bing tracking image
  1. Accessories and Parts
  2. Dexter
  3. Trailer Brakes
  4. Electric Drum Brakes
  5. Brake Assembly
  6. 10 x 2-1/4 Inch Drum
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
Dexter

Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs

Part Number: 23-469
In Stock
$100.05
Retail:$117.59
You Save: $17.54
Accessories and Parts
Add to cart
Accessories and Parts 23-469 - Brake Assembly - Dexter
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
10" x 2-1/4" Passenger's-side electric trailer brake assembly fits 3,500-lb axles. Mounting flange has a 4-bolt pattern. Nev-R-Adjust brakes require little maintenance. Fits 13" to 15" wheels. 1-800-940-8924 to order Dexter accessories and parts part number 23-469 or order online at etrailer.com. Free expert support on all Dexter products. Great prices and Fastest Shipping for Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (2483)
  • Q & A (0)
  • Photos

Dexter Accessories and Parts - 23-469

  • Trailer Brakes
  • Electric Drum Brakes
  • Brake Assembly
  • 10 x 2-1/4 Inch Drum
  • Dexter
  • RH
  • Self Adjust
  • 3500 lbs

10" x 2-1/4" Passenger's-side electric trailer brake assembly fits 3,500-lb axles. Mounting flange has a 4-bolt pattern. Nev-R-Adjust brakes require little maintenance. Fits 13" to 15" wheels.


Features:

  • Electric brakes are easier to install and offer more user control than hydraulic brakes
    • Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary
  • Nev-R-Adjust brakes automatically adjust to deliver optimum performance and braking power
    • No need for manual brake adjustments
    • Proper adjustment leads to better brake efficiency and less wear on your tow vehicle's brakes
  • Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes
  • Mounting bolts and hardware included
  • Made in the USA


Specs:

  • Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO
  • Configuration: right hand (passenger's side)
  • Dimensions: 10" diameter x 2-1/4" wide
  • Mounting flange bolt pattern: 4 bolt
    • Distance between bolt holes: 2-7/8" apart on center
  • Wheel size: 13", 14", and 15"
  • Axle rating: 3,500 lbs
  • Limited 5-year warranty


K23-469-00 Dexter 10" Nev-R-Adjust Electric Brake Assembly for 3.5K Axles - RH

Replaces 23-469





Customer Satisfaction Score:


Customer Reviews

Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs - 23-469

Average Customer Rating:  4.8 out of 5 stars   (2483 Customer Reviews)

10" x 2-1/4" Passenger's-side electric trailer brake assembly fits 3,500-lb axles. Mounting flange has a 4-bolt pattern. Nev-R-Adjust brakes require little maintenance. Fits 13" to 15" wheels.

by:

Excellent. Be sure your axle bearing seals are not leaking grease onto the backing plate.



by:

Fast shipping and great communication. Everything looks good and comes with hardware. I don't know about longevity yet, but it's made in the USA, I'm sure they will last a while.



by:

Order arrived on time, packaging and product were in new condition. Everything looking good so far.

Randy

6/21/2024

so far so good. no negative issues.



by:

Brakes work great! I used a self tapping screw to ground the brake to the trailer. This worked really well and I didn't need to run a ground wire. The studs needed a trip to the hardware store to get some 7/16 by 40 pitch (fine thread) nylock nuts. All in all a nice brake setup.

Jonathan

8/23/2016

The brakes work great! Im really happy that I took the time to install them.



by:

Needed to replace a magnet and brake shoes were well worn, this was the best way to go. Quick and easy replacement.



by:

Absolutely the best service on the web. Immediate notification of the order, packing, shipping, and arrival. Got all the parts and they were perfect...just as expected. Watching the eTrailer video also helped a ton on swapping out the bearings and races. Wiil be back at their door for more!!!



by:

I feel a lot better knowing I have a new and working brake system on my vintage 1973 Shasta travel trailer. Thank you and for the very fast shipping. Arrived sooner than expected.



by:

Cleaned and packed my bearings and all 4 brakes on my new to me trailer and did my first trip, 5 days from FL to VA and back, trailer and brakes did great!



by:

Quality in every way. Highly reccomend ed



by:

Part was corect and no issues installin g.



by:

I purchased 4 of the Nev-R-Just drums for my 1999 enclosed trailer. I had been fighting the elec brakes in that trailer for years, re-wiring the drums and replacing the magnets on some of them. But I just got tired of it and found these had great reviews, are made in the USA and quite reasonably priced. Shipping was super-fast, but I only live a couple of hundred miles from where they shipped.

The worst part of the install was getting the old drums off. I think they used some kind of crushed nut type lock nut on them at the factory as they were HARD to turn the whole way out. And I had soaked them with PB Blaster for a couple of days before hand, as well as using WD40 during the extract. I could only get my impact on 1, maybe 2 nuts per wheel because of interference. I had 4 of the studs break loose from the old drums and just start turning. I had to use my die grinder on the brake shoe side to get the assembly off. Quite a job there.

But the new stuff bolted up nicely. I soldered all the wires, used heat shrink tubing and the split loom tubing on top of that. So a nice, clean install that will hopefully last for years. I've towed the trailer once since the install and the difference is very clear. So nice to have all 4 brakes working well again.

Only gave it 4 out of 5 for two reasons. First is the test of time. I think these will last for years, based on the reviews, but only time can determine that. Second is the lack of includes. I did see from the reviews I needed to order the nuts and lock washers, but missed that I'd need the rubber plugs for the adjuster holes on the back. These have two of those holes per drum where my old ones only had one. So I ended up 4 short and am now searching for them. It would be nice if they added $2-3 per wheel and just included that stuff.

Steve S.

5/14/2014

I agree.. why would we not need nuts,washers n plugs... thought that was not right to leave out..spent more time acquiring nuts than doing the installation...cheap...

Bill

7/29/2015

First time maintaining my Hallmark trailer besides greasing bearing. EASY,FAST to just replace drums and hubs. These kits are the BOMB!!!!!



by:

Last Saturday, after several weeks of research, my wife and I purchased a trailer. It had everything we wanted except for brakes. I asked the dealer if they could install brakes, he said it would take weeks if not longer for him to get the parts and then he would have to arrange for them to be installed.

I told the dealer that I had already done some preliminary research on eTrailer.com for brake parts. On a long shot, I asked the dealer if he could beat eTrailer.com prices for the brake parts and if so I would install. To the dealer's credit, he told me I would be much better off getting the brake parts I needed on my own. So, late Sunday evening I went onto the eTrailer.com website. After taking a couple of measurements to ensure I was ordering the correct parts, I placed the order. Their website is user friendly and intuitive, and the tutorial videos are excellent.

Early Monday morning I got a message from one of eTrailer's employees notifying me that my parts had shipped. He also offered his services if I needed anything further or if I had any questions. I did have questions, so I called him, I wanted to confirm that I had ordered the correct bolt pattern for the hub/drums. Within a couple of minutes we confirmed that I had taken the correct measurements. The reassuring part was, he said if you find the hub/drums are not the correct ones, let me know and we will get a return label out to you and get the correct parts out to you.

By early Thursday afternoon the parts had arrived. I had already watched the installation tutorial video that is on their website. Following the video process, the install was straight forward and PAINLESS. This company is so refreshing!

Ken

11/15/2017

Thanks for the follow up. For almost 10 years now, I have been very happy with the service, products and value that I get from etrailer. So much so, that I refer friends and family to your website as their needs arise. As the mechanic in the family, and around the neighborhood, I often have people approach me for help. Several times a year I find myself referencing etrailers website to find a part we need or that will make a job easier to complete. Additionally, I CANT SAY ENOUGH how helpful etrailers on line video library has been with installations and to help answer questions or trouble shoot problems. I really appreciate that etrailer would take the time and resources to build such a library to help their customers.



by:

Perfect replacement for my trailer. etrailer is only place I buy trailer related parts from. Always excellent service. Fastest shipping in the industry.



by:

The brake pads we received from etrailer.com were EXACTLY what we were looking for. The installation was simple and went very well. Nice product. My trailer is 20 years old and these brakes did the job. Also, we went from standard brakes to self-adjusting so no maintenance is necessary. We can now go camping!

The staff at etrailer (Katie G) were so helpful. We were desperate for the product and she made sure we got the brakes within 3 days. Amazing! Thank you so much. We will definitely use etrailer.com again.

Robert K.

6/11/2020

Great!

Robert K.

6/11/2020

Great!



by:

Heads up!!
ordered 4 sets of hub, drums
and brakes over two years ago for a project I've been slowly working on. when I received the items, I noticed the packaging was damaged and reported it to etrailer. 2 years later, I finally went to use the items and discovered the bearings, caps and races had been damaged. I notified the management at etrailer and within a week had complete replacements.
What company in this day and age is willing to stand behind a damage claim two years on? Truly remarkable customer service and willingness to go the extra mile.
etrailer, You've won me forever as a devoted and satisfied customer. you guys are rock stars! Thank You.



by:

The brakes were a perfect fit. I'm changing over from hydraulic surge brakes to these electric brakes and so far I am impressed.

Gary G.

5/10/2015

The brakes still function properly and I am very satisfied with them.



by:

Brake assemblies were easier than replacing components and cost effective. Add self adjusters as a bonus. Installation was quick and easy. Packing for shipping could have been better.

James R.

7/29/2016

I do not use my trailer very often but the brakes are working fine.



by:

My 2012 travel trailer came equipped with 1-3/4” wide brakes, which is not a common size. When it was time to do maintenance I went to etrailer.com because of the wealth of information and advice available. After reading the information it became obvious that the best course of action would be to upgrade to 10 x 2-1/4” brakes and hubs. My supplies arrived in good shape, with the Dexter boxes inside of other boxes from etrailer. After watching helpful videos I installed the new brakes in a day. Things went smoothly, installing new complete brake sets is so much easier than messing around with individual parts, and probably about the same cost. Now came time to wear in the brakes and check things out. Beware that it is really tempting to not wait long enough for the brakes to cool in between evolutions where you apply them hard and go from 40 to 20 MPH. They can get pretty hot. The end result is that now we have much more braking power, the braking is smoother, and we have confidence in our ability to stop which is priceless. Not having to adjust our brakes is a plus. We are very pleased with our Dexter never adjust brakes and especially pleased with the exceptional customer service and expert advice from etrailer. Add in the price guarantee and dealing with them is truly a no-brainer.



by:

This is the exact brake assembly that came on my trailer when it was new (18ft aluminum car hauler by R and R Trailers of Three Rivers MI) . Same part from the same manufacturer. I purchased 4 new ones because after 3 years of non-marine use, one of the brake linings came off and locked up one of the trailer wheels causing it to flat spot one of the tires bad enough to require the tire's replacement.

Shipping: I received them very quickly. But of the 4 assemblies ordered, 2 of them had damaged wiring due to poor packaging by the seller. I considered sending them back, but because I needed to use the trailer soon, I simply repaired the damaged wires and installed them.

Removal: This is not easy or fun. Each of the brake assemblies is held on with 4 mounting studs and nuts. These nuts are 7/16-20 i.e fine thread, which are not included. This wasn't really a problem except that these nuts were not in stock at my local Home Depot, Lowe's, or Tractor Supply. After driving all over the place looking for the mounting nuts, I finally found them at Fastenal. Removing the existing brakes was a nightmare. After soaking the existing mounting nuts in PB Blaster, I tried to remove them to find that they were so difficult to get off that they actually caused the studs to break free from where they had been pressed into the backing plate and just spin freely. Of the 16 mounting studs (4 studs x 4 brake assemblies) only 3 of them actually came off and the rest had to be cut off. This pretty much took all day to accomplish. Again, the existing trailer brakes were the *identical* brake assemblies that I purchased, but with 3 years of highway use. I would expect this much difficulty if it was on a boat trailer due to the regular submersion in water, but I would expect less corrosion on a car hauler.

Installation: Once I had cut off the existing brake assemblies, Installation was not very difficult. Before I mounted them, I took them down to my local welder and had him tack weld the studs in place so that they wouldn't break free from the backing plate when/if I ever needed to remove these again. I anti-seized the studs and mounted them to the trailer & connected the wiring. I had to reuse the star wheel access port plugs because they did not come with new plugs.

I think this is an ok product considering that these brake assemblies adjust themselves as the shoes wear down, and I find this greatly superior to the other method of having to adjust them yourself. I would actually still consider purchasing these brakes again, even after all that.

My complaints are as follows:

- shoe failure after 3 years of highway use resulting in tire failure
- damaged wiring due to poor packaging
- lack of mounting nuts and the difficulty in finding new ones
- lack of new access port plugs,
- *especially* the poor quality of the backing plate and studs

A product with a "made in USA" label just shouldn't have this many issues with it.



by:

I purchased a left and right brake assy and installed them as per videos and instructions. After towing for 50 miles one side is fine but on the other side both shoes have cracked. I will now have to replace them.

Mike M.

12/10/2014

A follow-up. Within a day of etrailer hearing of my problem, they initiated contact and are replacing the brake assy under warranty. I would have to give them six stars for their customer service and professionalism. Once again the left side was fine so it was probably just a fluke as Dexter parts are usually perfect. I have bought from etrailer.com many times in the past and will continue to do so.



by:

I have been using these brakes for one year, about 3000 miles.

Very happy with the quality and price. These are the OEM Dexter brakes for the 3500 lb axle. These were very easy to install and were an exact fit. Nice feature is the auto adjust when the trailer is backing up. No more lifting the axle and climbing underneath to make sure breaks are properly adjusted.



by:

Generally speaking the product seems like a good buy. I looked at the different options at Etrailer and decided on the Dexter units even though they were slightly higher - made in USA. My package of parts arrived 3 days after ordering - a good deal considering the freight cost was $0. One of the brake assemblies had the self adjuster knocked halfway of in spite of the stiff spring hold it together to the shoes. I suspect this happened during shipment and due to bulk packing the 4 assemblies in a box. I would suggest that Etrailer warn their customers to look at their parts carefully upon receipt. I also was concerned about one of the 7/16" mounting studs being knocked out. I found the stud in the carton and reset it into the backing plate and did not have any issues in the installation.

All in all the process went well from ordering to installation. I appreciated all of the helpful videos on line that helped with the ordering process and gave me a heads up on making sure to order nuts, washers and plugs for the adjusting ports.

I would have given the review a 5 except for the packaging which could stand a little improvement.



by:

US produced, but like any parts, watch out for slivers and sharp edges. Nice to find an assembled fresh unit for the price of the normal rebuild parts, and with the BONUS of self adjustment! Application of lubricant to adjuster threads and thrust surfaces will help insure longer reliability. Quick friendly service with excellent focus on customer satisfaction. Thank you!

Tom S.

2/18/2016

Brakes self adjust well



by:

First time customer. I accidentally duplicated my order, so I called e-trailer. There customer service was A+. Delivery was prompt. Installation was a breeze referencing installation video. Note: Be sure to buy the nuts as I thought I could buy at Lowes or home depot, autozone, napa. Nothing! I had to go to a local nuts and bolts store. It's easier to just buy the nuts when you order the brakes. I have not towed my trailer yet, but will write another review when I go camping. I purchased the brakes based on customer reviews. Thanks E-trailer.



by:

My experience was incredible. I couldn't believe how fast the parts were delivered.


25
2321
Show More Reviews

See what our Experts say about this Dexter Accessories and Parts

  • Replacement Self-Adjusting 10 inch Dexter Trailer Brake Assemblies
    For a set of 10 inch brake assemblies from Dexter you would want the part # 23-469 for the passenger side and part # 23-468 for the driver side. Since you most likely have 3,500 Dexter axles the bearing kit you would want that includes a seal is the part # BK2-100. This is a bearing kit for the 84 spindle which has L44649/L68149 Bearings and a 10-19 Double Lip Seal.
    view full answer...
  • Self-Adjusting Electric Trailer Brakes to Replace Dexter 10x2-1/4" 36-19 Brake Assemblies
    We do have self-adjusting electric trailer brakes that will fit in place of your manual adjust 10 x 2-1/4 brakes. You can use our house brand, # AKEBRK-35R-SA for the right and # AKEBRK-35L-SA for the left. If you want the Dexter brand then use # 23-469 for the right and # 23-468 for the left. I have linked some video reviews of these brakes for you.
    view full answer...
  • Replacing Hydraulic Surge Trailer Brakes with Electric Drum Brakes
    Dexter 10 x 2-1/4-inch electric drum brakes # 23-468 and # 23-469 are a perfect choice for your 3500-lb axle that has a 4-bolt brake flange. We see more and more boat trailer manufacturers specifying electric drum brakes as standard equipment due to their lower cost and easier installation. Electric brakes require a compatible brake controller like the Prodigy P2 # 90885. To choose new hub/drum assemblies you'll need to know the bearings used in your existing hubs; this will ensure new...
    view full answer...
    Image 1 for
  • How to Increase Braking Force of 2015 Raptor 5th Wheel Trailer
    Ideally your 5th wheel's electric brake assemblies and your trailer brake controller will both be adjusted so that at full power on the controller (as when you hit the emergency manual override lever) the brakes have tension on them just below the point where they will lock up. You do not want to have the brakes actually lock up as this could cause loss of control. You can check the brake assemblies to see if they need to be adjusted. On the brake there will be a star wheel adjuster (please...
    view full answer...
    Image 1 for Image 2 for
  • Can 3500 lb AL KO Brake Assemblies be Replaced with Dexter Brake Assemblies
    Yes, the Dexter Nev-R-Adjust brakes will work with your 3,500 lb AL-KO axles. Brake assemblies attach to the brake mounting flange that is welded to the axle or spindle. The brake mounting flange on the 3,500 lb AL-KO axles uses a standard 4-bolt pattern that is compatible with AL-KO 3,500 lb brake assemblies and Dexter brake assemblies. For the left hand brake assembly, you can use part # 23-468 and for the right hand use part # 23-469. I have attached a review video for the Nev-R-Adjust...
    view full answer...
  • Will 10 x 2-1/4 Inch Trailer Brake Shoe Pads Part BP04-095 Fit 10-Inch Nev-R Adjust Brake Assembly
    Thanks for sending us a picture! The 10 x 2-1/4 inch trailer brake shoe pads part # BP04-095 you referenced only works with the manual adjust brake assembly. What you need is the left hand shoe lining # K71-681 and/or right hand shoe lining # K71-682 to fit the Dexter 10-inch Nev-R adjust brake assemblies. What I recommend instead of buying the replacement shoe liners, is replacing the entire brake assembly with part # 23-469 (right hand) or # 23-468 (left hand). The reason is because...
    view full answer...
    Image 1 for
  • Replacement Pads/Shoes for 10 Dexter Nev-R-Adjust Electric Trailer Brake Assemblies
    Yes, we do have the replacement brake pads (also known as shoes) for the Dexter Nev-R-Adjust Electric Trailer Brake Assembly # 23-469 (right hand) as well as part # 23-468 (left hand). These are found as parts # K71-682 and # K71-681 respectfully. Please note that it is typically more cost effective to swap out the whole brake assembly. Another perk to doing this is that you can be confident that other internal components aren't excessively worn down from prolonged use.
    view full answer...
  • What is the Difference Between Self Adjust and Nev-R-Adjust Brakes
    The difference between self Adjust like the # AKEBRK-35-SA and Nev-R-Adjust like the # 23-468-469 is that there isn't really a difference. Nev-R-Adjust is just what Dexter calls their self adjusting brakes. We do have both the right side # 23-469 and left side # 23-468 of the Dexter Nev-R-Adjust available, or together in kit # 23-468-469.
    view full answer...
  • Trailer Hub/Drum and Brake Assemblies to Fit in Place of Dexter 3,500 lb Axle Idler Hub
    Yes, the Dexter trailer hub/drum K08-247-94 # AKHD-545-35-EZ-K will fit the same spindle as the idler hub # 84545BX you mentioned and the correct assemblies are part # 23-468 and # 23-469.
    view full answer...
  • Does Trailer Brake Magnet BP01-110 Replace Magnet on 10 Inch Nev-R-Adjust Electric Brake Assembly
    Yes, the Dexter Trailer Brake Magnet, # BP01-110 is a direct replacement for the magnet used on the 10 Inch Nev-R-Adjust Electric Brake Assembly, # 23-469. This trailer brake magnet fits Dexter 10 inch x 2-1/4 inch electric brakes for 3,500 pound axles.
    view full answer...
  • Can Self-Adjusting and Manual Adjusting Braking Assemblies Be Mixed
    It is not advised to mix self-adjusting and manual adjusting braking assemblies on the same axle. It is also not advised to use self-adjusting braking assemblies on one axle and manual adjusting braking assemblies on the other. The result of doing so would be uneven braking pressure which would result in control issues as well as safety concerns. If you have a 3,500 lb axle or multiple 3,500 lb axles on your trailer then you will need to use the Dexter Nev-R-Adjust Electric Trailer Brake...
    view full answer...
  • Availability of Dexter Axle Brake Assemblies K23-026-00 and K23-027-00
    We do have the regular Dexter Axle brakes and their Nev-R-Adjust equivalents. The regular (manually adjusted) brakes that you are wanting are listed as part # 23-26 for the Left Hand side and part # 23-27 for the Right Hand side. Their Nev-R-Adjust equivalents are parts # 23-468 and # 23-469 respectively. The Dexter Axle hub and drum assemblies that we have for a 3,500 lb axle use the Inner Bearing # L68149 and Outer Bearing # L44649. If you have a 5 on 4-1/2" bolt pattern then you want...
    view full answer...
  • Do Trailer Brake Assemblies on Both Axles Need to be Replaced at the Same Time
    Trailer brake assemblies will typically all wear at the same rate. This means that when you find assemblies that are worn and in need of replacement, most likely the remaining assemblies on the trailer will require replacement too. With that being said, it is not required to replace the brake assemblies on both of your axles at the same time. If you check the condition of all of them and only the ones you mentioned are worn, then you can leave the assemblies on the other axle alone for...
    view full answer...
  • Replacement Hubs and Brake Assemblies for 2006 Haulmark Thrifty Hauler
    Since we know you have a Dexter 3,500 lb axle on your trailer the Hub part # AKHD-545-35-EZ-K is going to fit and work well for you. I would go ahead and replace all of the hub drums now unless you are on a super tight budget. Having everything new on the trailer will give you added peace of mind. The self adjusting brake assemblies part # 23-469 would be correct for the right hand side and then part # 23-468 for the left hand side would be correct as well. These components and the other...
    view full answer...
  • Are New Brake Drums Required if Replacing Electric Brake Assemblies on a Trailer
    If you already have brake drums you will not have to replace them unless they are damaged or became overheated and have discoloration on the inside armature surface where the magnet rides, grooves in the armature surface, or severe wear where the pads ride. If the drums are in good shape there really isn't a benefit to getting new ones when you replace the brakes. Speaking of the brakes if you are looking for 10 x 2-1/4 inch assemblies I recommend our brand # AKEBRK-35L-SA for the left...
    view full answer...
  • Compatibility of Dexter 23-468/23-469 Brake Assemblies with Al/Ko Brake Drums
    The Dexter # 23-468 (driver side) and # 23-469 (passenger side) brake assemblies will be compatible with your existing brake drums as long as: -The existing drums dimensions match the dimensions of the 23-468/9 assemblies, which are 10x2-1/4. In order to fit, the inside depth and diameter of your existing drums should also be 10x2-1/4 inches. -The armature surface (surface the magnet rides against) isn't excessively grooved or discolored by excessive heat. If the metal has a bluish tint...
    view full answer...
    Image 1 for
  • Is the Timbren Axle-Less Suspension System 2000 lbs Compatible with Electric Brakes
    You can use electric brakes with a Timbren Axle-Less Suspension System rated for 2,000 lbs, however, you would need the Heavy-Duty system, part # ASR2KHDS01. The Timbren Axle-Less suspension system, # A20RS545, that you referenced is not compatible with trailer brakes because it does not have a brake mounting flange at the base of the spindle. The Timbren Heavy-Duty system, comes with a brake mounting flange with a 4 on 4 bolt pattern which fits most 10 inch brake assemblies. The brake...
    view full answer...
  • How to Know When Trailer Brake Magnets are Worn Out and Need Replacing
    Are there any visible signs of wear on the magnets like exposed windings then that would indicate they need replacing. Magnets can go bad without showing visible signs of wear though. To see how to troubleshoot them check out the help article I attached. For replacement magnets for the Dexter 10 by 2-1/4 inch assemblies you would want the part # BP01-110. As bad as your assemblies sound you might just want to replace both assemblies. For the left hand side you would want the part # AKEBRK-35L-SA...
    view full answer...
  • Replacement Brakes For 2000 Coleman Utah Pop-Up Camper
    You did not say whether you have electric or hydraulic brakes on your 2000 Coleman Utah camper. You will need to know a few details when choosing replacement brake assemblies. There should be a plate or sticker on the axle with the weight rating. You will need both the left and right brakes that match the brakes you currently have. You will need to know the diameter and width of the brakes, and the mounting bolt pattern. I have attached a link to the 10-inch brakes you can check out. We...
    view full answer...
  • Accomplishing Initial Adjustment of Nev-R-Adjust Brake Assemblies
    Getting the Nev-r-adjust assembly initially set can be a bit challenging. I would recommend bolting the assembly in place and rotating the adjuster from the front before installing the hub. You can keep moving the shoes outward, until you can barely slip the drum into place. This will get you pretty close to the initial adjustment needed. If you need to make an additional fine adjustment one way or the other, you can force your brake adjustment tool in from behind the assembly past the...
    view full answer...
  • Replacement Hub, Drum and Brake Assembly Recommendation for 3,500 lb Dexter Axle on 2010 Jayco 24T
    The hub/drum you need is the part # 84546UC3 which is a 10 inch drum that matches the bearings you have and the wheel bolt pattern you need. For brake assemblies you then would want the part # 23-469 for the right hand side and part # 23-468 for the left hand side.
    view full answer...
  • Parts Needed to Add Electric Drum Brakes to 6 x 12 Single-Axle Trailer
    Adding electric drum brakes to your single-axle trailer requires a few components, including brake flanges, brakes, hub/drums, wiring, a breakaway kit and a brake controller. Each of these is detailed in the linked article which covers the entire process. Brake flanges must be welded on perfectly straight and concentric or you can have trailer tracking problems, premature tire wear or other issues. Specialized jigs are required. Since you have welding experience as long as you have the...
    view full answer...
  • Initial Adjustment of Dexter Nev-R-Adjust Electric Drum Brakes
    Dexter 10-Inch Nev-R-Adjust electric drum brakes # 23-468 and # 23-469 have a star wheel for initial adjustment, just like regular brakes do, but with these self-adjusting brakes you'll mount them and install your wheel/tire and then rotate the tire so that the internal mechanism can sense the pad tension and self-adjust accordingly. You do not want to set the tension high beforehand as the brake will not be able to release that tension. Please refer to the linked video that explains the...
    view full answer...
  • Self Adjusting Brake Assemblies to Replace TruRyde # TRBK10E02 and # TRBK10E01
    In order to replace your current TruRyde brake assemblies with a self adjusting system you could go with the Nev-R-Adjust Brake Assemblies, # 23-468 for Left Hand and # 23-469 for Right Hand. There isn't an option for converting the TruRyde brake assemblies. Since you mention that you are having trouble maintaining the adjustment of your current brake assemblies, it sounds like there could be an issue with one of the components such as the adjuster or adjuster spring. I recommend removing...
    view full answer...
    Image 1 for


< Previous



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video Edited:
Zack K
Employee Kathleen M
Video Edited:
Kathleen M
Employee Chris R
Video Edited:
Chris R
Employee Lindsey S
Updated by:
Lindsey S
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Robert C
Installed by:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.