Fastener Kit for Ford Trucks

See what our Experts say about this Draw-Tite Accessories and Parts

• Bolt Size for Draw-Tite Fastener Kit for Ford Trucks
  The Fastener Kit for Ford Trucks # 01685 comes with 1/2" carriage bolts.
  view full answer...
• Recommended Trailer Hitch for 1994 Ford F-150 with Deep Drop Bumper
  For your 1994 Ford F-150 with the deep drop bumper, I recommend the Draw-Tite Max-E-Loader Trailer Hitch Receiver # 41504. This Class III hitch is confirmed to fit your truck and features a towing capacity of 5,000 pounds. The installation process for this hitch is a bit easier compared to the other models also confirmed to fit your F-150. I have attached the complete installation instructions that you can take a look at as well. You will also need to add the Fastener Kit # 01685, which...
  view full answer...
• Replacement Hardware for a Trailer Hitch on a 2004 Ford Ranger
  You will actually need # RHK if the hitch on your 2004 Ford Ranger is an aftermarket hitch. Enter the hitch number and manufacturer on the RHK page to get the right hardware. Hardware kit # 01685 was designed for specific aftermarket trailer hitches for 1980 to 1997 Ford F-Series.
  view full answer...
• How To Order Replacement Trailer Hitch Receiver Mounting Hardware For 2005 Ford F-150 XL
  The Fastener Kit for Ford Trucks # 01685 only works with specific hitches on the 1980-1997 Ford F-Series Trucks. For replacement trailer hitch receiver hardware for your 2005 Ford F-150 XL you will need to use # RHK instead. On your trailer hitch receiver there will be the brand (Draw-Tite, Curt ETC) and a 5 digit number which is the hitch item number. You will need to enter the hitch item number, and select the manufacturer from the drop down menu. I included a video of the # RHK for...
  view full answer...
• Hitch Hardware Replacement Recommendation for 1994 Ford Ranger
  You will need the part number # RHK actually. On the product page for it you will need to select the manufacturer of the hitch as Draw Tite and enter the part # 75082 and we will ship you out the correct install hardware. The part # 01685 would not fit hitches for a Ford Ranger.
  view full answer...
• Recommended Replacement Hardware Kit
  That would make a lot more sense for carriage bolts. The Draw-Tite Hitch item # 41504, that the item # 01685 is for, comes with square holed spacer plates. The best option for ordering replacement hardware is the Replacement Hardware Kit item # RHK. You will go to the product page and select the manufacturer and enter in your hitch's item number and get the correct hardware and spacers you will need to complete your install.
  view full answer...
• Trailer Hitch Needed for a 1997 Ford F-350 Heavy Duty with a Deep Drop Bumper
  The Curt 3-Piece Trailer Hitch Receiver # C15511 that you referenced is a great option for the deep drop bumper on your 1997 Ford F-350 Heavy Duty. The Draw-Tite # 41504 is a little more cost-effective but it also requires the use of the adapter kit # 01685 and it doesn't have as high of a weight rating. We do have a selection of camper tie-downs that you can install on your F-350. If you let me know what the size of your truck bed is and if you have a board or step I can make a recommendation...
  view full answer...
  
• Will Draw-Tite Trailer Hitch # 75038 Fit a 1989 Ford F-150 Regular Cab, Short Bed
  If your 1989 Ford F-150 has a standard or step bumper AND the frame measures 37-1/4 inches from left to right (outside to outside) then you can use trailer hitch # 75038. If your truck has the deep drop bumper then you will need # 41504 with adapter # 01685. I have linked instructions for each of these hitches for you. If you plan on doing some towing I also recommend etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball set, hitch pin with clip, and a storage...
  view full answer...
• Recommended Trailer Hitch for Deep Drop Bumper and Ball Mount for 1996 Ford F-250 Crew Cab Diesel
  The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13038 is not a fit for your 1996 Ford F-250. For a similar fit, I recommend the Draw-Tite Max-E-Loader Trailer Hitch Receiver # 41504 which is rated for 5,000 lbs without weight distribution or 10,000 lbs with weight distribution. For your 2-5/16 inch hitch ball, I recommend the Curt Adjustable Ball Mount # C45900 which is adjustable so you can tow level with the 2-5/16 inch diameter hitch ball.
  view full answer...
  
• Trailer Hitch Fit for 1997 Ford F-350 with 10-Inch Deep Drop Bumper
  My contact at Draw-Tite advised that for your 1997 Ford F-350 with 10-Inch deep drop bumper the correct hitch fit is part # 41504. Along with it you will need Fastener Kit # 01685. My contact at Draw-Tite confirmed this hitch will fit your F-350's frame. For a 4-pole wiring harness you can use part # 118316. You'll also need a ball mount like # C45341, hitch ball and a pin/clip or lock. The linked article and product page will help you select the correct ball mount to keep your hitched...
  view full answer...
  

Do you have a question about this Accessories and Part?