Replaces the circuit board in your Dometic Atwood water heater (GCH6A-10E, GC6AA-10E, GC10A-4E, or GCH10A-4E). Includes one circuit board with fuse and mounting screws.
Features:
Fits:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com and today we're gonna take a brief look at this replacement circuit board for the Dometic Atwood Water Heaters. This is going to replace the circuit board in your Dometic Atwood Water Heaters. And on your screen, I am including the model numbers of the water heaters that this circuit board is going to work with and fit. And this includes everything that you see here on the table before me. It includes obviously this circuit board with fuse, and you can see that fuse right here. Let me see if I can give you a little bit of a closer look at that in case you need to take a look at those connectors.
And you also are going to receive these two mounting screws that you see right here. And then this instruction sheet going over the replacement. And let me retrieve my ruler here and go over some measurements with you just to give you the further confidence that this is going to work for you. So looking at the overall length, we're sitting right at about 4-1/4", the overall width, we're sitting right at 3-3/8". And then the overall depth, at the deepest point here looks like we're sitting right at about 1-3/4" deep.
And then those mounting holes, center to center, see if I can line that up here for you. As you can see, it looks like we're sitting right at 4-7/8" on those mounting holes center to center. So this is directly from Dometic. And if you are looking to replace the circuit board in those water heaters with the model numbers that I shared with you at the beginning of our time together, this is going to be exactly what you need. Well, that's going to conclude our brief look today.
I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Average Customer Rating: 4.3 out of 5 stars (7 Customer Reviews)
Replaces the circuit board in your Dometic Atwood water heater (GCH6A-10E, GC6AA-10E, GC10A-4E, or GCH10A-4E). Includes one circuit board with fuse and mounting screws.The board would not work unless I modified the wiring harness at this price I should not have to do this so I am returning it thank you.
Worked beautifully as soon as it was all plugged in. Easy install and fast results.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.