Replacement Push Rod Assembly for Dexter Model 60 Brake Actuator
(34 reviews)
Price: $34.24
In Stock
Replacement Push Rod Assembly for Dexter Model 60 Brake Actuator
Item # T2346300
Our Price: $34.24
Orders above $99 qualify for Free Shipping
In Stock
- All Info
- Reviews (34)
- Q & A (0)
- Videos (1)
- Photos
- Why etrailer?
Dexter Accessories and Parts - T2346300
- Brake Actuator
- Push Rod
- Dexter
Replacement assembly fits Dexter Model 60 brake actuators.
Features:
- Fits Dexter Model 60 brake actuators
- Includes:
- Push rod
- Spring
- Washer
- Locknut: 5/16" diameter
- Spring guide assembly
- Made in USA
068-092-00 Dexter Axle Push Rod Assembly for Model 60 Actuators
Replaces Titan 2346300
Video of Replacement Push Rod Assembly for Dexter Model 60 Brake Actuator
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Titan Brake Actuator T2346300 Review
Today we're going to review part number T2346300. This is the Titan replacement push rod assembly for the Titan model 60 brake actuator. Now this assembly is designed to fit the Titan model 60 brake actuators. It includes the push rod, the spring, the washer, a lock nut, which is a 5/16 diameter lock nut, and the whole spring guide assembly. This part is made in the USA. Just to give you an idea of the overall length on this whole assembly, it's going to be right about 7-1/2".
But that should do it for the review on part number T2346300. This is the Titan replacement push rod assembly for the titan model 60 brake actuator.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Replacement Push Rod Assembly for Dexter Model 60 Brake Actuator - T2346300
Average Customer Rating: 4.9 out of 5 stars (34 Customer Reviews)
Replacement assembly fits Dexter Model 60 brake actuators.by: William05/18/2022
There was a loud clunk and you could feel it when using the surge brakes on our ski boat trailer. The master cylinder was badly pitted. Now the braking is smooth and responsive.
by: Tho11/28/2022
Top notch customer service. My item was lost in the mail (received a torn envelop), and it was replaced immediately.
by: Charles 10/30/2022
Fair price and quick delivery
by: Michael12/10/2020
I have been restoring the brakes on my 20 year old boat trailer. After replacing the master cylinder, hoses, and brake drum assemblies they still weren't working right. Looking at the picture of the actuator rod that fits into the master cylinder, I knew what I saw didn't look right. This push rod assembly is a moving functional part. There is a rod that slides in a sleeve. You can't compress it with your fingers because the spring is too strong. The assembly compresses to dampen the shock on the master cylinder. The OD of my original that fits in the master cylinder is 7/16", and the replacement is 7/16" as well. The original internal rod had completely rusted through. This part is not easily visible due to the surge unit cover. I am going to add lubricating the rod and sleeve under the spring as part of regular maintenance. I believe the Titan/Dico surge unit style has changed from 20 years ago, but luckily etrailer had this part in stock and shipped immediately. I received an email that detailed step by step processing with shipment tracking.
by: Jeffery05/11/2022
It works great
by: Harry05/19/2022
Perfect fit very fast shipping excellent customer service thank you
by: Jeff R02/23/2017
This push rod assembly works perfectly on my boat trailer! No issues and it was made well in my opinion.
Comments
After a year still working perfectly!
Jeff R - 02/23/2018by: Jerald03/14/2020
Fit my old car dolly that was not made anymore perfectly. Package was torn open during shipment but all small parts were safely put inside the master cylinder. All my Email questions were answered in a very timely manner. Thank you for your great product and exceptional service.
by: Jack 10/22/2021
Great service on a hard to find part r>Thanks
by: Tom R.07/06/2015
Great products and very fast service. The right parts at the right price.
by: Ron12/18/2017
Parts work great for the rebuild of my brake control.
by: Bill jr03/24/2017
Its the exact replacement perfect fit!
by: Garry 05/30/2021
I ordered the items express shipping on Memorial Day weekend and it got here THE NEXT DAY less than 18 hrs upon ordering you’ve gained a customer for life!
by: Gary09/02/2015
Great fit needed no adjustments! "Good shipping rate and speed"
by: Robert05/19/2018
Exact replacement for my 18 yr old one.
by: Robert05/25/2018
Great quality, just what I needed.
by: Mark07/25/2017
Everything we ordered worked as it should and we got the order quick. When I talked to the staff, I explained what I needed and they were so helpful.
by: Mark L07/15/2014
Perfect replacement.
by: Jw05/20/2021
Seems to work well time will tell.
by: Bob S.10/18/2012
Super fast shipping, great emails, AAA+ service. Thank You I will surely do business with your company again.
by: charles02/24/2017
nice product. ours was 27years and finally rusted thru. thank you will keep your company in mind for future purchases
by: Mike 04/09/2021
Seems to be well made
by: Jarrod05/19/2015
Replaced original rusted and bent push rod perfectly.
by: Rod08/03/2018
great service and fair prices - thanks
by: Randy 08/01/2021
25
34
Show More Reviews
See what our Experts say about this Dexter Accessories and Parts
- Replacement Push Rod Assembly for Titan Aero 6000 With Sticking Push RodFor your Titan Aero 6000 the push rod you will need is the Replacement Push Rod Assembly for Titan Model 60 Brake Actuator # T2346300. The Aero 6000 is the same as the Model 60 in the internal components. The sticking issue is likely a spring issue or guide assembly issue so you will want to replace it.
view full answer... - Replacement Shock and Push Rod for a Titan Model 60 Trailer Disc Brake ActuatorIt does sound like the shock is not returning. We do carry the part you need. It is Titan Shock Absorber for Model 60 Brake Actuators, # T2336200. If the Titan coupler you have is for disc brake applications and it were used on drum brake applications, the psi level would be too high. Also the brake lines and fittings normally used for drum brakes would not be large enough for disc brake applications. The push rod could also be in need of replacement. It is part # T2346300. When performing...
view full answer... - Replacement Master Cylinder and Push Rod for Titan Model 60 Brake ActuatorsThe replacement master cylinder kit for the Titan model 60 drum brake actuator is # T4395100. It comes with a new gasket, lid, cap, mounting hardware and fitting. I have linked a video review for you. The push rod, which is the part that pushes the fluid through, is not included. If you also need the push rod then you will need # T2346300.
view full answer... - Right Side Hydraulic Trailer Brake Locks Up After BrakingYou may be getting air in the lines or have a wheel cylinder that needs to be replaced. It is also possible that you have the wrong side brake assembly on that right side but since it is only an issue after braking this is probably not the case. There could be something in the brake assembly itself that is getting stuck. I recommend pulling the wheel and drum off to inspect the operation of the brakes, check for any foreign objects that might be causing the malfunction. If the wheel cylinder...
view full answer... - Replacement Master Cylinder, Shock and Push Rod Assembly for Dico Model 60 Drum Brake ActuatorDefinitely sorry to hear the actuator you got didn't work out, but at least you are able to get the replacement parts you need (I realize that's little consolation but better than having to chop off a welded actuator). You will need specific replacement parts as opposed to using the parts from the Demco actuator you have as actuators don't have universally fitting parts. You were right on with the part numbers you need for your Dico Model 60 actuator: - Replacement Master Cylinder Assembly...
view full answer... - Replacement Master Cylinder for Titan Aero 7500 Brake Actuating Coupler for Disc BrakesThe Replacement Master Cylinder Assembly for Titan Model 60 Brake Actuators - Disc # T4820000 is not the replacement you are seeking. Instead you will want the Replacement Master Cylinder for Titan Aero 7500 Brake Actuators - Disc # T4714200042 along with the Replacement Cover Gasket for Titan Aero 7500 Master Cylinders # DX37FR. You can reuse the old push rod or you can use the Replacement Push Rod Assembly for Titan Model 60 Brake Actuator # T2346300 if desired.
view full answer... - Replacement parts for a Titan Master Cylinder Drum Model 60While there is not a rebuild kit for the Titan Model 60 brake actuator, we do have several replacement parts available. Replacement Master Cylinder Assembly for Drum Brakes - part # T439510 Replacement Push Rod Assembly for Brake Actuator - part # T2346300 Shock Absorber for Model 60 Brake Actuator - part # T2336200 Replacement Breakaway Assembly - part # T4623800 Replacement Ball Latch Repair Kit - part # T4335800 Repair Kit for Leverlock Couplers - part # T4358400 Again, these...
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Written by:
Lindsey S
Installed by:
Jeff D
Updated by:
Wilson B
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.