Demco 6-Hole Adjustable Channel Bracket - Weld On - 12" Tall - 21,000 lbs

Video Transcript for Demco Adjustable Trailer Coupler DM66134 Review

Today, we're going to be taking a look at part number DM66134. This is the Demco 6-Hole Adjustable Channel Bracket. This channel bracket is going to offer five different mounting positions for your ball coupler, or lunette ring, or clevis on your trailer. Position 1, 2, 3, 4, and 5. It is a weld-on installation. It's going to have a nice raw steel finish to it, so it's going to require less prep work when you are ready for your installation.

It's made from sturdy half-inch solid steel. It's going to offer a weight capacity of 21,000 pounds. I'm going to flip it down this way. That way, we can go over some basic measurements here. The overall height, that's going to measure about 12 inches. The channel width, inside edge to inside edge, it's going to be about 3 inches wide.

Outside edge to outside edge is almost 4 inches. The whole spacing on this unit, taking the measurement center on center, that's going to be 2 inches, and that's going to be the same for each set. The whole diameter is going to measure 5/8 of an inch, so it is designed to accept 5/8-inch diameter bolts. Again, that overall width is going to apply to the backside too. Again, that measured about 4 inches. Now, I do have a lunette ring here today just to show how it would fit inside our channel bracket.

Once you have it in there, you can adjust it to whatever height you need, and then you need to install your hardware. That's one of the really neat things about the adjustable channel bracket is you can change the height of your ball coupler, your lunette ring, and your clevis to fit your application. That's going to do it for our review of part number DM66134. This is the Demco 6-Hole Adjustable Channel Bracket. .