Replacement Removable Handle for Durabilt Ratchet Chain Binders

Video Transcript for Checking Out the Replacement Removable Handle for Durabilt Ratchet Chain Binders

Hello, everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this replacement removable handle for the Durabilt ratcheting chain binders. Now this part'll replace the removable handle that attaches to your ratchet binder body so that you can tighten your chains over your load. This is designed to work on the binder part numbers DU57GR, DU37GR, DU97GR, or the DU47GR. All four of those parts we do sell separately on our website. Now the binder body that this handle will attach to, we also sell that separately, if you just need the body.

Happened to pull one, just so you can see what it looks like and how we can demonstrate how the handle goes on. But right here is the binder body. The handle, you can see, all you have to do is flip the lever into the open position, slide it over the gear, click it back down and just like that, your ratchet's up working. And then when you go to remove it, just flip it all the way down and take it right off the gear. So this removable handle will help reduce the risk of theft, and it is a steel construction, which makes it very durable.

You can see it does have a nice red paint finish to it, makes it highly visible. Few specs on this, the length of this handle from this end to this end gonna be right at 17 1/4 inches. Total weight of just the handle is about 4.6 pounds. And again, here's your ratchet lever. But that should do it for the review on the replacement removable handle for the Durabilt ratcheting chain binder..