bing tracking image
  1. Accessories and Parts
  2. Diamond
  3. Trailer Lights
  4. Load-Resistor Kit
Load Resistor Kit for LED Turn Signals - 50 Watts - 6 Ohm - Qty 2

Load Resistor Kit for LED Turn Signals - 50 Watts - 6 Ohm - Qty 2

Item # DI34ZR
lowest price pledge
Retail:$20.83
Our Price: $13.80
You Save: 34%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.19 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
These load resistors prevent hyperflashing on turn signals with LED light bulbs. Compact design - fits in tight spaces. 1-800-940-8924 to order Diamond accessories and parts part number DI34ZR or order online at etrailer.com. Free expert support on all Diamond products. Guaranteed Lowest Price and Fastest Shipping for Load Resistor Kit for LED Turn Signals - 50 Watts - 6 Ohm - Qty 2. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (6)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Diamond Accessories and Parts - DI34ZR

  • Trailer Lights
  • Load-Resistor Kit
  • Diamond

These load resistors prevent hyperflashing on turn signals with LED light bulbs. Compact design - fits in tight spaces.


Features:

  • Load resistors prevent hyperflashing on turn signals with LED bulbs
    • Work with most import and domestic vehicles
  • Compact design - fits in tight spaces
  • Compatible with 12V DC systems
  • Surface mounts behind vehicle headlights - hardware not included
  • Quick connect plugs easily connect to power source


Specs:

  • Quantity: 2 load resistors
  • Unit dimensions: 2" long x 1-1/4" wide x 11/16" tall
  • Distance between mounting holes (center on center): 1-1/8"
  • Electrical resistance: 6 Ohms
  • Wattage: 50 watts
  • 5-Year limited warranty


DG72638VP Diamond Group Load Resistor Kit - 50 Watts - 6 Ohm - 2 Pack





Video of Load Resistor Kit for LED Turn Signals - 50 Watts - 6 Ohm - Qty 2

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Diamond Lights - Load Resistors - DI34ZR

Jeff: Hello everybody, this is Jeff at etrailer.com. Today we're going to take a look at the 50 watt load resister kit for the LED turn signals. It is for a quantity of two resistors. Now these load resistors will prevent hyperflashing on your turn signals with LED bulbs. It's designed to work with most import and domestic vehicles. You can see they are a nice compact design.

They'll fit into tight spaces. These are compatible with 12 volt DC systems. They will surface mount behind your vehicle headlights and the connection plugs are included. The quick connect plugs, which will let you easily connect to your power source. A few specs again, it's two load resistors.

Wattage is 50 watts, electrical resistance is six ohms, and last thing I want to do is just give you dimensions on the resistor. The length on it, right at two inches long. The width, including the mounting brackets, it's right at one and a quarter inches wide. And the overall height of it is right at 11 16ths of an inch tall. But that should do it for the review on the 50 watt load resistor kit for the LED turn signals..


Customer Reviews

Load Resistor Kit for LED Turn Signals - 50 Watts - 6 Ohm - Qty 2 - DI34ZR

Average Customer Rating:  4.7 out of 5 stars   (6 Customer Reviews)

These load resistors prevent hyperflashing on turn signals with LED light bulbs. Compact design - fits in tight spaces.

by:

It was easy to install the resistor with quick connect clips, I wish there was some instructions with the packaging. I didn't know if it matters what side of resistor was connected to positive. I decided to just install them and fixed my hyper flashing the new led tail lights.



by:

This is the second set I ordered. I replaced all my lights on my Toyota with LED's and the hyper flash issue came to light. I knew a resistor would work but didn't know exactly what to get. I called and as usual, etrailer was extremely helpful. The customer service lady suggested what to purchase and I did. The resister set arrived early which was wonderful, however in packaging they pretty much weaken the wiring as they fold them over to get them in the clam shell. Both resisters look pretty frail and I fear the wires will break eventually. I went ahead and installed them and unfortunately they only fixed my hazard lights, turn signals still hyper flash. I ordered a second set to put one at each corner. The packaging was the exact same. GGGGRRR. I have not installed these yet but I hope they fix my problem and the wires do not break. The set is affordable but my only complaint about etrailer is the shipping. I have had instances where it's cheaper to keep product then to return it.



by:

Quick processing & shipment. Product was also packaged well.



by:



by:



by:


6
6

Ask the Experts about this Diamond Accessories and Parts



  • Do Diamond # DI34ZR Load Resistors Get Hot
    Load resistors can reach between 140-160 degrees Fahrenheit. Therefore, mounting them to a plastic surface wouldn't be a good idea. Mounting them to a metal surface is recommended.
    view full answer...
  • LED Light Bar Not Functioning Properly When Running Lights Are On
    Since you have a clean ground and the converter box, it sounds like the amperage of your running lights is just too high for the LED light bar. You may want to try using a load resistor like the Diamond LED Light Bulb Load-Resistors - Qty 2 # DI34ZR to see if that allows everything to function properly.
    view full answer...
  • Why Do LED Taillights on Vehicle Cause "Bulb Burned Out Message on Dash
    When you replace incandescent bulbs on a vehicle's turn signal circuit with LEDs the blinker circuit doesn't want to work right. This is due to the amperage rating being too low on the LEDs and thermal flasher units needing to see a specific amperage rating to work right. Now with some vehicles if the circuit doesn't see a specific amperage load on the circuit it thinks the bulb has burned out. The LEDs will cause this. A load resistor puts that same amperage back on the circuit so that...
    view full answer...
  • Aluminum Versus Ceramic Load Resistors for Replacing Incandescent Lights for LED Lights on RV
    Load resistors, such as # DI34ZR, will get hot as they do their job of absorbing power (providing resistance). They will work fine for helping a wiring harness work well with low-power-demand LED type trailer lighting. The difference between them is that the aluminum resistors will be able to more quickly dissipate that heat to the surrounding air. The aluminum housing will release it's heat better since the material itself is more conductive of heat than ceramic (which is really an insulator...
    view full answer...
  • Troubleshooting Replacement LED Lights on Trailer All Powering On with One Function Activated
    I reached out to my contact at Luma LEDs just to see if he might have any idea as to what might be causing the issue you described when replacing the incandescents on your trailer with new LED bulbs. He stated that since the LEDs will draw much less power than your old incandescent bulbs, the tow vehicle might be seeing the new bulb as being burnt out/not operational and this can cause a variety of issues with the visible functions on the lights. Adding load resistors like # DI34ZR inline...
    view full answer...
  • Troubleshooting Low Voltage to LED Tail Lights and Trailer Lights
    It is normal to get LED light function with the ACC mode on your ignition. The LED lights draw far less amperage than incandescent bulbs, so with any power going to the wires they can be illuminated. This is normal for your 1997 Ford F-450. If you do not want them to function in that ACC mode on your ignition and want them to function like the incandescent bulbs, then you will need to install load resistors like the Diamond LED Light Bulb Load-Resistors - Qty 2 # DI34ZR to require a...
    view full answer...
  • Troubleshooting 2005 Dodge Ram 1500 with Flashing/Flickering Fog Lights
    LED's sometimes will do a hyperflashing because they take less power than traditional incandescent bulbs. The way to fix this is to use load resistors like the Diamond LED Light Bulb Load-Resistors - Qty 2 # DI34ZR. This is what I recommend to solve your flashing issue on your 2005 Ram 1500's fog lights.
    view full answer...
  • Solution for Rapid Signal Flashing on Utility Bed with LED Lights
    It sounds like you may just need to install some load resistors on the turn signal circuits of your truck. The hyper flashing you are experiencing occurs sometimes with LED lights because they only draw a fraction of the power that a standard incandescent does. On vehicles with a bulb-out sensor, they are essentially tricked by this and think that a bulb has burned out, which in turn causes the rapid blinking. The same symptom occurs if you were to have incandescent bulbs and they were...
    view full answer...
  • Troubleshooting LED Trailer Lights Flashing with 2015 Chevy Silverado
    The first thing you will want to do is make sure you have a good ground for your new lights; oftentimes a poor ground can be the cause of lights acting erratically and this is going to be the most likely cause for your LED lights behaving in the manner they are. It is possible that load resistors # DI34ZR would fix the issue if you are certain your ground is not the problem. They will need to be installed on each circuit of the trailer wiring; the instructions included with this kit have...
    view full answer...
  • Troubleshooting LED Tail Light Bulbs Flickering when Vehicle Lights are Turned Off
    The flicker you are referring to with LED bulbs is known as hyper flashing. This occurs because the LED bulbs require so much less power than incandescent bulbs. So when your lights are on, the power to the bulbs is reduced due to the draw on the headlights and running lights, but when they are turned off the power is too great for proper function without adding load resistors. I recommend adding the Putco LED Light Bulb Load-Resistors - Aluminum - Qty 2 # DI34ZR to your wiring for each...
    view full answer...
  • Correcting Hyperflashing Taillights in 2009 BMW X5
    The Diamond LED Light Bulb Load-Resistors # DI34ZR are designed to fix the hyperflashing you are experiencing though they do need to be installed on the circuits of the affected lights. You are going to need to determine if those circuits are accessible in your 2009 BMW X5 to allow the resistors to work like in the diagram I've attached.
    view full answer...
    Image 1 for
  • Troubleshooting Trailer LED Lighting that Partially Illuminates When Connected to Tow Vehicle
    Since it only takes a tiny amount of voltage to illuminate an LED what you are seeing is normal. The tiny bit of voltage present on your trailer wiring harness is illuminating your LEDs slightly. What you can do is install load resistors on the circuits of your trailer that are dimly lit and the problem will go away. For that you would want the part # DI34ZR. My contact at Curt stated that the small amount of power will not drain the vehicle battery since it is much a minute amount of...
    view full answer...
  • Load Resistor Recommendation to Prevent LED Trailer Tail Lights Flicker
    Installing load resistors on the trailer's wiring like the # DI34ZR will prevent the flickering of the taillights if you wanted it to stop. If you can live with the flickering though there's no reason you'd have to do this. The flickering of the LEDs won't drain the battery and a free solution would be to just unplug the trailer wiring when not towing.
    view full answer...
  • Brake Light and Turn Signal Circuits Cause Error in Truck
    Your 2003 Dodge Ram should have a converter on the trailer wiring harness to combine the brake and turn signals on your truck's separate wiring to a combined 2-wire system. Since your truck thinks there is a bulb out on the trailer I'm guessing the you have LED bulbs. LEDs draw less power than incandescent bulbs so the truck may mistakenly recognize the low draw as a bad bulb. To solve this you can add load resistors # DI34ZR to the wiring. The load resistors which will add additional...
    view full answer...
  • Recommended Load Resistors For Trailer With LED Lights Causing Hyper-Flashing On 2013 Ford Escape
    We do not have a 4-way to 4-way adapter with the diodes that stop the hyper flashing. You can install load resistors like part # DI34ZR. You would install the load resistors on the affected circuits. I have attached a drawing that shows how the resistors should be installed.
    view full answer...
    Image 1 for
  • Troubleshooting 4-Way Motorcycle Trailer Wiring to 3 Wire LED Trailer Lights
    Since you have a 5 way on your bike, you obviously aren't using trailer brakes when you use the 4-way adapter, but the adapter isn't the issue. Your LED lights will have the brown as the running lights, the white as ground, and either the green or yellow depending on trailer side for both stop and turn. The issue may be that the LED's draw less power and you may need to add a load resistor inline like the Diamond LED Light Bulb Load-Resistors # DI34ZR on the green and yellow wires for...
    view full answer...
  • Is Load Resistor Required for Converting 3rd Brake Light to LED Bulb
    Load resistors can be required for LED lights when the vehicle wiring is unable to recognize the light's presence due to its very low power draw. Standard incandescent bulb lights draw more power and so they are more easily "seen" by the wiring harness. Load resistors like # DI34ZR drain away some power and so they mimic the characteristics of incandescent lights. You can try a load resistor to see if it corrects the blown fuse for your IOD display but usually it is only blinking lights...
    view full answer...
  • Are LED Load Resistors Needed For H13 LED Bulbs?
    Yes you are going to need load resistors like the Load Resistor Kit for LED Turn Signals # DI34ZR. An LED load resistor is needed for every LED light bulb in the turn circuit.
    view full answer...
  • 2021 GMC Sierra LED Turn Signals Are Hyperflashing
    It sounds like you have a common phenomenon known as "hyperflashing" occurring on your truck. The reason your LED lights are flashing is because the LED lights draw such little power that your turn signal relay sees the bulbs being out. The Load Resistor Kit # DI34ZR will mitigate this issue by installing these inline with your factory wiring. To correct your turn signals on your 2021 GMC Sierra 3500, I recommend installing the Load Resistor Kit for LED Turn Signals # DI34ZR.
    view full answer...
    Image 1 for
  • Do the Load Resistors in the Load Resistor Kit for LED Turn Signals Have + and - Markings
    No, there is not a positive (+) and negative (-) on the ends of the Load Resistor Kit for LED Turn Signals # DI34ZR. It does not matter which side connects to the positive and which to the ground. I have included a couple wiring diagrams you can check out to help with installation.
    view full answer...
    Image 1 for Image 2 for
  • How to Fix Rapid Turn Signal Flashing On a Vehicle
    It sounds like you may be experiencing a hyper flashing issue. This can occur if you add LED lights to a vehicle that normally uses incandescent lights. The fix is to use load resistors, like # DI34ZR, on the turn signal circuits. This extra bit of load will stop the hyper flashing from occurring.
    view full answer...
  • Will a Powered Trailer Wiring Harness on a 2006 Volvo V70 Affect the Bulb Out Sensor
    Installation of a powered converter like # 46255 should not affect the bulb out feature on your 2--6 Volvo V70. The harness is only getting input signals from the tail light wiring on the vehicle and the power is coming from the vehicle. The bulb out feature should still function normally. If the trailer has LED lights it is possible that the bulb out sensor could trip. If that happens you could install load resistors, # DI34ZR on the affected circuits on the trailer wiring. The load...
    view full answer...
  • Hyperflash On 2009 Ford Flex After Installing Trailer Wiring
    It sounds like you have a hyperflash condition with your 2009 Ford Flex. LED lights will flash like that because they do not provide enough power draw for the system to recognize them and the vehicle bulb-out sensor thinks there is a bulb out on the circuit. You should start by reinstalling the T-One to make certain all connections are seated properly and not causing the problem. If all of the connections are good and you have LED lights on your trailer, you may need Diamond LED Light...
    view full answer...
  • Load Resistor Recommendation for a Vehicle with LED Lights and Hyperflashing
    The hyperflashing you are experiencing is most likely related to the LED lights you have installed on your vehicle. LEDs are notorious for causing hyperflash when used on turn signal circuits of a vehicle. Typically installing load resistors on the circuit like the part # DI34ZR will fix the problem. To see how they install check out the picture I attached.
    view full answer...
    Image 1 for


< Previous
123. . .16



Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Daron K
Edited by:
Daron K
Employee Brian T
Written by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.