Derale Stainless Steel Hose Clamps (4 Piece)

See what our Experts say about this Derale Accessories and Parts

• How Long is the Hose in Derale Engine Oil Cooler # D15405 for a 2014 Ram 1500 5.7 Liter
  The Derale oil cooler # D15405 comes with 10 feet of 1/2 inch hose. You could add another 10 feet using # D15700. Then you would just need a 1/2 inch line to 1/2 inch line hose barb fitting from an auto parts store and some additional hose clamps # D13008. For transmission cooler # D13503 there are no special fittings required for installation. But if the included Insta-dapt fitting does not fit your external transmission cooler and the stock lines are metal you would need to cut and flare...
  view full answer...
• Small Transmission Cooler Recommendation for a 2013 Ford Explorer
  The cooler that comes with the part # D15602 can be used as a transmission cooler for your 2013 Ford Explorer. Since you do not need the oil cooler parts that come with it you would be better off ordering the part # D51008, two of the part # D98202, rubber hose # D15799, and hose clamps # D13008.
  view full answer...
• Engine Oil Cooler with Thermostat for a 2006 Toyota Tacoma with V6 Motor
  First you would need an engine oil cooler kit. I recommend # D15502 because it comes with multiple thread types and has the proper O-ring size for a V-6 Toyota motor. The sandwich adapter included is thermostatic so a separate thermostat is not required. Oil that is cooler than 180 degrees will bypass the heat exchanger, so your engine will warm up faster. You may need some extra hose like # D15700 for 10 feet. And for hose clamps use # D13008. I have included a couple of links to oil...
  view full answer...
• What is the Length of the Hose in the Derale 8000 Series Transmission Coolers
  The hose that comes with the # D13502 and # D13503 transmission coolers is 4 ft long. This is the same with all Derale 8000 Series transmission coolers. If you need additional hose length, we offer a 4 ft long individual hose, # D13003, and a 25 ft hose, # D13007. You may also need additional hose clamps, # D13008, if you purchase additional hoses.
  view full answer...
• Remote Transmission Cooler and Mounting Accessories for a 2004 Chevy Suburban 5.3 Liter
  Using the GM-specific snap-in radiator adapter fitting # D13035 will make installing a transmission cooler such as # D12733 easier because with it you would not have to cut and flare any lines for installation. The core on this cooler has 6 AN fittings. This cooler does not come with a thermostat but one can be added using # D13021. You will also need a mounting kit such as # D13002, hose clamps such as # D13008, and hose # D13017. The other option is a remote cooler that comes with these...
  view full answer...
• Will a Stacked Plate Transmission Cooler Fit a 2006 Chevy Avalanche
  You can install transmission cooler # D52506 on your 2006 Chevy Avalanche because coolers are not vehicle specific. If you have the available space under the hood you can install it. The cooler is 13" wide x 9-3/16" tall x 2" deep. It does not come with hose, clamps, or provisions to mount it. To mount it you can use kit # D50020. For clamps use # D13008. And for hose use # D13017. And to avoid cutting and flaring factory lines you can use fitting # D13035.
  view full answer...
  
• How Long is the Hose Included with Derale Transmission Cooler for a 2013 Toyota Tacoma
  The Derale transmission cooler # D13502 comes with 4 feet of hose. This is typically enough for most applications but for your 2013 Toyota Tacoma it will likely not be enough. Additional hose is recommended. For an additional 4 foot length of hose use # D13003. For the proper size clamps use # D13008.
  view full answer...
• Parts Needed to Install Transmission Cooler # D13311 in a 2011 Jeep Liberty
  You would need the AN fitting adapters part # D98200 for each end of the cooler and then the clamps part # D13008 for securing the hose to the line, and for hose part # D13016. Most likely you will also need the insta-dapt fitting part # D13004 as well.
  view full answer...
• Will the Derale Spin-On Remote Oil Filter Adapter Work on a 1964 Ford Interceptor Y block 312 CID
  The Derale Premium Spin-On Adapter Kit - 3/4-16 Engine Filter Threads, item # D35703, is designed to replace the adapter that goes on the engine block filter landing. My reference guide only goes back to 1965 but I am confident that the 3/4-16 threads will work on your 1964 Ford motors. 312 CID translates to 5.1 Liters which is most likely what they now call the 5.0 liter Ford engine. Along with the spin on adapter you will need the Derale 1/2 inch NPT Male x 1/2 inch Barb Straight Hose...
  view full answer...
• How To Reduce Both Engine Oil and Transmission Fluid Temps On A 2005 GMC Sierra 2500 While Towing
  I have attached a list of parts that I recommend for your 2005 GMC Sierra 2500 to help with cooling both the engine oil and transmission fluid while towing. Derale Hyper-Cool Remote Transmission Cooler Kit part # D15960 Derale Hyper-Cool Remote Engine Cooler Kit part # D15660 Derale Snap-In Radiator Adapter Fitting part # D13035 Derale High-Temperature Replacement Hose part # D15799 Derale Stainless Steel Hose Clamps part # D13008 1/2" Barb to 1/2" Barb Union Fitting part (Local Auto...
  view full answer...
• Transmission and Power Steering Cooler Recommendation for a 2005 Honda Odyssey
  Since you are planning on buying a transmission cooler like the Derale Transmission Cooler, part # D13502, I would consider purchasing the Derale Combination Cooler Core, part # D15321. This cooler can be used for cooling both the transmission fluid and the power steering fluid on your vehicle in one compact package, see photo at right. You will need to measure to decide if you will be able to mount the transmission cooler first. The dimensions of the Derale Combination Cooler Core are...
  view full answer...
  
• Recommended Frame Rail Fluid Cooler for 200r4 Transmission on 1946 Chevy Truck
  The Derale 24" Frame Rail Fluid Cooler with -6 AN Inlets # D13225 is a great option. It does not require lines to the front of your truck to cool your transmission. There is not a longer option available, but you can run the Derale 17" Frame Rail Fluid Cooler with - 6 AN Inlets # D13221 as well if increased cooling is desired and you need to be under 45 inches. You may also be interested in the Derale -6 AN Female Swivel x 3/8" Barb Hose Fitting # D98200, Derale High-Temperature Replacement...
  view full answer...
• Derale 40-Row Transmission Cooler For a 1997 Ford F-250 Heavy Duty Pickup
  To use the Derale 40-Row, High-Performance, Stacked-Plate Cooler # D54006 on your 1997 Ford F-250 you will a few parts to attach to your 5/16" transmission line. First you need two if the Derale -6 AN Female Swivel x 3/8" Barb Hose Fittings # D98200 to convert the AN fittings on the cooler. Then you will need some 3/8" Derale High-Temperature Replacement Hose # D13016 which comes in a 5' length. Depending on the placement of your cooler you may need 2 of these. The Derale Stainless Steel...
  view full answer...
• Parts Needed To Install a Derale High-Performance, Stacked-Plate Cooler on a 2015 Chevrolet Tahoe
  I do have an option for you but the part that you referenced, the Bracket Kit for Derale High Performance Stacked-Plate Coolers part # D50020 is just a bracket kit for a stacked-plate cooler like the Derale 25-Row, High-Performance, Stacked-Plate Cooler part # D52506. In order to use the above stacked-plate cooler you will need a few items which I have attached for you below but they will vary based on what size transmission lines your 2015 Chevrolet Tahoe uses. The most common is 3/8"...
  view full answer...
• Larger Hose Fittings for Derale # D13611 on 2010 Mercury Mariner
  On the Derale Series 9000 Plate-Fin Transmission Cooler Kit w/ NPT Inlets - Class I -Extra Efficient # D13611, the fittings that come with the unit are 1/2" NPT x 3/8" hose barb. The other option for fittings are the Derale 1/2" NPT Male x 1/2" Barb Straight Hose Fitting - 2 Piece # D15712 along with the 1/2 inch inner diameter hose # D15700 and hose clamps # D13008. This slightly larger size is the only other option for the 1/2" NPT fitting on your cooler.
  view full answer...
• Can Two 40 Row Derale Transmission Coolers be Used in Place of a Factory Cooler
  Yes! You can use 2 of the Derale 40-row coolers # D54008 to cool the transmission fluid on your prostreet car. The stacked plate design is the most efficient at cooling. To optimize cooling make sure the coolers are mounted where they can get the most air flow (right behind the grille). I also recommend a couple of mount kit # D50020 and some hose. For a 25 foot length with an inner diameter of 11/32" use # D13007. For 25 feet of a 3/8" diameter use # D13017. We also have a 4-pack of stainless...
  view full answer...
• Fittings and Other Parts Needed to Install Transmission Cooler D52508 in a 2010 Chevy Tahoe
  Derale Snap-In Radiator Adapter Fitting # D13035 is recommended when installing a transmission cooler on the 2010 Chevy Tahoe. I have linked a video featuring this fitting for you. In addition to the fitting and the core, # D52508, you will also need a bracket kit # D50020 to mount the cooler, hose clamps, # D13008, and about 10 feet of hose, # D15700. We also have a 25 foot length of hose, # D15799, if you want to err on the side of caution; especially if you are also installing a bypass...
  view full answer...
• Transmission Cooler Recommendation for a 2015 Toyota 4Runner
  Transmission coolers don't have specific fits, but if you have room for the # D52506 in front of your radiator/AC condenser then it would work well. It measures 13" Wide x 9-3/16" tall x 2" deep. This is one of the most efficient coolers on the market that would work great on your vehicle. To install this cooler you will need a few other components. Part # D50020 for a bracket kit, part # D98200 for a fittings (you'll need two of these), hose clamps part # D13008, and rubber hose part # D13017.
  view full answer...
• When Installing a Transmission Cooler Can the Inlet/Outlet Ports Face Down
  Yes, you can install a transmission cooler like the Derale 25-Row Stacked-Plate Cooler part # D52506 so that the inlet and outlet ports are facing down. The inlet and outlet ports do not need to be pointed in any one specific direction as the line pressure will work to pump the fluid though the inlet of the cooler and out the outlet to be returned back to the transmission. In order to install the above you will need the following: Derale -6 AN Female Swivel part # D98200 Derale High-Temperature...
  view full answer...
• How to Determine if Transmission Cooler Will Fit In Front of the Radiator on a 1999 Chevy Silverado
  For transmission coolers you have to go by their dimensions compared to the available space where you want to install it. Stacked plate cooler # D51908 is 13 inches across, 7-7/16 inches tall, and 2 inches deep. If you have more than this much space in front of the radiator then it will fit your 1999 Chevy Silverado. This particular cooler is not a kit so it doesn't come with any hose or mounting components. To mount it you can use # D50020. For hose you can use # D15799 and clamps #...
  view full answer...
• Will the Derale 25-Row Stacked-Plate Cooler Fit a 2005 Chevy Silverado 2500
  The stacked-plate transmission coolers like the Derale 25-Row, High-Performance, Stacked-Plate Cooler with -6 AN Fittings part # D52506 do offer superior cooling power when compared to plate-fin and tube-fin designs. However, they are also much thicker at 2" which means you will need to make sure you have this much depth in addition to the length and height of 13" wide x 9-3/16" tall. There should be plenty of space behind your grille for this cooler so I don't think you will have any issues....
  view full answer...
• Can Derale Remote Dual Oil Filter Mount Kit be Mounted on Vehicle Frame Under Passenger Door
  With enough hose you could mount the remote dual filter kit # D15707 anywhere. You will want to make sure that the filters and hoses so not drop below the frame. Basically anything hanging too low is susceptible to road debris. The safest location would be up under the hood somewhere. Near to the top of the engine compartment would provide ample protection and accessibility. For hose you can use # D15799 which is a 25 foot long piece. We also have hose clamps # D13008 you can use if you...
  view full answer...
• Can I Mount Derale 10-Row Stacked-Plate Cooler to Bumper of 2002 Jeep Liberty
  I spoke with my contact at Derale and he confirmed that the Derale 10-Row, High-Performance, Stacked-Plate Cooler # D51008, which you referenced, is a fit for your 2002 Jeep Liberty and can be mounted to your front bumper. To complete the installation you will want two of the barb hose fittings, part # D98202, replacement rubber hose # D15799, hose clamps # D13008 and insta-dapt radiator adapter # D13004. The mounting kit is # D50020.
  view full answer...
• Transmission Cooler Recommendation for 2007 Dodge Ram with Cummins Diesel
  For a full size diesel truck you'd need all the cooling power you can get if you plan to bypass your factory cooler. Stacked plate coolers are the most efficient styles of coolers around so the part # D54010 would be your best option. To complete the installation you will want two of the barb hose fittings, part # D98202, replacement rubber hose # D15799, hose clamps # D13008 and insta-dapt radiator adapter # D13004. The mounting kit is # D50020.
  view full answer...

Do you have a question about this Accessories and Part?