10" x 1-1/2" Passenger's-side electric trailer brake assembly fits 3,000-lb axles. Mounting flange has a 4-bolt pattern. Fits 13" to 15" wheels.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this Dexter 10-inch right hand electric trailer brake assembly for 3000 pound axles. It does fit the four bolt brake mounting flanges. Now, electric brakes are easy to install. They offer more user control than hydraulic brakes, and they require only an electric brake controller, which we do sell separately.
There's no actuator hydraulic lines necessary.Now, this kit will include the 10 inch by 1 1/2 inch passenger side electric trailer brake assembly. If you notice the brake shoes, they are lined with an automotive grade friction material, and that friction material is fully bonded. It's not riveted to the shoes, so it gives you a lot longer life, more braking torque.Now, this brake is a manual adjustment brake, requires periodic adjustment. You adjust it with this wheel down here. As you turn this wheel, it will let your brake shoes go in and out.
So, you adjust get to your application. To adjust them, there's two holes in the back. What's nice is, in the holes, they do include these adjuster plugs. These adjuster plugs will cover these access holes, helps keep dirt and grime out of your brake assembly and off the brake shoes.We mentioned, you can see it fits the four bolt brake mounting flange bolt pattern. The mounting nuts are included to install it.
This is made in the USA. Dimension is a 10 inch by 1 1/2 inch. When they mentioned those dimensions, the 10 inch is the diameter. That's measured from this side all the way over to this side. There's your 10 inch diameter.
For 1 1/2 inches, that's the width of the pad on the brake shoe. There's your 1 1/2 inch measurement.The weight capacity on this brake assembly is 1500 pounds. When you use one of these with one on the other side, it'll meet the axle rating of 3000 pounds. This is designed to use 10 inch drums. The wheel size used on this is 13 inch up to 15 inch. These are electric brakes, so if you notice in the back, they have these two green wires that come out, they do need to be connected. One goes to the brake feed. The other one goes to the ground. They're both green wires, so either wire can be used for either function.This is a right hand passenger side assembly. The way you can tell that, when you get a new assembly, of course, there'll be a sticker on it. It'll indicate that. If the sticker isn't on there, the easiest way to tell, you should look at the length of the pad on the shoe. The pad on this shoe goes from here to here. On this one is a lot shorter, goes from here to here. The shorter shoe is the primary shoe, and the primary shoe will always face the front of the trailer when you install it. If it's installed like that, that'll tell you that this is the right hand side passenger side assembly.That should do it for the review on the Dexter 10 inch right hand electric trailer brake assembly for 3000 pound axles. It fits the four bolt brake mounting flanges.
Average Customer Rating: 4.9 out of 5 stars (20 Customer Reviews)
10" x 1-1/2" Passenger's-side electric trailer brake assembly fits 3,000-lb axles. Mounting flange has a 4-bolt pattern. Fits 13" to 15" wheels.Thanks to Nicole and the great customer service. I am a retired customer service/inside sales manager. I retired after 31 years of service with Sappi Fine Paper located in South Portland Me. I realize people are a companies number one asset. You have a great employee with Nicole. She was personable and made me feel that my business was important. I will do business with you in the future and would highly recommend your company. Thanks Nicole.
Ordered break assemblies for our travel trailer. The etrailer videos are great tools for replacing and adjusting. Great service, prices, and shipping. Wouldn't hesitate to order products again.
The first time experience with Etrailer has been good on stock availability. Delivery was met. Overall the communication with Etrailer was excellent. The install videos on the items were very useful. I definitely will look at Etrailer first for any future needs.
See review of left side… same applies here. Stellar option.
looks good so far i would like a discount need to order 1 moore
From the wiring to the backing plate, quality through out...
Just what I needed!! Perfect replacement part!
Exactly what I ordered and Great customer service
works perfectly
Got it earlier today and is already installed!! Awesome service. Thanks
Thank you
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.