bing tracking image
  1. Accessories and Parts
  2. Draw-Tite
  3. Heavy Duty Receiver Hitch
  4. Brackets
7" Weld-On Bracket Kit for Draw-Tite Class V Ultra Frame Service Body Trailer Hitch

7" Weld-On Bracket Kit for Draw-Tite Class V Ultra Frame Service Body Trailer Hitch

Item # 4907
Retail:$82.58
Our Price: $59.92
You Save: 27%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 12 lbs
Quantity: 
In Stock
Accessories and Parts 4907 - Brackets - Draw-Tite
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Universal weld-on brackets allow installation of your Draw-Tite Class V Ultra Frame service body trailer hitch cross tube to the frame of your heavy-duty or commercial vehicle. Each bracket measures 7" in height. 1-800-940-8924 to order Draw-Tite accessories and parts part number 4907 or order online at etrailer.com. Free expert support on all Draw-Tite products. Great prices and Fastest Shipping for 7" Weld-On Bracket Kit for Draw-Tite Class V Ultra Frame Service Body Trailer Hitch. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (5)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Draw-Tite Accessories and Parts - 4907

  • Heavy Duty Receiver Hitch
  • Brackets
  • Draw-Tite

Universal weld-on brackets allow installation of your Draw-Tite Class V Ultra Frame service body trailer hitch cross tube to the frame of your heavy-duty or commercial vehicle. Each bracket measures 7" in height.


Features:

  • Universal brackets let you mount your trailer hitch cross tube to the frame of your heavy-duty or commercial vehicle
    • Required for installation of Draw-Tite Class V Ultra Frame service body trailer hitch (41990 or 41991)
  • Weld-on installation
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish resists corrosion
  • Limited lifetime warranty


4907 Dimensions

4907 Weld On Bracket Kit for Class 5 Service Body Trailer Hitch Receiver - 7"




California residents: click here


Video of 7" Weld-On Bracket Kit for Draw-Tite Class V Ultra Frame Service Body Trailer Hitch

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Draw-Tite Heavy Duty Receiver Hitch - Mounting Brackets - 4907

Hello everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at the seven inch mounting bracket kit for the Draw-Tite class V service body trailer hitches. Now, these are universal mounting brackets that'll let you mount the trailer hitch cross tube to the frame of your heavy-duty or commercial vehicle. These brackets are required for installation of either the Draw-Tite class V service body hitch. Part number 41990 or part number 41991.

Both of those we do sell separately on our website. And I just wanted to show you the picture of there's what the cross tube looks like with the hitch receiver in the middle. Now, I did mention two part numbers. The difference in those two part numbers are just the length of the tube. One, it's 44 inches long.

The other is 66 inches long. And as I mentioned, we do carry both of those on our website. Now, these brackets are designed to install to the vehicle. They are either a weld-on, or you can see the holes for a bolt-on installation. And again, another insert just to show you what the cross tube looks like with these brackets installed.

Basically, the bracket right here has a square opening on it that'll slide onto each end of the hitch cross tube. And then you slide it along the tube and adjust it to fit the frame width that's needed for your application. And then it's welded onto the cross tube. And then after the brackets are welded on them, then you can either bolt on or weld on the brackets and cross tube to your vehicle's frame. Now, once these are installed, the center of the hitch receiver opening will be about seven inches from the top of the vehicle's frame rail.

Basically, when you install these brackets, this top here will be right at the top of the vehicle's frame rail and the hitch tube will be in here. So, if you measure from the top here down to the center, let me just show you, it should get you about seven inches. That's your seven inch drop. Now, these are a nice, black powder coat finish over an e-coat base to help resist corrosion. Has two plates, one for each side. Measurements on the plates themself, we measure the width from here to here. You can see it's gonna be right at nine inches wide. And the overall height from the very bottom of the plate to the top of the plate is about 9 1/2 inches tall. But that should do it for the review on the seven inch mounting bracket kit for the Draw-Tite class V service body trailer hitches..

Customer Satisfaction Score:


Customer Reviews

7" Weld-On Bracket Kit for Draw-Tite Class V Ultra Frame Service Body Trailer Hitch - 4907

Average Customer Rating:  5.0 out of 5 stars   (5 Customer Reviews)

Universal weld-on brackets allow installation of your Draw-Tite Class V Ultra Frame service body trailer hitch cross tube to the frame of your heavy-duty or commercial vehicle. Each bracket measures 7" in height.

by:

Defiantly looks like a great product! I’m using it for more than just a trailer hitch, so hopefully it will work. But I can’t say enough for the help I got from the staff, especially Jamie B !




by:

Just what I was looking for




by:

Great product. But even better Sevice from etrailer as usual. Always a great buying experience.




by:

1954 3100 Chevrolet. Ya just aren't going to get a hitch at Walmart for this truck. This is an awesome solution! Ya have to be able to weld but the end result is great! Thanks George!




by:



5
5

See what our Experts say about this Draw-Tite Accessories and Parts

  • Trailer Hitch Option for Mitsubishi Fuso Truck
    The Draw-Tite # 41990 would be a good choice for your truck pictured, as long as the outside to outside distance between the frame members isn't greater than 44 inches. You'll also need a weld-on bracket kit like part # 4907, which would give you a 7 inch drop from the underside of the truck frame members to the underside of the receiver tube.
    view full answer...
    Image 1 for
  • Approximate Cost for Weld-On Hitch Installation By Professional Certified Welder
    To install the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube # 41990 along with brackets like # 4907 will roughly take between 3 and 5 hours for prep, welding, and painting to seal the metal. There are many different hourly rates depending on the shop but in general, a shop cost will be somewhere between 65 and 125 dollars an hour. I recommend shopping around for the best local price and reputation. If you have a certified welder outside of a shop with the proper equipment,...
    view full answer...
  • Possible Hitch Solution for Mitsubishi Fuso Truck
    The part # 41990 and brackets # 4907 are a universal fit style of hitch that could be made to fit your Mitsubishi Fuso potentially. Since it's never been tested on your vehicle we have no idea what it would take to make the hitch fit but we do know it could work. These parts are basically the foundation for a custom fabricated solution. Beyond that you'd want to find a qualified fabricator in your area who can complete the install.
    view full answer...
  • Can the Class IV Weld-On Ultra Frame Trailer Hitch be Used on a 1987 Isuzu Pickup
    The Class IV Weld-On Ultra Frame Trailer Hitch Receiver by Draw-Tite, Hidden Hitch and Reese, item # 41990, is a weld on application and it is possible that the hitch could work on your vehicle. You would need to measure the width of your vehicle frame and consult a qualified Weldor to determine if the frame on your vehicle is strong enough to weld the hitch to. He will also need to determine if the frame configuration will accept the hitch in the proper orientation for towing. Along with...
    view full answer...
  • What Class IV Hitch Is Recommended For 1995 F350 Flatbed With 4 Inch Channel ICC Rear Bumper
    You will need to measure the distance between your frame rails and how far below the frame you will need the hitch to sit. The Draw-Tite Specialty Class IV Trailer Hitch, # 41990, is a 44 inch long hitch with a 3 inch square tube. It measures 7-1/2 inches from the back of the hitch to the front of the receiver. It is a weld-on installation. If you need to lower the hitch I have the Draw-Tite 7 Inch Weld-on Bracket Kit, # 4907, which will allow the hitch to sit 7 inches below the frame...
    view full answer...
  • Availability of a Receiver Hitch for a 1964 Dodge D-100 Pick-Up
    I checked with all three of the hitch manufacturers that we do business with and they do not produce a custom fit hitch for the 1964 D-100 Dodge pick-up. Your best option would be to measure down from the frame and determine how low the hitch needs to sit to clear the bumper and then use a weld on hitch with the proper size brackets. We have the Class IV Weld-On Ultra Frame Trailer Hitch Receiver, item # 41990, that can be used with either the 7 inch Weld-on Bracket Kit for Class IV Ultra...
    view full answer...
  • Trailer Hitch for 2019 Fort Transit T350 Cutaway
    Since you have a 2019 Ford Transit T350 with a cutaway chassis, you will need a universal fit hitch which you will need the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube # 41990, which is 44 inches wide. You will then need to add brackets to weld the hitch on, either the 7" Weld-On Bracket Kit # 4907 or 16" Weld-On Bracket Kit # 4916. To determine which brackets you need, simply measure from the top of the frame on your T350 to the bottom of the bumper. If you need less than...
    view full answer...
    Image 1 for
  • Trailer Hitch Compatible with Liftgate Truck
    We have many hitch options for a truck that has a lift gate, but very few of them are a simple bolt on custom application. Because the locations for attaching lift gates vary, you will need to use a weld on option like the Class V Universal Weld-on Receiver Hitch # 15903. There are many different bracket options for a hitch like # 4907 and # 4916.
    view full answer...
  • Knapheide Service Body Trailer Hitch Solution
    The only styles of hitches that can be made to fit a service body truck like yours are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916. The rear ends on service bodies are all different dimensions so there's no way to have a hitch fit that works well with that vehicle configuration.
    view full answer...
  • Trailer Hitch for 1960 Chevy With 42-1/2 Inch Frame
    While we have an option for you, there are no trailer hitch receivers that are a direct custom fit for your 1960 Chevy C10 truck. So that means you would need a universal fitting hitch; you would need to start with the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube # 41990. You will then be able to use one of two brackets: - 7" Weld-On Bracket Kit # 4907 - 16" Weld-On Bracket Kit # 4916 To determine which bracket kit you need, measure from the top of the frame on your bus...
    view full answer...
  • Recommended Class III Hitch for 2009 Ford E-450 Chassis Bus
    I have a solution for you, but there is not a Class III custom fit hitch available for a 2009 Ford E-450 Bus chassis and the 7" Weld on Bracket Kit # 4907 with the Draw-Tite Ultra Frame Service Body Hitch # 41990 is a Class V hitch- so it's not exactly what you're seeking. Instead, you can use the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703, which is a Class III hitch that will fit on box frame, I-frame or C-frames between 22" and 72" wide. This hitch can either...
    view full answer...
  • High Capacity Hitch that Can Fit Service Body Hitch
    The only styles of hitches that can be made to fit a service body truck like yours are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916. The rear ends on service bodies are all different dimensions so there's no way to have a hitch fit that works well with that vehicle configuration.
    view full answer...
  • Hitch for a 2002 Thomas School Bus SafeTLiner HDX With Rear Engine
    There is a way for you to add a trailer hitch to your 2002 Thomas Saf-T-Liner bus. Although there are none mounted vertically onto the frame, they will use brackets to mount to the frame which can be bolted or welded on. What you need is the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube # 41990 so long as your bus has a frame which is up to 44" wide, because that is the length of this cross-tube. You will then use either the 7" Bracket Kit or 16" Bracket Kit. To determine...
    view full answer...
  • Availability of Higher Capacity Universal Style Trailer Hitch
    We have the part # 41990 which is the main crosstube of a Class V hitch that you can use the part # 4916 for a 16 inch drop bracket or the # 4907 for a 7 inch drop bracket. The main crosstube of this is 44 inches long too so you might want to compare that to the area you want to install the hitch to see how well that would fit.
    view full answer...
  • How to Determine if 7 or 16 Weld-On Trailer Hitch Brackets Will Fit 2006 Ford E-350 Service Body
    When installing the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube # 41990 on your 2006 Ford E-350 with the service body it is really just a matter of determining what will fit and if both do which one will fit better. I have attached photos with dimensions for both the 7" # 4907 and 16" # 4916 weld-on brackets that you can check out. You can use these to compare them with your vehicle and determine which brackets are better for your application.
    view full answer...
    Image 1 for Image 2 for
  • Can Draw-Tite Service Body Trailer Hitch Cross Tube # 41990 be Installed Upside Down
    Yes, you can install the Draw-Tite Ultra Frame Service Body Trailer Hitch # 41990 upside down. I spoke with my contact at Draw-Tite and he said that the top and bottom portions of the crosstube are identical in terms of construction/steel thickness so this won't be an issue at all. You will just want to make sure that with it mounted in this orientation on your vehicle that you will still have access to the safety chain loops so you can easily attach the chains. This heavy-duty weld-on...
    view full answer...
  • Trailer Hitch Fit For School Bus
    The best option for a trailer hitch for your 2003 International School Bus is the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube # 41990 (44" wide) with either 7" Weld-On Bracket Kit # 4907 or 16" Weld-On Bracket Kit # 4916. To determine which bracket kit you need, measure from the top of the frame on your bus to the bottom of the bumper. If you need less than 5-9/16" to clear the bumper you will use 7" brackets # 4907; if you need less than 14-3/8" you will use the 16" brackets...
    view full answer...
    Image 1 for
  • How to Determine Correct Brackets for Draw-Tite Service Body Trailer Hitch
    In order to determine the brackets that may work for the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube - Class V - 2" # 41990 (44" wide) you are going to need to measure to determine if you need the 7" Weld-On Bracket Kit # 4907 or 16" Weld-On Bracket Kit # 4916 because this hitch is not designed for one specific vehicle like your Suburban. Simply measure from the top of the frame on your '75 Suburban to the bottom of the bumper. If you need less than 5-9/16" to clear the...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch for 2002 Ford E-450 School Bus
    The best solution for your E-450 bus will be with a weld-on trailer hitch like the Draw-Tite Ultra Frame # 41990 with the 7 inch Brackets # 4907 or the 16 inch # 4916 for an even larger drop. This type of hitch provides both the capacity and versatility needed for this kind of installation, since you will be able to attach it anywhere on the frame. This works well for school buses like yours since the bumper overhang is likely well over the standard chassis design, making custom frame-mounted...
    view full answer...
  • Trailer Hitch for 2002 Thomas Saf-T-Liner Bus
    There is a way for you to add a trailer hitch to your 2002 Thomas Saf-T-Liner bus although there are none mounted vertically onto the frame, they will use brackets to mount to the frame which can be bolted or welded on. What you need is the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube # 41990 so long as your bus has a frame which is up to 44" wide, because that is the length of this crosstube. You will then use either the 7" Bracket Kit or 16" Bracket Kit. To determine...
    view full answer...
  • Multi-Fit Hitch Recommendation for a 1996 Ford Conquest Motorhome on E-350 Chassis
    I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit an RV like yours are multi-fit hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916.
    view full answer...
  • Trailer Hitch for 2015 Ford E-350 Cutaway
    To use the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube # 41990 on your 2015 Ford E-350 Cutaway you are going to need to measure to determine if you need the 7" Weld-On Bracket Kit # 4907 or 16" Weld-On Bracket Kit # 4916 because this hitch is not designed for one specific vehicle. Simply measure from the top of the frame on your E-350 to the bottom of the bumper. If you need less than 5-9/16" to clear the bumper you will use 7" brackets # 4907; if you need less than 14-3/8"...
    view full answer...
    Image 1 for
  • Higher Capacity Trailer Hitch Recommendation for Cutaway Chassis 350 RV
    For RV applications it's hard to fit hitches to them as the back of the RVs are all somewhat different and our hitch manufacturers don't go out and fit them all. Since you need a 7k capacity your best option would probably be a multi fit hitch. Multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916.
    view full answer...
  • Trailer Hitch Needed for a 2000 Four Winds International Hurricane Motorhome
    Although we don't have any specific trailer hitches for your 2000 Four Winds International Hurricane Motorhome we do have a selection of weld-on heavy duty trailer hitches that you can filter through. An example would be the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube # 41990 with the 7" # 4907 or 16" # 4916 brackets. This would be a custom job performed by a professional welder so it would be beneficial to consult them as well to see what would work for the installation. Our...
    view full answer...


< Previous
123. . .6



Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924