bing tracking image
  1. Accessories and Parts
  2. Dometic
  3. RV Vents and Fans
  4. Roof Vent
  5. Upgrade Kits
  6. White
Dometic FanTastic Roof Vent Assembly Upgrade Kit - Clamp-on - Power Lift - 14-1/4"x14-1/4"
Dometic

Dometic FanTastic Roof Vent Assembly Upgrade Kit - Clamp-on - Power Lift - 14-1/4"x14-1/4"

Part Number: FV807357
In Stock
$211.82
Accessories and Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Upgrades your Dometic FanTastic roof vent to a motorized setup. Thermostat-controlled, clamp-on roof vent assembly kit has a rain sensor so the dome automatically closes. Includes powered lift and remote control. Motor and dome lid sold separately. 1-800-940-8924 to order Dometic accessories and parts part number FV807357 or order online at etrailer.com. Free expert support on all Dometic products. Great prices and Fastest Shipping for Dometic FanTastic Roof Vent Assembly Upgrade Kit - Clamp-on - Power Lift - 14-1/4"x14-1/4". Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (53)
  • Q & A (0)
  • Photos

Dometic Accessories and Parts - FV807357

  • RV Vents and Fans
  • Roof Vent
  • Upgrade Kits
  • Dometic
  • White

Upgrades your Dometic FanTastic roof vent to a motorized setup. Thermostat-controlled, clamp-on roof vent assembly kit has a rain sensor so the dome automatically closes. Includes powered lift and remote control. Motor and dome lid sold separately.


Features:

  • Upgrades your Dometic FanTastic roof vent to a motorized setup
    • Includes screen assembly, powered lift, and remote control
    • Motor and dome lid sold separately
  • Easy-to-use digital remote control provides convenient operation
    • Wall holder and 2 AA batteries included
  • Rain sensor signals dome (sold separately) to automatically close and fan (sold separately) to shut off when wet
    • Powered arm opens and closes hinged dome - no hand cranking needed
  • Knob on vent housing allows you to operate dome by hand in case of power failure
  • Pop-out screen keeps insects out and easily detaches for cleaning
  • Simple clamp-on installation and 2-wire design
    • Included hardware screws from bottom of vent so garnish clamps securely around the roof
  • Made in the USA


Specs:

  • Application: RV, camper, and trailer roofs up to 4" thick
    • Rough opening size: 14-1/4" x 14-1/4"
  • Warranty: 2-Year limited warranty


Note: This vent is compatible with FanTastic fans. It will not work with any other Dometic model fan.

This roof vent assembly kit uses a thermostat to help maintain an even temperature inside your RV, camper, or enclosed trailer. You can also control the dome (sold separately) and fan (sold separately) manually with a built-in hand knob or with the included remote control. A rain sensor is included as well to signal the dome to close and the fan to shut off when it gets wet.


Ceiling Vent and Fan with Remote-Controlled Thermostat

Fan Tastic Vent Remote Control

Air out your RV after cooking or just draw in some fresh air while you sleep. This remote controls the vent's thermostat as well as its manual and automatic speeds. You can control the direction of airflow - in or out - with the push of a button. Operate the remote control in your RV or place it in the included wall cradle so you will always know exactly where it is.


Manual and Automatic Operating Modes

This variable-speed ceiling fan operates in 2 modes: manual and automatic. An on/off button automatically lifts the dome (sold separately) and activates the fan. To use the manual mode, press the arrow buttons on the left side of the remote or turn the knob on the vent housing to increase or decrease the fan speed.


The manual speeds are listed on the remote from 10 percent to 100 percent. As you cycle through the speeds with the arrow buttons, an LED light next to the selected setting will light up. As you cycle, you may notice that the LEDs for 2 settings will be simultaneously lit. This means that the selected speed is the average of both of those settings.


To switch from the manual to the automatic, thermostat-controlled mode, press one of the temperature arrow buttons on the right side of the remote. When using the automatic mode, you can preset the vent to maintain a desired temperature inside your RV. The temperatures are listed from 60 F to 90 F. As you cycle through the temperatures with the arrow buttons, an LED light next to the selected temperature will light up. Again, when 2 temperature settings are simultaneously lit, the selected temperature is the average.


The fan's internal thermostat will sense the actual room temperature, and the fan will run until the preset temperature is achieved. When the temperature rises above the preset temperature, the fan will automatically kick on again. So when you go out, you don't have to waste energy by leaving the vent running at full blast just to ensure that your RV is cool when you return. And because the fan will activate anytime that the preset temperature is reached, you can set up the system to ensure that your pets remain comfortable while you're out.


Fan Tastic Vent Remote Control

To reverse the direction of airflow, simply push the air out/air in button while the dome (sold separately) is open.


Power Lift and Rain Sensor

Fan Tastic Vent Dome Lift

This vent has a powered lift arm for the dome (sold separately), so you don't have to manually crank it open or closed. The dome automatically opens when you turn on the fan. An up/down button on the remote also lets you open and close the dome when the fan is not running.


Fan Tastic Vent Dome Manual Lift Knob

And a hand knob is built in so that you can operate the dome in the event of a power failure.


A moisture sensor ensures that the dome will close when rain or snow hits. So you can leave the vent running or preset to run at a certain temperature, even if the forecast calls for rain. When the sensor gets wet, it signals the dome to close. With the dome closed, the fan blades will stop running. When the sensor dries, the dome will re-open and the fan blades will resume operation. To keep the sensor from activating in rain, snow, or humid and dewy conditions, simply add a vent cover (sold separately) to block moisture.


Installation

This vent requires a 14-1/4" x 14-1/4" opening in your trailer's roof and ceiling. To replace an old vent, install this vent into the existing opening. If your roof does not already have a vent, you will need to mark and cut an opening between roof joists to install this unit. And the 2-wire design makes it easy to have your vent hooked up and ready for use.



9108870598 Dometic Fan-Tastic Vent Series 7350 Clamp-On Trailer Roof Vent Assembly Upgrade Kit - Powered Lift Top - Clamp Style 14-1/4" x 14-1/4"

Replaces Fantastic Vent 807357

Installation Details FV807357 Installation instructions



Customer Satisfaction Score:


Customer Reviews

Dometic FanTastic Roof Vent Assembly Upgrade Kit - Clamp-on - Power Lift - 14-1/4"x14-1/4" - FV807357

Average Customer Rating:  4.6 out of 5 stars   (53 Customer Reviews)

Upgrades your Dometic FanTastic roof vent to a motorized setup. Thermostat-controlled, clamp-on roof vent assembly kit has a rain sensor so the dome automatically closes. Includes powered lift and remote control. Motor and dome lid sold separately.

by:

I ordered the correct upgrade kit to fit my existing Dometic 1450 fan (that was confirmed to fit by a call to Dometic) and after removing the existing unit I completed the wiring and installation. When I went to put the trim piece in place (last step) I found that I had installed the incorrect part, the model with the square corners instead of the one with the notched corners that I ordered and was in the images.

So it seems that Dometic put the wrong part in the box. The included screen was also dented and had one hole in it.

Because I needed to complete the install before leaving in my RV I clipped the corners and finished the installation. It works fine but does not look as good as it should.

MAKE SURE THAT YOU PART IS THE CORRECT ONE FOR YOUR EXISTING TRIM BEZEL BEFORE INSTALLATION.

Customer service said that they'd send me a label to send it back and after receiving it they would send me the correct part...there are only so many times that the installed base can have the screws installed & removed so I'll just have to live with it.

Also, instructions are not very good and don't include the information about removing the jumper if you have a pancake motor like I did.

Fortunately I knew about this ahead of time so the jumper was removed and the unit operates normally.



by:

Product fit and upgraded my non remote fantastic fan to one with remote. Shipping was quick. Box was smashed, but product ok and not etrailers fault. No instructions, but I was able to figure it out. Again - no 8nstructions not etrailers fault…just be ready to do some investigation.



by:

Production quality is very good. I ran into an issue that my fantastic fan (late 2010) would not work directly with the upgrade because my old unit was slightly smaller (14x14). I thought all fantastic fans were the same size (my mistake). I ended up moving the guts of the upgrade into my old assembly (less the new 14 1/4” x 14 1/4” shell) . All is working fine.



by:

Great upgrade kit will not work with my fold down Aliner camper because the manual lift knob interferes with the roof panels when fold down..



by:

I recently installed the Fan-Tastic vent assembly upgrade kit for my 2018 TaB 320 trailer. The upgrade process was relatively simple and took about 45 to 50 minutes to remove the original assembly and install the new one. I would recommend that you read the instructions a few times before starting your removal and installation process. It helped to mentally note on the new assembly each step referenced in the instructions.

The fan works great and the remote functions are straight forward. I really like the ability to set the fan at 10-20% speed without hearing fan noise. One drawback is that when you use the remote to operate the vent, it either opens it completely or closes it. If you want to run the fan with the vent lid partially closed, you have to do that manually.

Jamie from etrailer helped me ensure that I was purchasing the correct assembly for my trailer and helped expedite my purchase. I am extremely happy with my new upgrade and purchase experience with etrailer!



by:

The last two orders have processed and shipped in great time! That kind of service make my customers happy and it makes me look good in their eyes! Thanks for a job well done!



by:

Wow how fast was that! Item ordered, item shipped, got it in less time than I thought ! All in good shape, all parts needed in the box. Thank you !



by:

In 2014 I had upgraded one of three fantastic fans to operate with a remote. The remote control broke and was no longer available since Dometic had purchased Fantastic Fans and changed control boards and remotes. etrailer sent me the newer Dometic Fantastic fan upgrade with remote. Unfortunately, the unit shipped with a faulty control board. I tried to procure a replacement from Dometic but was unable to since they were out of stock and back ordered. However, etrailer came to the rescue and agreed to make the exchange. The new upgrade works better than the previous version in that the remote works from far greater distances. You can't go wrong purchasing from etrailer. They continue to meet and exceed with great customer support and communication.

Ken

12/20/2021

After a year the fans and remotes are working just fine. The new lid motors are about twice as fast as the old slower units. The lids open and close faster and seem quieter - maybe since they dont run as long. Thanks again etrailer!



by:

Very pleased with the upgrade kit, despite the fact that it arrived without any sort of installation manual in the box. This is likely not due to the seller, but more likely an oversight on packing from the manufacturer. An operation guide was included, but nothing about wiring. Thank goodness for [online videos] and others who posted how to connect everything. The fan works perfectly now and exactly as described. I'm super-pleased.

John S.

11/22/2021

Still working great no problems



by:

Perfect replacement for the house exhaust fan on 2005 Sandpiper 5th wheel trailer. The automatic rain sensor close and shutoff works great as well.

Dadster67

9/16/2021

Perfect, just as when installed. Remote is a nice feature



by:

Pro’s - Relatively easy upgrade with all the features of the latest Fantastic fan. Upgrade is all done inside, no roof work except to locate and install rain sensor with one screw. Roof seal is not disturbed. Minimal wire splicing required.

Con’s - Instructions are poorly written with tiny pictures of the area being discussed, they can be figured out but the poor instructions turn a 1/2 hour job into an hour plus, spent more time trying to understand the instructions than doing the actual work. Holder for the remote needs to be tighter or have a small clip to keep it in place. It was designed as though it was being hung in your house, not a trailer bouncing down the road. I modified mine so the remote won’t pop out during travel.

Glad I made the upgrade.

NOTE: BE SURE TO ORDER THE RIGHT VERSION THAT WORKS WITH YOUR EXISTING FAN. YOUR EXISTING FAN IS EITHER “CLAMPED IN”, OR “SCREWED IN”.



by:

I have been very satisfied with my fan-tactic roof vent upgrade kit vents. They were easy to install & work great. My wife loves them. She no longer has to get a step stool to manually open & close the vents - with the push of a button, they open or close. You can also control the speed of the fan. I would definitely recommend them! And the sales people at etrailer are the best - very helpful & knowledgeable.



by:

I have a 2020/21 Dometic Fantastic Fan 1450. I installed the upgrade kit and the new lift arm is not compatible. etrailer tech support was (uncharacteristically) not helpful - telling me that there must be a track on my lid for the ne arm and that I should look harder. Having checked with other owners of a 1450 fan of the same year, they have found the same issue. Once I replaced the original control arm it worked; however, for some strange reason, when turning on the main trailer power switch, the fan comes on by itself without the lid opening. Once you turn the fan off and back on using the remote, it works perfectly until you turn the main trailer power switch off and on again.
Both Dometic and etrailer could do better as many hours were spend needlessly working on this.



by: 04/28/2021

The product was fine - pretty much just what I needed. The service when I called etrailer was professional, courteous and prompt. The problem seems to lie in their systems. I had to order 9 times, the first 7 orders were rejected for card payment issues. At first they told me to call my credit card company. The credit card company told me they were approving the payment but etrailer was rejecting it. After a few more payment attempts and in a few more calls to etrailer, each of which was courteous and professional, I was told is was a "system problem" that they could do nothing about, but that I could try PayPal. Eventually I tried PayPal and the order went thru. It was delayed a few times, I had to reorder the item a few times and it was a huge hassle, but no one else had the fan so... what do you do.

When I got the fan it was fairly easy to install, but the lift arm for the fan lid did not fit so I had to use the old one. The instructions are xxx at least for my replacement, but you can figure it out with a little effort.

All in all it was a hassle to purchase but I'm happy now because everything works.

good luck!



by:

This kit is to convert a 3 speed fan, to a variable speed. It uses a fraction of the energy of the 3 speed, which is great for boondocking where power is limited. Also comes with power lift, remote, and rain sensor. Install took 30 minutes, including removal of old parts. Be sure to read all instructions before starting, there is a jumper on circuit board that either stays or is removed depending upon which fan motor you have. I also have a vent cover installed which prevents the hatch from completely opening. The automatic opener stops as soon as it hits limits and works fine. Great product and service from etrailer. Also note there seems to be two styles of this kit. One has notched corners, and the other does not. Be sure to verify which style you require. I installed on a NuCamp 2018 T@b 400, which had notched corners.



by:

The fan upgrade was easy to install and can be completely done from the inside. I did not have to get on the roof at all! I my case I did not need all of the parts in the kit but the kit does come complete with everything you will need EXCEPT for a crimp connector or two. The hardest part is installing the rain sensor from the inside as you cannot see it and do it by feel. Still easy just a bit of time.



by:

Purchased this Upgrade Kit primarily to repair an older unit that the circuit board had failed. Shipping was fast and the unit was easy to install following the included instructions, my older unit is now back up and running better than before.

Robert C.

1/11/2022

I live in my RV full time and after installing the upgrade kit a year ago the unit is still working flawlessly!



by:

Installed the upgrade in a 2020 T@B400. The installation was fairly straightforward but the instructions are not exceptional, read them a couple times and you will find answers to any questions you may run in to. The upgrade itself is great, using the remote is much easier than knobs on the old fan and the additional settings allow us to run the fan at a very low speed for venting with almost no noise. It is a great upgrade and you should not be afraid of the installation.



by:

Etrailer provided easy ordering, fast shipping, and immediate and useful help with a small issue. The fan is exactly what we needed to upgrade our existing roof vent to one with more speeds that uses a much smaller portion of our battery storage.



by:

Going to make using the fan so much eas ier



by:

The product is great, but I already knew that before ordering from doing research. What impresses me the most is e-trailer's customer service. Proactive communication on order status and follow through to ensure all is well with the order and product is rare these days, but e-trailer does it right! I will continue to use e-trailer for my RV needs.



by:

Awesome kit! Everything I needed to upgrade my existing fan. Installation was approximately 1 hour and everything worked the first time. I used the unit after the installation and was surprised that I really liked the thermostat control feature. The addition of the remote control was what I wanted most and was not disappointed!



by:

My rating is an expectation based on past experience. The product is from FanTastic, and their reputation is already very established. I am expecting the upgrade kit to be a good purchase and welcome addition. The "FIVE" star rating is for etrailer and their service. We've purchased from them in the past, and have never been unhappy. This upgrade kit was delivered several days in advance of my expectations. Thank you, etrailer!



by:

I purchased this product because the rain sensor on the existing vent fan failed and the water shorted out the circuit board. Could not get a reasonably priced replacement board. This product is not exactly the same as the original, but I was able to get it put back together with minimal frustration. Do Not forget about the jumper for the remote speed contour unit...



by:

Great upgrade for my manual 3 speed fan. Automatic open/close of the cover, better motor range, thermostat for temp control, and especially important to me - much lower power consumption at lower fan speeds.

The only issue I had was that the new arm for the cover did not fit the model of fan I have (2019). The good news is that the original one works just fine with the cover motor supplied.


25
53
Show More Reviews

See what our Experts say about this Dometic Accessories and Parts

  • Do You Carry Any Circuit Boards For a Dometic FanTastic Roof Vent Fan?
    The only circuit boards we carry for FanTastic vents are on the Upgrade Kits # FV807359 and # FV807357. We do not carry the circuit board as a separate item at this time.
    view full answer...
  • Does the Fan-Tastic Vent Upgrade # FV807357 Come with a Fan Blade?
    Since the Fan-Tastic Vent Roof Vent Upgrade # FV807357 is designed to work with Fan-Tastic vents with fans that are already installed, it does not come with the fan assembly with the kit. You would use the same fan from your Fan-Tastic Fan model 2000BTS-B and use it with the # FV807357 With that being said, if you need a full setup that includes the same rain sensor functionality with a powered lift, that is the Fan-Tastic Vent Roof Vent w/ 12V Fan and Thermostat - Powered Lift - 14-1/4"...
    view full answer...
  • Recommended Roof Vent Upgrade for a Fantastic Fan 6300 Fan
    There isn't an upgrade kit, unfortunately but we do have a unit upgrade that'll work great. The MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-04500K is a fantastic upgrade to your current unit, providing you with powered lifting arms so there won't be any manual cranking necessary, a remote control that can operate the unit from anywhere in the trailer, and has a rain sensor which will automatically close the lid when rain is detected.
    view full answer...
  • Fan-Tastic Roof Vent with Motor and Dome for 14 x 14 Trailer Roof Opening
    Fan-Tastic Vent part # FV807357 is a partial unassembled upgrade kit but we do have complete fully-assembled powered vents like this that will fit the same standard 14-1/4 x 14-1/4 RV roof vent opening. This kit is compatible with many but not all Fan-Tastic Vent models so it will be helpful to tell me the model number of your vent which you'll find on the motor. Please refer to the linked page to see all complete 12V powered vents like the Fan-Tastic Vent # FV807350. This USA-made unit...
    view full answer...
  • Recommended Replacement Vent Roof Vent Assembly for a Fan-Tastic Vent Model 6504w/414
    Functionally nothing at all. The difference between the Fan-Tastic Vent Roof Vent Assembly Upgrade Kit item # FV807357 and the Fan-Tastic Vent 7350 Series Upgrade Kit item # FV807359 is how they install. The item # FV807357 clamps securely around the garnish in the roof whereas the item # FV807359 goes around the garnish as well but also works with existing high/low style bases. Both vents have a rough opening size of 14-1/4" x 14-1/4". To replace your Fan-Tastic Vent Model 6504w/414...
    view full answer...
  • After Installing The Fan-Tastic Fan Upgrade Kit The Remote Wont Program
    I spoke with Dometic and they reccommend that you triple check that you have followed the instrucitons exactly they way they are as there is a jumper cable that is meant to be installed if you have the pancake style motor, and if left out you will experience exactly what you're experiencing. I have attached an image that shows this for you to check out. Additionally, you're going to want to verify that you have a 7350 series fan, as the upgrade kits # FV807359 & # FV807357 are designed...
    view full answer...
    Image 1 for
  • Recommended Replacement For A Fantastic Vent Model 4301
    There could be few reasons that your Fantastic Vent isn't working; a bad control board, lack of power, a bad motor, etc. I first recommend checking the power at the vent. If you aren't receiving 12v at vent it could be due to a blown fuse, loose/damaged wire, too small gauge of wire causing a voltage drop. Once you've ruled that out then your next options would be to replace the motor and/or the control board. The motor can be replaced with # FVK8017-00 but the control board is only able...
    view full answer...
  • Recommended Fan-Tastic Vent Roof Upgrade Kit For A 2020 Tiffin Wayfarer
    The main difference between The Fan-Tastic Vent Roof Vent Assembly Upgrade Kit - Clamp-on - Power Lift - 14-1/4 inch x14-1/4 inch # FV807357 and The Fan-Tastic Vent 7350 Series Upgrade Kit - High/Low Style Base - White # FV807359 is how it mounts in the trailer. The # FV807357 clamps securely around the garnish in the roof. The # FV807359 goes around the garnish as well but works with existing high/low style bases. Both vents have a rough opening size of 14-1/4 inch x 14-1/4 inch. Depending...
    view full answer...
  • What is the Difference Between Fan-Tastic Upgrade Kit FV807357 and FV807359
    The only difference I'm seeing between the Fan-Tastic Vent Roof Vent Assembly Upgrade Kit # FV807357 and Kit # FV807359 is that the 57 has small cutouts at the corners while the 59 has squared corners. Aside from that these are both labeled to work with the 7350 series vents so you'll want to check your style to see which is the exact fit. Attached are review videos for you to check out.
    view full answer...
  • Availability of Fan-Tastic Vent 7350 Series Upgrade Kit
    We do carry the Fan-Tastic Vent 7350 Series Upgrade Kit # FV807359 that you are looking for! It was temporarily deactivated but we confirmed it is a good part number and still supported by Fan-Tastic Vent in part thanks to your question!
    view full answer...
  • Does The Fan-Tastic Roof Vent Assembly Upgrade Kit Install Inside Or Outside The RV?
    The Fan-Tastic Vent Roof Vent Assembly Upgrade Kit # FV807357 installs to the garnish that is already installed, which is what clamps to the roof opening inside the RV. You will need to remove the ceiling garnish first to be able to access the roof vent assembly.
    view full answer...
  • Difference Between Fantastic Fan Upgrade Kits FV807357 and FV807359
    The big difference is the corners of the main panel of the # FV807357 are cut out with small section to allow access to mounting hardware and the # FV807359 instead does not have this area cut out. So you'd want to look at your vents to see if you need the cutouts or not.
    view full answer...
  • Availability of Replacement Control Board for Fantastic Vent
    If you have the clamp-on style, you need the Fan-Tastic Vent Roof Vent Assembly Upgrade Kit # FV807357. If you have the high or low style base you want the # FV807359. The upgrade kit includes the control board and is the only way to replace it since it is not sold separately. This will also give you an additional screen assembly, powered lift, and remote control. Since you are already replacing quite a few parts, it might be a good idea to just replace the entire fan. The Fan-Tastic Vent...
    view full answer...
  • Solution for Fan-Tastic Roof Vent that Stopped Working with Remote
    Sounds like there an issue with the circuit board of your Fan-Tastic roof vent which is preventing the remote from working. The only way to replace that on your 7350 is going to be with the part # FV807357 which comes with basically an all new inner assembly plus a new remote and motor.
    view full answer...
  • Can I Upgrade My Dometic Fan-Tastic Vent With The Fan-Tastic Vent 7350 Series Upgrade
    I was unable to find any information on your fan via the part number you provided. However, f you have a Fan-Tastic Vent 730 Seiries roof vent, the Fan-Tastic Vent 7350 Series Upgrade Kit - High/Low Style Base - White, part # FV807359, is compatible with your fan, provided your Fan-Tastic Vent does not have the cutouts at the corners of the vents. If you have the cutouts you will need the Fan-Tastic Vent Roof Vent Assembly Upgrade Kit - Clamp-on - Power Lift - 14-1/4"x14-1/4", part # FV807357....
    view full answer...
  • Difference Between the Fan-Tastic Vent 7350 #807350 and the Upgrade kit #807357
    The Fan-Tastic Vent Roof Vent w/ 12V Fan and Remote part # FV807350 is a complete assembly that will completely replace an existing vent. The Fan-Tastic Vent Roof Vent Assembly Upgrade Kit part # FV807357 is designed as an add on to existing vents. The add on while not identical does give you the auto or manual setting and in manual you can choose between 7 fan speeds. The complete assembly has more options than what the stock photo shows on the remote.
    view full answer...
  • Replacement Bathroom Vent for 2019 Lance 2185 Travel Trailer
    The # FV807357 Fan-Tastic Vent Roof Vent Assembly Upgrade Kit will work for your 2019 Lance 2185 Travel Trailer if the opening meets the requirements. In order to install this vent, you must have a 14-1/4" x 14-1/4" opening approximately in the trailer's roof and ceiling and the roof can be no more than 4" thick. These are standard dimensions for a vent opening. If this does not work for you please send measurements and I will do my best to find a solution. I have attached a review of...
    view full answer...
  • Troubleshooting Wall Switch Not Activating Powered Lift Or Fan When Turned On
    For the vent on your 2015 American Coach Eagle 45N, I would start by checking the fuse by the control knob on the fan. Check your switch to make sure it has not gone bad. This can be done by removing the power and ground from the back of the switch and connecting them directly to a 12v power source. If that doesn't work then it is most likely the board. In order to replace the board you would have to use the Fan-Tastic Vent 7350 Series Upgrade Kit Item # FV807359. Keep in mind this is for...
    view full answer...
  • Does Fan-Tastic Vent Upgrade Assembly 7350 Fit Fan-Tastic 1200 Series Vent
    I have some good news for your wallet because I reached out to the manufacturer, Dometic, who told me you can upgrade your 2250 Series Fan-Tastic Vent Roof Vent # FV802250 with the Fan-Tastic Vent Roof Vent Assembly Upgrade Kit # FV807357 to get the same motorized assembly with remote that you would get with a whole new vent. In regards to the covers, the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # FVU1500WH is going to fit on top of your Airstream. They are only 23 inches long...
    view full answer...
  • Replacement Roof Vent for 1999 Newman London Wire
    The # FV807357 is an upgrade kit designed to upgrade a manual lift Fan-Tastic Vent to a motorized setup. For a complete replacement I recommend the Fan-Tastic Vent Roof Vent w/ 12V Fan and Remote # FV807350. This vent features a variable-speed fan and powered lift. The rain sensor will signal the dome to close and shut the fan off when wet and resume when dry. It uses a powered arm to open and close so no hand cranking is needed. If you would rather have the manual lift the # FV802250...
    view full answer...
  • Solution for Fan-Tastic Roof Vent 2000 BTS-B that Has Broken Motor Mount
    Your Fan-Tastic roof vent is old enough that we don't have the individual part you are looking for so the best option we have would be the Fan-Tastic Vent Roof Vent Assembly Upgrade # FV807357 which would replace what you have with the current Fan-Tastic powered lift setup with a fan.
    view full answer...
  • How Does Fan-Tastic Vent Upgrade kit part # FV807357 Install
    The included hardware of the Fan-Tastic Vent Upgrade kit part # FV807357 that you referenced does screw to the garnish that's already installed which is what clamps to the roof opening. While online install instructions aren't available it's basically just a matter of using the included hardware to lower the inner section of the vent assembly and then replacing it with this after making a few wiring connections. Printed instructions to come with this though.
    view full answer...
  • Wiring Schematic For The Fan-Tastic Vent Part # FV801200 Availability
    Unfortunately we do not have a wiring diagram for the Fan-Tastic Vent Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" x 14-1/4" # FV801200 but we do offer the Fan-Tastic Vent Roof Vent Assembly Upgrade Kit - Clamp-on - Power Lift - 14-1/4"x14-1/4" # FV807357 which will clamp onto your current vent and basically replace the internal components and give you a new powered fan without having the remove the body of the vent.
    view full answer...
  • Replacement For Fan-Tastic Vent 8504-414
    The Fan-Tastic Vent Roof Vent Assembly Upgrade Kit # FV807357 is not a replacement part, it is simply designed to give a manual fan a motorized set up and won't work as a replacement. Your current fan doesn't have replacement parts for the wired connection due to its age so the only option I can tell you will work is a replacement. You can go with a powered vent with a remote or without; the Fan-Tastic Vent Roof Vent w/ 12V Fan and Remote - Powered Lift # FV807350 or Fan-Tastic Vent Roof...
    view full answer...


< Previous
12



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Kathleen M
Installed by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Michael B
Updated by:
Michael B
Employee Noah M
Updated by:
Noah M
Employee Kim H
Updated by:
Kim H
Employee Amanda M
Edited by:
Amanda M
Employee Halie H
Written by:
Halie H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.