have on hand if particular pieces give out on you. To rebuild it, we're going to start with our top latch handle and our main pin that goes through the middle. Got our new roll pin here. We're going to slide that in. You'll see it comes right through the middle. When I align that with the hole in our pen, we'll start to drive that in. Maybe an eighth or a quarter inch kind of a gap on each side. We'll just split the difference there.All right, now we're going to take that, place it down on our coupler just like that. Then we can flip it over. We can see inside now, so let's take our spring and get that slid down and over. Got our spring keeper. In our case with this coupler, we're using the -2.0 hole. Then we'll push that all the way down. We want to take our catch block. We'll replace our screw, and that's gonna be what holds everything together for us. As you can see, be right back and ready for use.
Average Customer Rating: 5.0 out of 5 stars (49 Customer Reviews)
Repairs the composite eZ-Latch on your Demco 2-5/16" trailer coupler.Due to slow shipping at no fault to etrailer, Carol was very prompt to send me another one. Great customer service!
I bought this as a spare. In case something happened. I don’t think I’m ever going to need it?
This is the exact replacement for my damaged eZ-Latch. It required some difficulty during the installion as discussed with your technician, but we got it installed eventually.
Alway good results with etrailer
Worked great - love eTrailer because they have parts you can't seem to find anywhere else.
Great timely service
Just as described
I actually ordered this part from my phone in the parking lot of my local trailer dealer after They told me they couldn’t get it until late April. It arrived today in my mailbox 3/27/2022. Thank you etrailer!!
David
3/30/2023
Working perfectly!
Quick shipping acceptable price. Just wish the plastic top piece was available separately. That’s the only piece I needed
Etrailer emailed me that my part wouldn’t arrive for 2 weeks and recommended another part they could ship that day, the part they shipped wouldn’t work on my trailer, they sent me the correct part and refunded my money, great customer service
I only needed the top plastic handle, but this was not available as a separate item so I bought the whole kit. I was what I needed. the video on etrailer was key to purchasing the product as I did not know for sure that I had to drive the existing pin holding the handle out with a hammer and punch. Thanks for the video.
TERRIBLE PACKING
it was what we needed, just wondering if you can purchase just the black platic top, that was all we needed
This is an exact replacement for the one that was broken. It only took about 30 minutes to change out and the trailer is road ready again.
Only place I could find this kit. Shipping was quick and price was reasonable. I will check back whenever I need more trailer parts.
Great customer service. It shipped out as expected, and arrived when expected. What more can you ask in these difficult days. I used the e trailer YouTube video to install and all went well.
does what it's supposed to do
William B.
10/12/2022
worked as described
Perfect fitment, easy to install. This is the place for your trailer needs!
Part came fast, Thank you
Fast shipping, Receive part as described. Hope to do business again.
Part works great
Exactly what I ordered.
Perfect fit. Quality merchandise.
part came when promised, was exactly what we were looking for
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Robert
3/9/2024
Great! Absolutely no problems.