bing tracking image
  1. Accessories and Parts
  2. Dexter Axle
  3. Trailer Brakes
  4. Electric Drum Brakes
  5. Brake Assembly
  6. 10 x 2-1/4 Inch Drum
Dexter Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs

Dexter Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs

Item # 23-26
lowest price pledge
Our Price: $81.52
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 10 lbs
Quantity: 
In Stock
Dexter Axle Accessories and Parts - 23-26
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
10" x 2-1/4" Driver's-side electric trailer brake assembly fits 3,500-lb axles. Mounting flange has a 4-bolt pattern. Fits 13" to 15" wheels. 1-800-940-8924 to order Dexter Axle accessories and parts part number 23-26 or order online at etrailer.com. Free expert support on all Dexter Axle products. Guaranteed Lowest Price and Fastest Shipping for Dexter Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (259)
  • Q & A (0)
  • Photos
  • Why etrailer?

Dexter Axle Accessories and Parts - 23-26

  • Trailer Brakes
  • Electric Drum Brakes
  • Brake Assembly
  • Dexter Axle
  • 10 x 2-1/4 Inch Drum
  • LH
  • Manual Adjust
  • 3500 lbs

10" x 2-1/4" Driver's-side electric trailer brake assembly fits 3,500-lb axles. Mounting flange has a 4-bolt pattern. Fits 13" to 15" wheels.


Features:

  • Electric brakes are easier to install and offer more user control than hydraulic brakes
    • Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary
  • Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes
  • Mounting bolts and hardware included
  • Made in the USA


Specs:

  • Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO
  • Configuration: left hand (driver's side)
  • Dimensions: 10" diameter x 2-1/4" wide
  • Mounting flange bolt pattern: 4 bolt
    • Distance between bolt holes: 2-7/8" apart on center
  • Wheel size: 13", 14", and 15"
  • Axle rating: 3,500 lbs
  • Limited 5-year warranty


Exploded Electric Brake Assembly

K23-026-00 10" x 2 1/4" LH Electric Brake Assembly - Drivers Side - 3.5K Axles

Replaces 23-26






Customer Reviews

Dexter Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs - 23-26

Average Customer Rating:  4.8 out of 5 stars   (259 Customer Reviews)

10" x 2-1/4" Driver's-side electric trailer brake assembly fits 3,500-lb axles. Mounting flange has a 4-bolt pattern. Fits 13" to 15" wheels.

by:

Good solid brake shoes, fit on perfectly, in fact the first problem free repair job I have tackled in months. The camper is as unusual as the photo is of Alabama weather.


Comments
I have only put about 3,000 miles on it since then, if it brakes before I but 25,000 miles on it I would be unhappy with it. For this, a year is simply not enough
James - 10/11/2021

by:

Perfect replacement if you are experiencing fatigue failures on your brake hardware. Easy installation. 7000 miles since installing and no issues.



by:

Ordered the parts by phone. Melissa was highly knowledgeable and extremely professional. Would recommend eTrailer to anyone that needs trailer parts or trailer hitches.



by:

Etrailer is a great company to deal with. Great helpful videos. Parts ship fast and free. These brake assemblies are fast and easy to install



by:

Complete and easy to install



by:

Excellent service, fast shipping, good prices and quality products (Dexter).
Really happy with etrailer.



by:

E-trailer is a great company to deal with. The electric brake assemblies were exactly the same are the original which insured installation was smooth and easy. Support after the sale is unsurpassed. They follow-up after the sale with instructional video clips to insure there are no "hiccups". After installation of the new brakes, I road tested and calibrated the controller (a device that I previously purchased from E-trailer). E-trailer was referred to me by a friend. I will definitely use them again and will not hesitate to refer them to others. Lastly the assemblies are American made and the shipping was free, could not improve on service, product or value. Thanks



by:

very happy with service and product



by:

great prices & service



by:

Added brakes to my 6X10 Wells Cargo enclosed trailer. They are working great. Easy install. As always, new trailer brakes take some time to wear in before you get full "lock - up" level braking. I'd buy these again. As always, great order and order fulfillment experience with etrailer.



by:

It is always a pleasure ordering from etrailer. Never have any problems with my orders. They have quality products, and tons of information and videos "by people who know what they are talking about" on their website. Great company to do business with.



by:

Installed a complete new axle from dexter the left side brake failed after less then 4,000 miles. I don’t have the time to deal with dexter so l ordered this 10” brake assembly from you. I installed the new assembly it’s working at the moment. I would not recommend this dexter brake assembly to anyone l just didn’t want to replace both brakes at this time as the right side only has a few thousand miles on it. If I have to repair the brakes in the future i’ll Go to a different style.



by:

The construction of the brake assembly makes it simple to install. Also the product info video describes the specifications.



by:

Excellent fit and finish, as usual from Dexter. Installed on a Lippert 3500# axle with no problems.



by:

I installed these brakes as part of an upgrade and rebuild of a 20 year old trailer and so far they are working great!



by:

The parts I ordered were perfect fit and easy to install They made my trailer safe and functional again



by:

brakes worked fine last summer, complete assemblies were a better deal than just replacing the shoes. my son in law and myself just combined an order this weekend (save shipping cost) on trailer tow mirrors from etrailer for our vehicles.


Comments
just came back from OBX 1400 miles-trailer brakes worked perfect.
glenn b - 04/17/2017


by:

I bought these to add brakes to my utility trailer. erailer customer service was excellent.
They were able to price match a competitors price and the shipping was fast.
The brakes fit well and the install was easy.
Why only 4 stars then? Its a small thing but the brakes came with 4 nuts for the install but did not included the required lock washers. No problem I thought, so off to the local box store to get 7/16 washers. This proved futile, and It took me quite a while to finely locate the correct washers.



by:

I ordered these electric brake assemblies on a Tuesday and they arrived at my home on Thursday!! It was pretty amazing. Now I can get started replacing the brakes on my trailer earlier than I hoped!! Thank you so much for fast action. I will definitely be turning to etrailer.com for all my work trailer and camper parts from now on!!



by:

I removed and reconditioned the axles on my snowmobile trailer. Salt corrosion damaged the brake assemblies. The replacements assemblies from etrailer.com bolted right on and made short work of the brake repair.


Comments
Still working just fine.
Jeff K - 12/22/2017


by:

Good quality product, zero issues after one year. Works as intended.



by:

I bought a new car trailer with brakes on only 1 axle. etrailer had the exact same brakes for me to put on the second axle. These drum brakes were really easy to install, wire and adjust / re-adjust. I'd really recommend brakes on both axles if like me you're towing close to 7000lb. I've made a couple emergency stops around town, and didn't have the feeling i was being pushed by the trailer at all.
I'd also really recommend getting a high tech brake controller if you're buying one. I had a cheap one that really sucked, i had to constantly readjust brake power every time my speed varied (to stop being pushed by the trailer at speed or jerking to a stop at low speed). Annoying and dangerous IMO.



by:

Needed brakes on the second axel of utility trailer and this worked perfectly. Easy install.



by:

First off, Etrailer is awesome. I ordered two pairs of loaded plates and hubs on Sunday night and they were on my door step by Wednesday!..
Three issues with the plates.
1. On one plate, the two wires from the magnet were about cut in two on the back side of the plate right as they come out of the plastic retainer. Must be getting pinched somehow in shipping.
2. Both left plates had lubriplate grease where the brake pads rub the backing plate and at all pivot points. Neither of the right side ones did, requiring disassembly of the new plates to grease the spots that should have been. (Somebody had a bad day on the assembly line!).
3. Product information led me to believe that new backing plate nuts would be included. They were not, but new lug nuts were included with the wheel bearing kits.

Only thing that I would suggest to Etrailer would be to carry replacement lock tabs for the bearings. Other than that, a couple of hours and brand new brakes & hubs all around. They are working great!
Thanks Etrailer for the great products, prices & shipping!

Steve



by:

Great service and fast shipping. The installation is not technically complex but takes some effort and time, especially on an old trailer. The installation videos provided by etrailer were very helpful. Don't forget the BP10-220 Adjuster Plugs and W80630 Brake Adjustment Spoon. You can find the nuts, washers, and waterproof electrical butt connectors at your local hardware store if needed. Also make sure you have what you need to regrease the bearings as you do the install.


25
259
Show More Reviews

Ask the Experts about this Dexter Axle Accessories and Parts



  • Which Left Hand Brake Replaces A 10 Inch 3,500 Pound Dexter Brake Assembly?
    If you only need a left hand brake, we definitely have what you need. The Dexter Electric Trailer Brake Assembly # 23-26 will be just the left side (driver side) brake that will come with the # 23-26-27 Dexter 10 inch 3,500 pound brake kit. This will also include the mounting hardware so no other parts will be needed.
    view full answer...
  • How to Pick Out Brake Assemblies for Terry Resort Fleetwood 5th Wheel Trailer
    Picking out brake assemblies for trailer axles is actually pretty easy but I am not able to determine the info I need from your trailer info since it's not something manufacturers keep records of. You do need to order a total quantity of 4 assemblies since To pick out the correct brake assemblies for your trailer you need to know a few things. You will want to measure the inner diameter of your hub/drums and the depth of the drums to determine what brake assembly dimensions you need....
    view full answer...
    Image 1 for
  • Replacement Dexter Electric Trailer Brakes For 3,500 lb Axle
    Thanks so much for that info and we do indeed have the left hand Dexter electric brake you need for your 3,500 lb axle; I'll also list out the right hand just in case. Based on the info you provided, the correct parts are the following: - Left Hand: Dexter Electric Trailer Brake Assembly - 10" - 3,500 lbs # 23-26 - Right Hand: Dexter Electric Trailer Brake Assembly - 10" - 3,500 lbs # 23-27 - Complete Kit: Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500...
    view full answer...
  • Troubleshooting Brake Actuating Arm Breaking on a Trailer Brake Assembly
    First thing I would do is pull off the hub and inspect the inside surface where the brake magnet rides. If it isn't completely smooth it could be grabbing the magnet and breaking it. Most likely you would have needed to replace the hub after the first time the magnet broke. Are you sure you are using the correct orientated assembly? Brake assemblies are sold in right hand and left hand versions. The actuating arm of the assembly should be pointing towards the front of the trailer. In...
    view full answer...
    Image 1 for
  • Are the Dexter Electric Brake Assemblies Sold Pre-Assembled
    The inner hub plates/brake assemblies we sell are sold assembled as you see them in the pictures. Yes, we do carry them in size 12-1/4 x 3-3/8 inch. Since I do not know what weight axles you have I can not give you a specific recommendation, but I have a link below to all the different electric brake assemblies in the 12-1/4 x 3-3/8 inch measurement. Most likely you have a 9,000lb axle and will need the 23-434 (left) and 23-435 (right) 9,000 lb capacity, check your axle capacity to be...
    view full answer...
  • Incorrectly Installed Brake Assemblies on Dual Axle Camper
    If one set of brake assemblies is on the wrong side of the axle, it will lead to diminished braking performance and premature brake wear. Is it possible that the axle was removed at one time and reinstalled incorrectly? If you look at the photo I provided, you can see how the components of the brake assembly should be situated. The magnet should be at the bottom of the assembly, and the actuating arm for the brake shoes should be at the front (closest to front of trailer) of the brake...
    view full answer...
    Image 1 for
  • Poor Braking on New 2013 Palomino Columbus 340RK Travel Trailer
    First, disconnect the trailer from the truck. Then get a separate 12 volt battery and apply power directly to the brake output wire on the trailer side. The brakes should lock up. If they do not then at least we know the issue is on the trailer. If the brakes are properly adjusted (there should be a slight but constant drag of the pad on the drum when the wheel turns) then check the inside of the hub and the brake pads for any grease that may have somehow gotten in the drum or pads. If...
    view full answer...
  • Using Trailer Brake Assembly on Opposite Side of Trailer
    The brake assemblies are specific to the correct side of the trailer, a right hand brake assembly could not be used on the left side of the trailer. The assembly should be mounted so the magnet is at the bottom and the larger of the two brake pads is pointing to the rear of the trailer. I've heard of folks mounting the assembly upside down on the opposite side of the trailer, but the brake assembly will never work correctly if installed that way.
    view full answer...
  • Trailer Breakaway System Wiring Diagram Availability
    It sounds like you are looking for how to wire up your trailer breakaway system to your trailer so that the brake controller in your truck will activate them. The easiest thing for me to have you do is check out the picture I attached that shows how the systems need to get wired up. I also attached a help article on breakaway systems for you to check out as well. In case you have a brake magnet problem I attached a help article on how to troubleshoot them as well.
    view full answer...
    Image 1 for
  • Troubleshooting Trailer Brakes that Lock Up When Trailer Is Connected after Rewire
    It sounds like in the rewiring of your trailer you ended up shorting out the 12 volt circuit and the brake output circuit. Check the connections you made and for any exposed wiring and fix as necessary. I attached a chart for how 7-ways are typically wired for you to check out as well.
    view full answer...
    Image 1 for
  • Troubleshooting Trailer Brakes that Surge at Slow Speeds with a Tekonsha Brake Controller
    Since you said you have a Tekonsha brake controller that would indicate that you have a proportional brake controller. I would verify that you have it set up properly and that the controller is leveled properly and pointing the right direction. The Tekonsha controllers all have different level ranges that they can function on, but basically you want to make sure the controller is totally parallel with the direction of travel, is level from side to side and as close to level from front...
    view full answer...
  • Testing Brake Magnets to Determine if They Need to be Replaced
    It sounds like your magnets are in need of being replaced. Since the normal spec for 10 and 12 inch brake magnets is 3.2-4.0 Max amps at 12-13 volts and 7 inch magnets is 3.0-3.2 max amps at 12-13 volts and yours is coming in much lower than that it would indicate that the leads are bad and the magnets should be replaced. I attached the FAQ article on how to test brake magnets as well as a page that has all of the brake magnets we offer for you to check out.
    view full answer...
  • Troubleshooting Weak Trailer Brakes that are Adjusted Properly with New Assemblies
    It sounds to me like one of two problems. The first would be that your ground is indeed not strong enough to allow enough amperage to be applied to the trailer brake magnets. In this case I would make sure that the ground wire attached to the trailer at the trailer tongue is secured to a suitable clean surface. It could be that the main ground wire of your trailer is no longer making solid contact from corrosion or it has come loose in some way. Check out the help article I attached. I...
    view full answer...
  • Can I Have Hydraulic Brakes On One Axle And Electric Brakes On The Other Axle On Tandem Trailer
    It would not be a great idea to mix the style brakes on your trailer. You want the brake system to work in sync for both axles. You have a couple of options for your trailer. Since you said your new trailer came with hydraulic brakes on the front, I would recommend installing hydraulic brakes on the rear axle as well. You would need the hubs, brakes, and hydraulic lines to run to the new brakes. I have attached links to a couple of helpful articles that explain what is needed to add hydraulic...
    view full answer...
  • How to Tell Left and Right Side of a New Dexter Axle without Taking Off the Hubs or Brakes
    If you look at the backs of the brake assemblies there should be a hole where the magnet wires come out and a little opaque plastic strap. So if you are looking at the back of the assembly and those items are on the left then it is the left side (drivers side). If on the right then it is the right side (passengers side). Or if you are unsure look for the Dexter stamp on the back of the brake assembly. There should be a part number there and I could look that up and tell you if it is a...
    view full answer...
    Image 1 for
  • One Electric Trailer Brake Assembly Drags When Brakes Are Applied on Tandem Axle Trailer
    If one of your tandem-axle trailer's four electric brake assemblies is dragging, but the three other brakes are functioning properly, you can check the malfunctioning unit for proper adjustment if it is an adjustable type. If it is not an adjustable brake assembly you can still inspect it to ensure there is no obvious physical damage to any of the mechanical components (pads, linkages, springs or magnet) that could be causing it to drag. You can also use a multimeter to test it for proper...
    view full answer...
  • Troubleshooting Trailer Brakes that Lock Up After Brakes are Applied for 10 Seconds
    When I first read your question I immediately thought that your brake controller must be setup wrong and that setting it up properly would fix your problem. It sounds like you have the gain set to high and the ramp up speed set too low on a time-delayed controller. What you will need to do is find a flat parking lot while connected to your trailer and travel about 25 miles per hour and then fully apply the manual override of your brake controller, if the brakes lock up lower the gain setting...
    view full answer...
  • Trailer Brakes Will Not Lock Up Even with Full Battery Power
    You may need to adjust the trailer brakes. Trailer brakes will need an initial adjustment so they are set properly. You need to be able to hear a slight but constant drag of the pads on the drum when the wheel is turned. I have linked a video to the right that should help. Go to about the 4 minute mark to see our installer adjusting the brakes.
    view full answer...
  • Trouble Shooting Trailer Brakes that are Locking Up
    I would start by adjusting the brakes. Even brand new self-adjust brakes need to be adjusted. I would think on a brand new trailer this would already be done but you never know. Take a look at the video I attached and skip ahead to around the 4:30 minute mark to see the brakes being adjusted. You also may just need to turn down the gain on your electric brake controller.
    view full answer...
  • How to Pick Out Replacement Hub for Trailer
    In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out. Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub...
    view full answer...
    Image 1 for
  • How to Pick Out Brake Assemblies and Hubs for Trailer Axle
    We have all the parts you will need but we don't have complete kits since the parts needed tends to vary from trailer to trailer. In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out. Next thing you will need to know...
    view full answer...
  • Can Boat Trailers have Electric Brakes
    While it used to be recommended that boat trailers never use electric brakes we are seeing more and more boat trailer manufacturers switch to electric brake assemblies without issue. If you have all of the wiring connections sealed properly in theory you would be totally fine. We still recommend people unplug their trailer wiring harnesses when backing into the water to help reduce the risk of shorts. I attached a help article on adding electric brakes to a trailer. Basically you would...
    view full answer...
  • Troubleshooting One Wheel Locking Up with Electric Brakes on a 2016 Travel Trailer
    One wheel locking up on your trailers brakes could be for a few reasons. The most likely reason is be due to a brake assembly that is out of adjustment. You want to adjust the assemblies so there is only a light drag on them when they are turned by hand. I have linked a video that will help show you how to adjust them starting at the 4:35 minute mark. The brake magnets could be worn causing uneven braking. You will want to test them with a multi-meter to see if they are still good....
    view full answer...
  • Are all Trailer Brake Assembly Magnets the Same
    Trailer magnets are designed set up for each brake assembly size axle capacity. If you check out the link I attached you will see all of the magnets we carry. From there you will need to click the brand you have, the size assembly you have, and then finally the axle capacity.
    view full answer...


< Previous
123. . .10



Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Sarah L
Expert Research:
Sarah L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Jacob T
Video Edited:
Jacob T
Employee Lindsey S
Updated by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Dustin K
Video by:
Dustin K
Employee David F
Installed by:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.