Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Right Hand - 7,000 lbs
(151 reviews)
Price: $174.44
In Stock
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Right Hand - 7,000 lbs
Item # 23-465
Our Price: $174.44
This item qualifies for Free Shipping
In Stock
- All Info
- Reviews (151)
- Q & A (0)
- Photos
- Why etrailer?
Dexter Accessories and Parts - 23-465
- Trailer Brakes
- Electric Drum Brakes
- Brake Assembly
- 12 x 2 Inch Drum
- Dexter
- RH
- Self Adjust
- 7000 lbs
12" x 2" Passenger's-side electric trailer brake assembly fits 7,000-lb axles. Mounting flange has a 5-bolt pattern. Nev-R-Adjust brakes require little maintenance. Fits 14-1/2" to 16-1/2" wheels.
Features:
- Electric brakes are easier to install and offer more user control than hydraulic brakes
- Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary
- Nev-R-Adjust brakes automatically adjust to deliver optimum performance and braking power
- No need for manual brake adjustments
- Proper adjustment leads to better brake efficiency and less wear on your tow vehicle's brakes
- Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes
- Mounting bolts and hardware included
- Made in the USA
Specs:
- Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO
- Configuration: right hand (passenger's side)
- Dimensions: 12" diameter x 2" wide
- Mounting flange bolt pattern: 5 bolt
- Wheel size: 14-1/2", 15", 16" and 16-1/2"
- Axle rating: 7,000 lbs
- 5-Year limited warranty
K23-465-00 Dexter 12" Nev-R-Adjust Electric Brake Assembly for 7K Axles - RH
Replaces 23-465
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Right Hand - 7,000 lbs - 23-465
Average Customer Rating: 4.8 out of 5 stars (151 Customer Reviews)
12" x 2" Passenger's-side electric trailer brake assembly fits 7,000-lb axles. Mounting flange has a 5-bolt pattern. Nev-R-Adjust brakes require little maintenance. Fits 14-1/2" to 16-1/2" wheels.by: Thomas 09/28/2021
I needed an order change and paula took care of everything even shipping came day early so i could get trailer reinspected. Will be my only place to order trailer parts ETRAILER
Comments
Very well Etrailer came thru with the parts ias in dire need of in a timely manner. I needed brake assembliies and drums for my 5th wheel Etrailer researched and very quickly got me the needed parts Not all parts were Dexter but that was expained to me. And the substitues worked very well. I will be a returning customer for sure ss they were very helpful while ordering and thru checkout.
Thomas G - 10/01/2022by: Sidney11/28/2022
I have had this item installed for approximately one year on our 42 foot, 18,000 pound 5th wheel. It was easy to install and set up and has worked flawlessly ever since. We have put over 6,000 miles on the 5th wheel since the installation. I will definitely buy again if the need arises.
by: PeteM57411/09/2022
Easy to install. I have taken several trips since then. I would buy this product again from etrailer!
by: Rob 09/27/2022
Worked well to replace grease covered shoes and magnet. Lower cost than replacing individual components.
by: Glen09/07/2022
You didn't have the brake assembly I wanted but had the 7k at a higher price. Was told there was no difference between the two. I bought the 7K but would like to know if there is no difference, why I was charged the higher price. I needed one so I didn't have much choice. Not Happy. I'll think twice and think again before purchasing from etrailer again.
by: Marty B08/03/2018
Order was received timely. I had questions regarding a possible design change going from two spring to single spring. I contacted customer service and they replied swiftly. Not being sure of the answer the customer service rep. Conner contacted the manufacturer to determine proper answer. All is good , apparently Dexter has changed from 2 spring to single spring at the top. The attached pictures show what I am referring to. Look at the wiring in the faulty picture. Of course pulling the hub was my last thing I looked at. Hence why I was getting a ground short and no brakes.
etrailer customer service get A+++
by: Arizona Slim05/08/2017
I had the brake lining shatter off of one of the shoes. This happened within the first 100 miles after putting the new brakes on. Tore the drum up beyond repair. Working on getting the brakes replaced under warranty but I had to ship them the parts back first. Trailer is up on blocks until then.
by: Mike A05/09/2019
One is what I had and the second is etrailer. All I ordered arrived in good shape. Everything fit perfectly. I will definitely use etrailer again soon!!
Thanks
Comments
Great. Product as advertised. Fit perfectly. Always use etrailer. Thanks again.
Mike A - 05/10/2020by: Randy 08/27/2022
Is what I needed, fit perfect. Just be sure to check the hardware is in place, I put it on and put the drum on and went to adjust and the adjuster was out of position and had to pull the drum back off.
by: Floyd06/16/2022
I put these brakes on my 14000 lb.trailer on year ago and have no problems.Very good product.
by: William08/30/2018
Product was an exact fit. Much easier than fighting springs and hold downs even with the right tools. It took about 45 min. per wheel start to finish. Etrailer was very helpful when ordering parts.
by: Anthony 09/26/2022
OEM replacement, worked great
by: Tim01/26/2023
ORDERED 2 LEFTS 2 RIGHTS GOT 4 RIGHTS
by: Chris O12/16/2016
Ordered lots of parts on Monday, received most of them by Thursday. The received parts were well packaged and undamaged. A few of the parts they didn't have in stock so they had those drop-shipped to me which should be delivered in the next couple of days.
No supplier I have ordered any parts from has such a great technical reference web site or personal customer support. Yea, Rebecca - Well Done! Yes, I'm very happy with the pricing.
Thanks for your great support and I look forward to doing business with them again. More info to follow as soon as I can get the parts installed on my trailer.
by: Ed Wagner07/15/2021
Christina J thanks for all your help the brake assembly was delivered extremely quick and installed easily!
by: David03/10/2022
As usual, etrailer came through with quick shipping and a great product. The brake assembly installed easily and performed as it should. etrailer is by far the best company for trailer products!
by: Mario04/19/2022
It works great, I replaced my manual brake adjuster with this automatic brake adjuster. My brakes are always adjusted, one less thing I have to do.
by: Skip 12/13/2020
Easy to install, exact replacement. Fast shipmen from etrailer.
Comments
No issues a year later.
Skip - 12/14/2021by: Dalton 10/06/2022
good work.... thanks.
by: Michael08/18/2022
Great job was delivered a day early 687 miles away nice job
by: David07/28/2022
Everything was there when we got the order. Everything is as advertised. Very satisfied
by: Curt G.04/27/2017
Great price for a complete brake replacement. Way easier and not much more than just replacing the shoes. I upgraded from the 6000# that were on my fifth wheel to these 7000# ones. Also like the self adjusting feature.
by: Brad07/08/2019
Product installed easily. Much more efficient than replacing the parts I would have needed and less costly. Part used on a Dexter 7000 lb RV axle.
Comments
Working well, as it should but it is on a 5th wheel and doesnt have s lot of moles on it.
Brad - 07/09/2020by: Donald11/29/2018
Arrived in good condition. All new parts and easy to install. Only concern was that the wire to the magnets on the inside might get rubbed against by other parts or get pinched. I slipped small plastic hose over wires as extra protection. Be sure and follow instructions and and adjust brakes after installing hubs.
by: William05/31/2022
Easy fix when you need everything
25
151
Show More Reviews
See what our Experts say about this Dexter Accessories and Parts
- Dexter Nev-R-Adjust Electric Brakes Not Working on CamperThe Dexter Nev-R-Adjust Electric Brake Assemblies, such as # 23-465, require an initial adjustment, as you have done already. You are correct in your question when you stated that you will want to simply turn the wheel backwards on the brake assembly until you get just a slight drag. I have attached a video demonstration on the initial setup for these assemblies that you may find helpful. I recommend pulling the hub on your trailer to make sure everything is still properly in place with...
view full answer... - Replacement Trailer Brake Assemblies for Dexter 7k Automatic Adjusting AssembliesThe brake assemblies you have are Dexter 12 inch assemblies with a 7k capacity. That means the current part numbers you would want are # 23-464 for the left hand side and part # 23-465 for the right hand side. The part # 23-464-465 that you referenced actually is both of these assemblies kitted together.
view full answer... - Is it Okay to Use Nev-R-Adjust Brakes with Nev-R-Lube HubsAs long as the brake assemblies you are replacing are 12x2, you can certainly use the Nev-R-Adjust brake assemblies. The brake assembly and the bearing system you are using would be unrelated, so there is no reason why you could not use the Nev-R-Adjust assembly. There is also no reason why you could not upgrade to the 7000 lb capacity assembly like the # 23-464 and # 23-465. The brake shoes will be better and the magnet will be a bit stronger.
view full answer... - How to Determine the Right Replacement Brakes for a 2005 Keystone Challenger 5th Wheel TrailerDexter Nev-R-Adjust electric brake assembly # 23-464 for the left side and # 23-465 for the right side are designed for 7,000 pound trailer axles. These are 12 x 2 inch brakes. If you have 7,000 pound axles then you can measure the inside of the brake drum. If the inside diameter is 12 inches and the inside width is 2 inches then they will fit.
view full answer...
- Will Hydraulic Brake Hubs Work With Electric BrakesMy contact at Dexter said that the hubs will be the same for hydraulic and electric brakes on their 7,000 pound axle. For electric brakes for your 7,000 pound axles, I recommend the 12 Inch Dexter Nev-R-Adjust Electric Brake Assembly # 23-465 for the right hand side and # 23-464 for the left hand side. These brake assemblies do not require any manual adjustments to be made, they automatically adjust to deliver optimum performance. I have attached an installation video of these brakes for you.
view full answer... - Recommendation for Replacing Electric Brakes on a 7k Dexter Axle with Brakes Mounted Upside DownThe brake assemblies like the 12 inch Nev-R-Adjust Electric Brake Assembly, item # 23-464 and # 23-465, that you ordered, are designed to be installed with the brake magnet below the axle, not above. We cannot recommend installing the Nev-R-Adjust assemblies upside down. I would check the axle. If it is a straight axle with no arch in it, then the axle has been installed upside down. If it is an arched axle with the bend oriented upwards, then the mounting flange has been welded on upside...
view full answer... - How Do Dexter Nev-R-Adjust Electric Drum Trailer Brake Assemblies WorkBesides the initial adjustment, which is not required but still recommended, you will not need to adjust the Nev-R-Adjust Electric Brake Assembly, # 23-464, unless you wanted to. According to Dexter, during travel, the brakes will automatically rotate an adjuster assembly to close the gap caused by lining wear. The brakes will remain in the optimum braking adjustment for safer braking. The Nev-R-Adjust Electric Brake Assembly for the right hand side is # 23-465.
view full answer... - Dexter 7,000 lb Rated Brake Assembly Recommendation for TrailerDexter would be the final authority on the capacities of their axles. For 7k rated Dexter brake assemblies you would want the part # 23-465 for the right hand side and part # 23-464 for the left hand side. What you described is not uncommon for Dexter axles. There are other instances where the difference between the capacities of two axle setups is either the assemblies or the hubs they put on them.
view full answer... - Recommended Brake Assemblies for 7,000 Pound Trailer Axle, 2009 Heartland Bighorn 3370RLIt is best to confirm the axle capacity before purchasing brake assemblies. There should be a sticker or label on the axles with information such as their capacity. If you do find that your axles are 7,000 pound axles, I recommend using the Dexter 12 Inch Nev-R-Adjust Electric Brake Assembly, left hand side # 23-464 and right hand side # 23-465. These brake assemblies automatically adjust to provide optimum performance and braking power. In addition to eliminating the need for brake adjustments,...
view full answer... - Will the Dexter 12 Inch Nev-R-Adjust Brake Assembly # 23-464 Fit on a 2007 Newmar Cypress 5th WheelI spoke with the parts department at Newmar and he told me they only use Dexter brake assemblies on their trailers, so the Dexter 12 Inch Nev-R-Adjust Electric Brake Assemblies, # 23-464 (left) and # 23-465 (right), should work with your 7,000 lbs axles on your 2007 Newmar Cypress 35KSRL fifth wheel trailer. To confirm that they will work, you can compare the mounting bolt pattern of these brakes to the bolt pattern of your brake mounting flange or to your current brake assemblies.
view full answer...
- Electric Trailer Brake Assembly Recommendation for 6K or 7K Axles with 8 Lug Bolt PatternThe Dexter 6K and 7K axles are very similar to each other, so it can be difficult to determine their capacity just by looks. Dexter axles typically have a specs plate near the center of the axle, but there is a chance that it could have come off. The next place I would look for an indication of the axle capacity is the identification plate on the tongue of the trailer. There should be a plate that lists the Gross Vehicle Weight Rating (GVWR) and Gross Axle Weight Rating (GAWR). That should...
view full answer... - Are New Brake Drums Required When Installing New Dexter Brake AssembliesIf the hub/drums are in good shape there's no need to replace them when doing new assemblies like the part # 23-465 and # 23-464 which are the correct self adjusting brake assemblies for a 7k Dexter axle.
view full answer... - Best Electric Brake Assemblies for 7,000 Pound Rockwell AxleFor your 7,000 pound axle the Dexter Nev-R-Adjust Electric Trailer Brake Assembly # 23-465 for the Right Hand and # 23-464 for the Left Hand will provide you with the best and most reliable setup. Dexter is well known in the industry for their USA made trailer brakes and they been doing it for over 50 years. These particular 12 x 2 inch assemblies feature a Nev-R-Adjust design that eliminate the need to perform any periodic manual adjustments after the initial install (they simply adjust...
view full answer... - Replacement Brake Assembly for 2007 Newman with 7k AxlesThe simplest replacement brake assembly solution we have for your 2007 Newman with 7,000 lb axles is the part # 23-465 for the right hand side and part # 23-464 for the left hand side. These are self adjusting too which means you won't have to worry about ever needing to tighten them up.
view full answer... - Info Needed to Find Self Adjusting Trailer BrakesThe Dexter Nev-r-Adjust assembly part # 23-464 is a self-adjusting 12 inch by 2 inch assembly for a 7,000 lb axle that has a matching right side of # 23-465. If your trailer has a different size/capacity need let me know what that info is and I will set you up with the parts you are in need of. I attached an install video for the assemblies mentioned as well.
view full answer... - Can 7,000 lb Dexter Nev-R-Adjust Trailer Brakes be Used on 6,000 lb AxleYes, so long as your 6,000 lb Dexter axle has a 5-bolt brake mounting flange (which it should), then you can use the Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Right Hand - 7,000 lbs # 23-465. If you also need the left hand side the correct part number is the Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Left Hand - 7,000 lbs # 23-464.
view full answer... - Troubleshooting Dexter Nev-R-Adjust Brakes That Have Not Adjusted Properly After 300 Miles of TravelWhile Dexter Nev-R-Adjust brakes like the Dexter Nev-R-Adjust Electric Trailer Brake Assembly # 23-464 and # 23-465 can be manually adjusted, it is highly recommended that you do not manually adjust them. They were not designed to be adjusted that way and can be easily over adjusted and difficult to correct if over adjusted. Since you have said that you have already driven the trailer over 300 miles and they are still not adjusted properly, you likely have something else wrong. I would...
view full answer... - Does the Dexter Nev-R-Adjust Trailer Brake Kit Come As a PairNot a dumb question at all! Brake assemblies like the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7K # 23-464-465 are either sold in matching pairs or as single brake assemblies for either the left or right side of the trailer # 23-464 (left) or # 23-465 (right). This particular kit is sold as a pair, so if you have tandem axles on your 2014 Grand Design Solitude 305re you'll want to order 2 of these brake kits. Additionally, these brake kits...
view full answer... - Can Manual Adjusting Brakes Be Swapped out for Self-Adjusting BrakesYes, the self-adjusting version of the Dexter Electric Trailer Brake Assembly part # 23-181 is the Dexter Nev-R-Adjust Electric Trailer Brake Assembly part # 23-465. This assembly is for the right hand side and if you need the left hand side you can use part # 23-464 or part # 23-464-465 for both right and left hand side. The Dexter Nev-R-Adjust Electric Trailer Brake Kit has self-adjusting brakes meaning you do not have to turn the adjuster screw for even brake pad wear after the initial...
view full answer... - Availability of Trailer Brake Assemblies K23-464Sounds like you are looking for # 23-464 and # 23-465. These are the right and left hand brake assemblies that match the number you listed. These are a 7k rated assembly that are designed for 5 bolt mounting flanges and fit 12 inch hub/drums.
view full answer... - Can 7k 12 x 2 Nev-R-Adjust Trailer Brakes be Used in Place of 6k 12 x 2 Inch Trailer BrakesWe do have some 12 x 2 inch Nev-R-Adjust electric trailer brakes for 7k axles. Left hand side is # 23-464, right hand side # 23-465. Current pricing is listed on the product pages for these brakes. If your brake mounting flanges have the 5-bolt pattern then you can use the 7k brakes and they will fit the same drums as the 12 x 2 inch brakes for 6k axles. Even Nev-R-Adjust brakes have to be adjusted when first installed but after that they will adjust themselves. Otherwise you would have...
view full answer... - Nev-R-Adjust Electric Drum Trailer Brakes for a Trailer with 7K Dexter AxlesMost 7K axles are going to use 12 inch by 2 inch brakes. To determine if these are the right size you can measure the internal diameter of the drum and the width where the pads would make contact with the drum. I am confident that it will turn out to be 12 x 2 inches. For Dexter Nev-R-Adjust electric trailer brakes for 7K axles use # 23-465 for the right hand side and # 23-464 for the left hand side. These brake assemblies mount on a 5-bolt mounting flange. Even though these are Nev-R-Adjust...
view full answer... - Weak Brake Troubleshooting and Replacement Brake Assemblies for 7k Trailer AxleThere are a couple things you should check before you would want to replace your brake assemblies. I would check the main ground for the trailer. This is the wire that runs from the trailer connector to the trailer frame and provides the ground for the entire trailer. The ground strap may have come loose and now may not be strong enough to fully apply the trailer brakes. Some brake assemblies are manually adjusted. They could very easily be in need of adjustment. You will want to have...
view full answer...
- Difference Between the Two Types of 12x2 7000 lb. Brake AssembliesThe difference between the two brake assemblies comes down to one being self adjusting and one that is manually adjusted. I recommend the self adjusting because you will never have to crawl under the trailer to adjust the brakes. This can be a headache and we tend to not do it as often as we should which leads to poor performing brakes. With the self adjusting it automatically tightens as the shoes wear down keeping your trailer's braking performance optimized and working as safely as...
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Lindsey S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Hannah L
Installed by:
Jeff D
Video Edited:
Joshua S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.