Replaces the base assembly on your Demco Recon gooseneck-to-fifth-wheel trailer hitch adapter (DM8550045). Base allows for 15-1/2" to 18" height adjustment to fit your application. Installs on the ball of your gooseneck hitch.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this Replacement Base Assembly for the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter. This has a 21,000 pound gross towing weight capacity. Now this part will replace just the base assembly that's on the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter, which is part number DM8550045. Now that adapter, we do sell separately on our website. Now this is just for the base assembly.
It does not include the hitch head. The hitch head bolts to this center post here. The hitch head, we do sell separately. It's part number DM6169. The center post right here that the hitch head attaches to, has three different height settings to fit your application.
And the hitch height is critical 'cause when you go to tow your fifth wheel, you do wanna make sure you're towing as level as possible. And hitch height is always measured from the top of the truck bed to the top of the hitch head. And now the hitch height settings on this center post, there's three holes in it. So it gives you a selection of three different hitch height settings. Either a 15-and-a-half inch, 17-and-a-quarter-inch or 18-inch hitch height setting.
You just pick the one that works best for your application. Now, this base also, when you do install this over the gooseneck ball, it does give you a three-inch offset for extra clearance of your fifth wheel. It is is a sturdy steel construction. Has a nice rust-resistant black powder coat finish on it. And it is a quick, simple installation.
Basically, this just installs over the gooseneck ball and it's held in place with the pin and clip. And also these two set screws right up front here. This part is made in the USA and again, the gross towing weight capacity on this base assembly is 21,000 pounds. But that should do it for the review on the Replacement Base Assembly for the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter..
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.