Durabilt Lockable Storage Rack for Ratchet Chain Binders - Holds 7 - Aluminum

Video Transcript for Ultimate Overview of the Durabilt Lockable Storage Rack for Ratchet Chain Binders

Hello, everybody, this is Jeff at etrailer.com. Today, we gonna take a look at the Durabuilt Aluminum Storage Rack for the Ratcheting Chain Binders. And this rack is designed to hold seven of those. Now this rack will secure your ratchet chain binders when they're not in use. As we mentioned, it holds seven of the load binders, and it will fit most of the ratcheting chain binder sizes. It is a two-piece design.

It makes it very easy to open and close the rack. Just wanna zoom in here, so we can show you up close. The two-piece design, you can see, it has the nice curved hooks on it, which'll keep the binders in place during transit. And right up at the top here, you can see a hole that when you do line that hole up, it'll allow you to put a padlock through there, to lock it in place and keep anybody from taking your binders. Now, just to demonstrate that, I happened to pull one of the chain binders right here, and you're gonna see you can put it right in there.

And it'll hold it secure it right into place. And as we mentioned, when you slide it up, you can see the holes right here will line up, you put your lock through there and that'll lock it and you can see the binder won't come out then. And then when you unlocked it, drop it down, you give an opening to take the binder right out. Now this rack is an aluminum construction, it's very lightweight, corrosion resistant. It is a very easy installation.

Comes with the included hardware right here to install it Got a few specs on this. Wanna give you the overall heighth. From the very bottom to the very top of the bracket. And that's gonna be right at 25 and a half inches tall, just the rack portion, in other words, not measuring this extra bracket, but just the rack itself, is gonna be right at about 23 and a half inches tall. The width on this, We measured the width of it, is gonna be right at four inches wide, and the total depth on this bracket, is right at three and a half inches deep.

And again, you can see, when you install it it will allow it to slide up or down. It's a two-piece design. So it allows you to put the binder in there, and then when you line the hole up, it'll lock the binder in to keep anybody from taking it. But that should do it for the review on the Durabuilt Aluminum Storage Rack for the Ratcheting Chain Binders..