bing tracking image
  1. Accessories and Parts
  2. Epicord
  3. Trailer Wiring
  4. Junction Box
Epicord 7-Way Molded Trailer Plug with Junction Box - 10' Long

Epicord 7-Way Molded Trailer Plug with Junction Box - 10' Long

Item # 277-000141
lowest price pledge
Retail:$57.97
Our Price: $54.90
You Save: 5%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 4 lbs
Quantity: 
Epicord Accessories and Parts - 277-000141
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
1-636-306-4830 to order Epicord accessories and parts part number 277-000141 or order online at etrailer.com. Free expert support on all Epicord products. Guaranteed Lowest Price and Fastest Shipping for Epicord 7-Way Molded Trailer Plug with Junction Box - 10' Long. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (225)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

Epicord Accessories and Parts - 277-000141

  • Trailer Wiring
  • Junction Box
  • Epicord


  • Epicord 7-way molded trailer plug and 7-gang junction box
  • 10' Long heavy-duty cord
  • Wire gauge and function:
    • White (ground): 10 gauge
    • Black (12V power): 10 gauge
    • Yellow (reverse/auxiliary): 14 gauge
    • Red (left turn and stop): 14 gauge
    • Green (tail and running lights): 14 gauge
    • Brown (right turn and stop): 14 gauge
    • Blue (brake): 12 gauge
  • Weatherproof and corrosion resistant
  • Hardware included
  • cETL and ETLus Listing
  • Junction box dimensions: 8" long x 2-1/4" wide x 3-1/2" tall
  • 1-Year Warranty

Junction boxJunction box

RV078-10X Epicord 7-Way Molded Trailer Plug with Junction Box - 10' Long

94244





Video of Epicord 7-Way Molded Trailer Plug with Junction Box - 10' Long

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Epicord 7 Way Molded Trailer Plug with Junction Box Revew

Today we're going to be taking a look at and showing you how to install the Epicord. This is a 7-way molded trailer plug connector with junction box. The 10-foot length is part number 277-000141. The 7-foot length is part number 277-00142. Here's what our wiring kit is going to look like. This is the 10-foot length.

As you can see, we've got a good long length here, nice heavy-duty jacketed 7-pole cable. That's going to go right into our 7-pole plug. This is going to plug right into the back of any 7-pole vehicle and give us all the signals going right to our junction box. This is going to eliminate a lot of the splicing and different wires, trying to get a connection here, get a connection there. These all can be made in the safety of our weather-proof box. You can see here as we open it up, this is all pre-wired.

Got a really nice factory seal here. It's going to keep out the elements for us. We've got top and bottom entries or exits and we've got side entries. This is going to take care of the brake signal going to our trailer, our ground. We've got 12 volt power and we're going to have all our stop signals, out turn signals, everything we need to head down the road safely. After we've decided on our positioning, we can just use a couple of self-tapping screws and secure it right to the frame of the trailer.

Now we can secure our wire off however you want to, whether it's using zip ties or our customer had some loom clamps installed here, so we're just going to go ahead and use them for him. That'll give us length to get up here to the front and our customer's requested that we just leave this loose. He's got a longer and a short tongue for the trailer, so just coil that up here for now, let's make these connections. Let's get our cover pulled off here. The first connection we're going to make here is going to be for our ground wire. Actually, just poke that right through the plug there, going to run this down and I want to connect it right to the white.

I'm going to add a ring terminal to the end of that. I need about 7 of those and that's going to be part number 44-5310A. If we use an 8mm we can back the nut off, right there, and just start laying our new ring terminals right on top. Now, I'm going to bring my brake wires through, this is going to be the ground and also the power for our brakes. Now we'll run in our 4-pole wires. Now once you've got all the wires ran in that you need to for your box, you can actually tighten down the screws there. There's a little clamp that will hold all those wire nice and secure. Now, it's just a matter of getting our cover back on there. Now we'll just plug it into the back of the vehicle here and we can run through our lights. We have our running lights, our left blinker, our right blinker and also our brakes. And that's going to complete our installation of the Epicord, a 7-way molded trailer connector with 7-way junction box.


Customer Reviews

Epicord 7-Way Molded Trailer Plug with Junction Box - 10' Long - 277-000141

Average Customer Rating:  4.7 out of 5 stars   (225 Customer Reviews)


by:

I installed this product yesterday and it is a really nice product. It would be a great product if the darn wire colors from the plug were the same as the industry standard. But if you go by what is on the small mount that the wires screwed to it is accurate.

I got the longer 10' cable as I wanted to mount it further back than the stock metal electrical box that they mount all the stuff in from the factory. I ended up mounting it on the bottom side of the cross braces on the bottom side of the trailer.

I also installed a seperate fuse box to individually fuse all the circuits so that if anything on the trailer shorted out it wouldn't blow the fuses in the truck.


Comments
I loved that I got the longer replacement so I was able to move it to a more easier place to access.
Dakar D - 11/20/2017


by:

Used this to convert a trailer from 4 pin to 7 blade connector so that I could add brakes. Gives a nice place to terminate your wires. The wire color guide on the product page was very helpful when it came to wiring up the trailer. Plan on putting some type of sealant around the wires because unless you use a large 7 conductor wire there will be a gap where water could get in.




by:

This is a great part It made wiring
in
the trailer very easy. It fit underneath the gooseneck and mounted up real nice. I recommend it to anyone that needs to rewire their trailer.





by:

Little over a year since install and no problem thus far with this product. The rubber grommets supplied with it keeps everything water tight. Wires are not colored coordinated! I overlooked that detail in product description and had to rewire everything, lol.


Comments
Actually, theres more than one accepted wire color convention when it comes to trailer wiring color codes which is why we list the function for each terminal/wire color in the product description.
-- Etrailer Expert Mike L - 06/18/2019


by:

It was just as expected. Good quality and no hidden issues.

For everyone else’s essay, the studs are 5mm. So, for the best fit grab you some 5mm heat shrink ring terminals. 1/4in for the mounting hardware. This went on my boat trailer, so I grabbed some stainless steel 1/4in hardware and used nylon lock nuts. I used extension cord for my wire runs. A grounded extension cord will give you your 3 wire runs for the tail lights, a standard 2 blade extension cord for any marker/running lights. Heatshrink adhesive butt connectors on all connections. The wiring info that ETrailer provides was correct for my 2019 F150.

Overall makes for a solid trailer light setup. Highly recommend this junction box.




by:

This product is great!! It is probably overkill for my little utility trailer but I was tired of re-wiring it for shorts in the crappy standard wire that came with the light sets. This junction box feels very sturdy and has the cable/plug is very hefty as well. Easy to setup. The colors didn't match what my car was but it is very simple to swap the terminals to what you need. I forgot to take more pictures through out my install.




by:

This is worth every penny as far as im concerned. Makes wiring up everything on trailer from plug to tail light so much easier. The junxtion box also makes finding shorts easier since it is the hub for all accessories.




by:

Last project built. Used etrailer for almost all parts, 7 pin wiring harness, junction box, tail lights, jacks vent cover and so. Love the leveling jacks. Friend wants one now so started another one. I will be getting all the parts from etrailer...




by:

I needed to completely rewire my landscape trailer because of the poor quality of the original components. This is quality hardware. The only issue I had was the color/functions of the new component did not exactly match with the color/functions on my trailer. It was not a difficult issue to overcome.




by:

This cord replacement was a perfect fit for my trailer and works as expected after a full year of use.




by:

Epicord 7-Way Molded Trailer Plug with Junction Box. I have purchased many items from etrailer and this product is another example of the quality products they represent.


Comments
Remains water tight and took a unsightly wiring mess and organized it. should have purchased sooner
edgewater - 08/13/2017


by:

Well I have some mixed feelings about it the cord is built well but the prongs in the end don’t seem very tight or don’t have enough spring tension on them so with led lights they don’t have enough contact all the time. I kept losing the lights or they would flicker. Finally I had to use some dialectic grease to keep the contact. Also the box is not water proof as it got water in it I had to drill holes in bottom to keep water out. I love the idea of it but it need work !!




by:

Used this to allow a plug and play to hook up needed tail and brake/running lights on my LanceCamper. Spliced the female Lance plug into the provided junctions in the box. Worked great. No under the truck cutting into the wiring harness.




by:

Ordered this to replace the very poor factory wiring on my 18 foot car trailer. Very impressed with quality and with quick delivery of product.
I would recommend measuring your trailer to make sure the 10 foot cord is not too long. I didn't measure first but I was lucky and was able to make it work.
Only complaint is what many others have said about the wire color. I know wire color may vary based on manufacturer, but the standard wire color chart on this very website is different from the colors in this plug. It is not hard to figure out, mostly just annoying having to use a circuit tester to verify the wires or having the color chart pulled up.
Overall great product, Just annoying about the wire color.




by:

I bought this to replace the cord on my 5th wheel. The original one is OK, but the plug doesn't lock into the new receptacle I installed in the truck bed.
This new plug is molded to the cord, and has dual contacts (better electrical connection) and the lug is of the proper dimension to hold it securely in the receptacle. The construction of the terminal box is satisfactory, the wire sizes are adequate, and the cord jacket appears to be thicker than most. The cord is flexible.




by:

I just finished mounting this to my trailer frame and it really seems to be a top notch product. It's so much cleaner looking and sealed connections.




by:

I took delivery today and installed it onto the body of my slide in camper immediately. Installation was simple and effective. There's multiple slots for every applications. Everything works great.




by:

Order was complete and delivered in a timely manner. Only problem (minor) was the 7way pigtail was not wired to color code. Had to use test light to get 3 of the wires in correct location. Could be a problem if someone wasn't comfortable with ringing out wires.




by:

Cord was excellent. I was concerned about the wiring of the plug, but the wiring was completely compatible with my 2015 Ford Expedition and Airstream Trailer. (Yellow auxiliary center wire) No changing around of colors on the wire ends. Great!! It would be nice if Etrailer also sold this cord without the box, as I have a great box inside the Airstream for wiring, and had to remove the box to run the cord through the frame tube. But, for the price of the entire product, the box was really a nice "gift" for those who need it. Thanks, Etrailer.


Comments
It was very well made and we have had NO problems with it. Thanks.
Dale S - 05/07/2018


by:

Can you provide a pin out / wire color vs location on the 7 way plug Epicord 7-Way Molded Trailer Plug with Junction Box - 10' Long - 277-000141 I ordered. I'm seeing several installs where the wire color on this plug dose NOT match standard trailer wire color. Also it did not come with any paper work or instructions stating this. Example yellow is standard trailer for left turn. This 7 way plug looks to maybe use yellow for aux power going by other install photos and research.

This will be a major set back as my trailer has already been compleated and went by standard trailer wire color. ?????


Comments
There is more than one accepted color code/wiring convention for a 7-way trailer connector. The color code for the Epicord 7-way plug/junction box is as follows: °White ground: 10 gauge °Black 12V power: 10 gauge °Yellow reverseauxiliary: 14 gauge °Red left turn and stop: 14 gauge °Green tail and running lights: 14 gauge °Brown right turn and stop: 14 gauge °Blue brake: 12 gauge. This is shown on the product description page on our website.
-- Etrailer Expert Mike L - 02/21/2019


by:

Love the 7 way barrel plug! Was easy to mount the junction box and connect the correct wires to the terminals once ring lugs were attached to the wires. Great light/brake trailer system cable and box!!!

Love etrailer.com!!!


Comments
fine
Will M - 05/24/2020


by:

Worked well once I found that two wires going to the plug were swapped.


Comments
No complaints with the unit over the last year of use, the electric brake setup works perfectly and solved a long running problem with low use hydraulic brakes....
Patrick M - 08/20/2021


by:

I ordered these items for my DIY project, turning my bumper pull trailer into a goosenech trailer. The parts are of good quality and the delivery was quick. I would highly recommend for anyone who needs something for a DIY project to order from ETRAILER.COM
I went from that to this.




by:

This new cable and distribution box will make the wiring job quick and easy. Trailer previously had a 4-wire system (no brakes) and was not up to current standards for lighting, so I'm replacing everything electrical and adding the brakes. This will help immensely.


Comments
This project turned out great! I really like buying from etrailer. They always have what I need, along with great customer service and fast shipping.
Kenneth - 01/20/2020


by:

Nice compact accessible design. Quality built and seems durable.



25
225
Show More Reviews

See what our Experts say about this Epicord Accessories and Parts



  • Wire Color Match to 4-Way Wiring with Epicord 7-Way Molded Trailer Plug 277-000141
    Yes, you are correct about the install of the # 277-000141. The wiring colors you mentioned are correct except the blue wire is for brake output from a brake controller. You would want to run the black wire for both the lighting and a 12 volt auxiliary. Unless you wanted to run the same circuit on your tow vehicle up to the battery as well. The yellow wire you mentioned is reverse light typically.
    view full answer...
  • What is Yellow Post of Epicord Junction Box and 12 Volt Accessory Circuit Used For
    The yellow pin of the part # 277-000141 that you referenced is normally used for the reverse light circuit. This is typically used for reverse lights on the trailer or for a reverse lockout solenoid for if the trailer has surge brakes. The 12 volt accessory circuit (black) can be used for a variety of things. Most common is a breakaway battery charge circuit or interior/exterior lighting. I attached a review video for you to check out as well.
    view full answer...
  • Where to Connect Trailer Running & Side Marker Lights to Epicord 7-Way Junction Box 277-000141
    On the Epicord 7-Way Molded Trailer Plug with Junction Box # 277-000141 the post that should be used to connect running lights and marker lights is the green one that has the green wire attached. Here is the complete wire/function/wire gauge configuration for this item: White (ground): 10 gauge Black (12V power): 10 gauge Yellow (reverse/auxiliary): 14 gauge Red (left turn and stop): 14 gauge Green (tail and running lights): 14 gauge Brown (right turn and stop): 14 gauge Blue (brake):...
    view full answer...
  • Wire Gauge Sizes in Epicord 7-Way Molded Trailer Plug with Junction Box
    The wire gauges in the Epicord 7-Way Molded Trailer Plug with Junction Box # 277-000141 are as follows: White = 10 Black = 10 Yellow = 14 Green = 14 Red = 14 Brown = 14 Blue = 12 The wire gauge in the Epicord # 277-000141 changes with different functions of the wires. Signal wires, like yellow, green, red, and brown, draw less amperage so they use a lighter gauge wire. Heavier gauge wire is used for functions like the brake signal, ground, and 12V power because they carry higher amperage...
    view full answer...
  • Can I Use My 7-Way Truck Wiring To Wire My Lance Camper Harness To My 2018 Ram 3500
    I found the owner's manual for your 2019 Lance 850 and it does recommend to use 8 gauge wire with their proprietary connector. Using the 8 gauge wire from truck battery to the camper ensures you have adequate amperage to the accessories in your camper. Since the vehicle's current wiring for the 7-way is not 8 gauge wire I do not recommend splicing into that wiring to install the camper's plug onto the vehicle. I recommend wiring the Lance vehicle plug into the truck separately or take...
    view full answer...
  • Troubleshooting Trailer Brake Actuator Activating When Vehicle is Put in Reverse
    You must have a short between the reverse light circuit and the brake output if when you put the vehicle in reverse the brakes come on. Since the reverse light circuit is normally the center pin it's pretty easy for it to potentially short to circuits. Check the condition of the wiring connections you made and clean up any obvious shorts you find.
    view full answer...
    Image 1 for
  • How to Wire New 7 Way Trailer Connector With Junction Box
    Long story short, you can wire your brakes and 12v auxiliary charge line into the junction box on the Epicord 7 Way # 277-000141 and continue to use the 4 way connector. With that being said, there is a much cleaner and more practical way to do this. You can start by cutting off the 4 way connector on your trailer and then wiring those wires into the junction box on the Epicord. Once you've wired those in, you'll run the brake wires from your trailer brakes into the junction box, as well...
    view full answer...
    Image 1 for
  • Troubleshooting Brake Controller Showing No Connection When Attached to Horse Trailer
    First thing to try is cleaning the pins on the 7-way connectors. Typically a bit of corrosion will cause the circuits to not function or a brake controller to show "NO CONNECTION" like you listed. I'd try that first and if that does not work you can try rewiring the 7-way using the picture I attached as a guide. I also attached a coupler help articles for you to check out as well.
    view full answer...
    Image 1 for
  • Dimensions of Junction Box of Epicord 7-Way Molded Trailer Plug with Junction Box 277-000141
    The width of the junction box of the # 277-000141 is 3-1/4 inches, the height is 2-1/4 inches and the length is 7 inches.
    view full answer...
    Image 1 for
  • Where Is the Epicord 7-Way Molded Trailer Plug with Junction Box Made
    The Epicord 7-Way Molded Trailer Plug with Junction Box part # 277-000141 is made overseas which is the case for the vast majority of electrical products. I don't have any USA options but the Epicord 7-Way Molded Trailer Plug with Junction Box is still made with quality parts and will last a long time.
    view full answer...
  • Does 4-Way Trailer Wiring Circuit Need to Wire to Trailer Battery
    You don't need to connect the trailer wiring to the battery at all if your plan is to charge it separately. The 4-way can take care of the trailer lighting and then your battery and it's wiring can then take care of whatever circuits you are looking to power.
    view full answer...
  • Availability of 7-Way Wired to Junction Box
    We do have that actually. You would want the Epicord 7-Way and Junction Box part # 277-000141 which is a 7-way with 10 feet of wiring that leads to a junction box.
    view full answer...
  • Troubleshooting Horse Trailer Wiring Where Brakes Lock Up Immediately
    Horse trailer wiring is funny as there's two different ways the standard 6-ways can be wired with the only real difference being the brake output circuit and the 12 volt accessory circuit being swapped. What would have solved your problem initially is if you had swapped those two circuits on your Dodge Ram 6-way initially before messing with the other circuits. If you check out the picture I attached it would be swapping the blue and black wires.
    view full answer...
    Image 1 for
  • Wire Gauge to Use With Epicord 7-Way Molded Trailer Plug
    The Epicord 7-Way Molded Trailer Plug with Junction Box # 277-000141 does have 12 gauge wire, which is appropriate. It can also be 10 gauge, however; either would be fine. I've added a pair of links to video reviews of this product for you to take a look at.
    view full answer...
    Image 1 for
  • How to Convert M105A2 Cargo Trailer from Air-Over-Hydraulic Brakes to EOH or Electric Drums
    You can use your Parkhurst M105A2 military cargo trailer with your Silverado by converting its air-over-hydraulic (AOH) braking system to either electric-over-hydraulic (EOH) or electric drum brakes. Both options would allow the trailer brake controller in your Silverado to activate the trailer's brakes. The simpler and lower cost option is electric drum brakes since these require no hydraulic lines, just fairly simple electrical wiring and installation of a junction box like # 277-000141. You...
    view full answer...
  • Wire Functions of Epicord 7-Way Molded Trailer Plug with Junction Box
    Though there is not a diagram available I will list for you the functions of the wires in the junction box of the Epicord # 277-000141. White = Ground Black = 12V power Yellow = Reverse or Auxiliary Red = Left turn and Stop Green = Tail and Running Lights Brown = Right Turn and Stop Blue = Brake
    view full answer...
  • How To Convert a Trailer From a 4-Way to a 7-Way Trailer Connector
    In order to convert a trailer from a four way flat to a seven way round I recommend using the Trailer Wiring 7-Way Upgrade Kit part # 277-000141. It comes partially pre-assembled along with the rest of the components you need to make the switch. The only thing you need to do is cut off the old trailer connector and then attach these wire leads to the junction box.
    view full answer...
  • What Amp Circuit Protection Usually Protects Brake Output Circuit for Trailer Brake Controller
    When installing junction box like the etrailer part # e99011 that you referenced you do not need to install a fuse on the trailer wiring but if you were asking about on the vehicle side the brake output circuit is typically protected by a 30 amp fuse or breaker.
    view full answer...
  • 7-Way for 1886 Lance Squire Camper to Replace 4-Way
    A 4-way round connector that attaches to a charge circuit is not a standard 4-way wiring at this time. We won't have a way to create 7-way to 4-way that attaches to the charge circuit. I know you don't want to rewire it but I think going to a 7-way setup on camper is going to be your best option like with the part # 277-000141.
    view full answer...
  • How To Replace 7-Way On Trailer and Wiring Harness
    In order to replace the trailer connector on a trailer with brakes you'll first start with the lead. Then, you'll add a junction box. The Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector part # 277-000141 is what I recommend because it combined the above two parts for you already. If any of the wires going from the signals and brakes are damaged you can simply run new wires using primary wire or if they are still in good shape you can reuse them and just tie into...
    view full answer...
  • Is Continuity from Running Lights or Brakes to Ground Normal When Installing a Junction Box
    Yes, the continuity you are seeing after connecting your wiring to your junction box, like part # 277-000141, is normal. The only way that you wouldn't get continuity is if there was a break in the circuit somewhere. If you have your tow vehicle handy you can also test your wiring by simply connecting the 7-Way from your junction box to the 7-Way on your vehicle. You can then run through each light function to make sure your lights are working properly and use the manual override on your...
    view full answer...
  • Replacing Molded 7-Way, Junction Box, and Breakaway Kit on Trailer
    If you have a 7-Way and junction box setup on your the trailer your easiest route will be to just replace the junction box with something like the Epicord 7-Way # 277-000141. This harness features a 7-Way molded plug and pre-wired junction box with terminals so that you can simply make connections to what remains of your trailer wiring after removing the connector. I have attached an installation video so you can see exactly how everything hooks up. The wire color/functions for the harness...
    view full answer...
  • How to Power Trailer Interior Lamps Using Shore Power
    Assuming the lamps in your trailer are 12-volt, you'll need a bench-top type 12-volt power supply which you can easily find online. You'd also need a 7-way socket and pigtail like # 20024. If you choose a power supply with screw terminals on the front of it, the black pigtail wire would connect to the positive terminal and the white pigtail wire to the negative (this assumes that the lamps are powered from the 12-volt circuit from your trailer connector, sometimes they're powered by the...
    view full answer...
  • Can 7-Way Junction Box 277-000141 Be Used to Charge Trailer Battery
    If there happened to be a 12 volt keyed power source in the circuits of the # 277-000141 you could use it for the isolation solenoid # TR118665. Essentially you would need to have the 12 volt circuit of the vehicle already be only active when the key is on. Which if that were the case you wouldn't need the solenoid realistically. If the 12 volt circuit of your truck's 7-way is active all the time you would need to install the solenoid on that circuit and that would get the circuit active...
    view full answer...
    Image 1 for


< Previous
123. . .5



Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jacob T
Video by:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Mary E
Written by:
Mary E
Employee Wilson B
Updated by:
Wilson B
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-636-306-4830