bing tracking image
  1. Accessories and Parts
  2. Equal-i-zer
  3. Weight Distribution Hitch
  4. Tools
  5. Socket
  6. Equal-i-zer
Thin Walled Socket for Equal-i-zer Hitches

Thin Walled Socket for Equal-i-zer Hitches

Item # EQ70-00-4800
Our Price: $86.98
Accessories and Parts
Shipping Weight: 1 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Due to the close tolerances, this thin-walled socket can make it easier to install your hitch ball on an Equal-i-zer weight distribution head. 1-800-940-8924 to order Equal-i-zer accessories and parts part number EQ70-00-4800 or order online at etrailer.com. Free expert support on all Equal-i-zer products. Great prices and Fastest Shipping for Thin Walled Socket for Equal-i-zer Hitches. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (85)
  • Q & A (0)
  • Videos (2)
  • Photos

Equal-i-zer Accessories and Parts - EQ70-00-4800

  • Weight Distribution Hitch
  • Tools
  • Socket
  • Equal-i-zer
  • Equal-i-zer

Due to the close tolerances, this thin-walled socket can make it easier to install your hitch ball on an Equal-i-zer weight distribution head.


Features:

  • Includes (1) 1-7/8" socket for installing hitch ball on weight distribution head
  • Designed for use on Equal-i-zier weight distributing hitches
  • Accepts a 3/4" drive
  • Made in the USA


70-00-4800 Equalizer Thin Walled Socket





Video of Thin Walled Socket for Equal-i-zer Hitches

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Equal-i-zer Thin Walled Socket Review

Today we'll be taking a look at the Equal-i-zer Thin Walled Socket for Equal-i-zer Hitches, part number EQ70-00-4800. Traditional sockets particularly when tightening a ball to your weight distribution system have a hard time getting in to where they need to be. The Equal-i-zer socket with its low profile thin wall drops right into place. As you can see here, we have a traditional socket here on the left with a thicker wall and on the right, we have our Equal-i-zer socket with a thin wall. Though it has a thin wall, it's just as sturdy as your traditional sockets. It's a twelve-point socket with a three quarter inch drive so you need to be sure that your torque wrench has a three quarter inch drive or you may need an adapter. Now we'll go in and show you how to use it.

We've got our hitch ball and our weight distribution system here. We're going to flip around over to gain access to our nut. Our Equal-i-zer socket is just going to drop right down in place. Now we can grab our torque wrench. You want to set your torque wrench to whatever your manufacturer recommends for your hitch ball.

Now we'll need to immobilize the other side of the ball. It's not a bad idea to get an extra set of hands to do so. Perfect. Now we can just flip it back over and continue setting up our weight distribution system. If this we're just a standard ball mount, we'd be ready to tow.

That's going to complete our look at the Equal-i-zer Thin Walled Socket for Equal-i-zer Hitches, part number EQ70-00-4800.

Customer Satisfaction Score:


Customer Reviews

Thin Walled Socket for Equal-i-zer Hitches - EQ70-00-4800

Average Customer Rating:  4.7 out of 5 stars   (85 Customer Reviews)

Due to the close tolerances, this thin-walled socket can make it easier to install your hitch ball on an Equal-i-zer weight distribution head.

by:

Superb service as always from etrailer. com



by:

This socket is really VERY expensive of something used only one time. Does it do the job? Yes, but now I don’t need it any longer, given the ball is attached and secure. I don’t like the feeling that I’ve been gouged.



by:

The 12k Equalizer Weight Distribution Hitch is an AWESOME product and did all it said it would do. Bombed hills, kept my ride steady, and most important kept my family safe on the SoCal/NorCal roads more than 28 hrs of driving north to the redwoods @ Jedidiah Smith then back south again. Next trip coming up quick in a week getting ready for another adventure. With the new EQ WDH set up is a snap! Thank you etrailer Team for all the help and great pricing! See you on the road.



by:

Exactly what I needed



by:

Quality equipment. As advertised.



by:

Its a socket, plain and simple 6 sided socket. but a regular socket does not fit in area where large fastener is located on equalizer hitch. An on the ball engineer could have designed hitch and access to fastener so regular socket would fit, but then you wouldn't need to buy an accessory to install hitch would you.

Pegavas

1/5/2018

Its still a socket Which once youve setup the hitch for your tow vehicle to trailer is not needed. As long as ball size change is not required socket is not used. Find a mechanic who has the tools and pay them to tighten ball hitch.



by:

Just shut up and order the socket. Don’t bother trying to find it elsewhere because you won’t



by:

Exactly what you need to tighten the hitch ball on your equalizer hitch. Its thin enough to fit in between the stabilizer bars. Trust me, you're unlikely to find it anywhere locally. Just order it here.



by:

After a mistaken order of regular wall that wouldn’t work, customer service pointed me in the right direction for the thin wall socket that worked on my hitch.



by:

What can I say...it's a standard 3/4" drive 1 7/8" socket. I actually did not need a thin walled socket to install the ball on my WD hitch (an impact socket would have worked), but that is only because of the design. It is always better to be over prepared when you start installing things, rather than find out you need to now go buy a tool to finish the install. If you are looking at this product then it is probably because you need to install a ball with a 1 1/4" shank. Make certain you have a torque wrench that can handle it (450 ft lb). Don't "gun it down" with an impact gun because the torque from them (if you have it set) is plus or minus 25% on a good day. Since this is a critical connection, do it right.



by:

I am very pleased with my Equal-i-zer Sway Control hitch. Installation was relatively easy. You really do need the thin wall socket to install the ball. Levels my 3/4 ton truck out very well with my loaded 14,000 lb bumper pull trailer. Main reason I got it was for the sway control for 1000 mile trips. It amazes me. Jerk the trailer one direction and it comes back to the middle and stops. Very nice!



by:

Very fast service. We will continue to shop at etrailer for all of our needs. Thank you!



by:

etrailer had what I needed when others could not deliver. It is a shame that I went thru [camping retailer] and they sold me a hitch with out the ball for the hitch while I was traveling and then refused to install the hitch because I opened the box. etrailer is the only one that I trust, they were informative and got me what I needed in a reasonable amount of time. Thank you



by:

This socket is pretty much necessary to install a ball on the Equal-i-zer hitch head. I also had to source a 3/4 drive extension for my torque wrench to clear the head, which was an unexpected expense (not to mention a hard to find part!). It's pricey, especially for something you're likely to only use once as a hobbyist RV owner, but it's in-line with other similar tools, and it's getting harder and harder to find RV shops willing to take on little jobs like torquing a ball to a hitch head.

Other than that, it's a socket. It did it's job, and held up to over 400 lb/ft with no issues.



by:

It is what it is - a 1 7/16th socket but it solves the problem (regular sockets won't fit into the hitch to tighten up the trailer ball on equal-i-zer hitches because they are too thick.
Pricey at $60, but I am not one to take an existing socket and grind it down. Just not worth it to me.
Item was shipped promptly, as usual, by etrailer.



by:

I ordered this because the web site specified this socket was needed to attach the ball to a 6000 lb Equalizer hitch. However, a smaller socket is required for a ball that matches the hitch capacity (2") so it did not work. You should inform people that if you buy a smaller ball then a smaller thin wall socket is needed.



by:

Ordered a new Curt truck hitch along with the 14k Equalizer WD. Ordered at 8pm Monday and recieved 11:30am Weds. Can't get better free shipping than that! Boxes a bit beat up but no damage to parts. Parts are heavy, so not suprised. Hitch was installed in an hour and is a perfect fit but wish it had provisions for plug mount. I knew this when I ordered though. Devin took my order was very friendly and helped with everything I asked about. Will install the Equalizer next week but it looks like what was advertised and should do the job. Will use etrailer again for sure.



by:

I Never would have paid $68 for a single socket if I wasn't surprised dealing with this on short notice!? Really, open the box read the directions and read- now you need to buy a special 1-7/8" socket. My 250# torque wrench cost me less than this single socket... this is something that should be included in the weight distribution hitch packaging. I won't be promoting this to any other Airstream or travel trailer owners, except to warn them of the impending ripped-off. Terrible product marketing. No excuse for this.



by:

Worked great for installing the hitch ball. Originally etrailer contacted me to let me know that this socket was out of stock. I needed the hitch and socket in 3 days. etrailer went out of their way to locate and ship me this socket in the original timeline.



by:

***OVERPRICED***
I’m disappointed that
etrailer allows people to spend $75 on this socket when it’s nothing special.
I can’t even tell that its an Equal-izer brand as there are no special tags or logos on either the bag or the socket.
It came in a standard clear baggy, no branding whatsoever. Disount Harware store repack???
Fitting it, it doesn’t even look like the right size.
It sits very sloppy on the nut and makes it look like it could strip. Comparing it to another 1 7/8” it is a standard 1 7/8” socket.
Save your money!



by:

Immediately after placing the order I was notified the product was not in stock and I was given an expected ship date. I was updated several times during my wait and to my surprise the package showed up a few days earlier than expected. I haven't yet installed the item but it arrived in good condition even though one box was broken open due to the weight of the items inside. Luckily all contents were accounted for.
Product is very sturdy and in great condition with no scratches or shipping damage.
Excellent customer service in keeping me informed on a delivery date. Have purchased before from etrailer and will continue to recommend in the future.



by:

Finally, I have the right socket for the ball hitch nut and it fits perfectly. Solid construction. Very impressed.



by:

Excellent product...a must have to install hitch ball in small space available to tighten the nut on a 14k equalizer hitch.



by:

A 'must have' item when purchasing and installing a trailer hitch ball.



by:

Need this socket to tighten the Hitch Ball on Equal-i-zer weight distribution head. Works perfectly.


25
85
Show More Reviews

See what our Experts say about this Equal-i-zer Accessories and Parts

  • Wrench for a Hitch Ball with 1-7/8 Inch Nut
    For a large socket that will fit the 1-7/8 inch nut on ball # 19286 you can use # EQ70-00-4800.
    view full answer...
  • Recommended Socket to Install a Ball on a Fastway e2 Hitch
    To install a ball, like the Equal-i-zer # EQ91-00-6080, you will need a 1 7/8 inch socket that uses a 3/4 inch drive. The Equal-i-zer Thin Walled Socket # EQ70-00-4800 is ideally suited for this application. The torque rating on the ball will also be the same between round bar and trunnion bar systems and will depend on the specifications listed from the manufacturer. This will be the socket I suggest for both a round bar and trunnion bar weight distribution systems as well.
    view full answer...
  • Recommended Weight Distribution With Sway Control For Flagstaff 21DS Travel Trailer
    The best way to determine what system will work for you is to know what your total tongue weight is. The total tongue weight is the tongue weight of your fully-loaded-ready-to-tow trailer added to the weight of any cargo you place behind the rear axle of the tow vehicle. You will then want to find a system where your total tongue weight falls near the middle of the tongue weight range for the system. Getting a system that is too small will be useless, but getting a system that is too big...
    view full answer...
  • Do You Add the Weight of a Weight Distribution System when Finding the Tongue Weight of a Trailer
    You do not factor in the weight of the weight distribution system when determining the tongue weight of a trailer to choose a weight distribution system. To choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle. Based on the weights you have included the tongue weight...
    view full answer...
  • Correct Equal-i-zer Weight Distribution System for Winnebago Micro Minnie 1800BH
    I show the Winnebago Micro Minnie 1800BH has a GVWR of 5,000 so the Equal-i-zer Weight Distribution System part # EQ37100ET is what I recommend. It's rated from 5,000 - 10,000 lbs so you'll be a bit on the low side but this leaves you room to add more weight or upgrade. The next size down is also too small so this is the correct system for this trailer.
    view full answer...
  • Recommended Weight Distribution System For 2017 Coachman Trail Blazer 26TH
    In checking the specs online it gives a hitch weight of 957 lbs dry and GVWR of 7900 lbs, so I assume that the stamped weight is fully loaded tongue weight. For a weight distribution system, you will want to take the total tongue weight which is the loaded tongue weight of the trailer as well as any cargo weight behind the rear axle of your towing vehicle. You want that total tongue weight to ideally fall in the middle of the weight distribution system tongue weight rating scale. For...
    view full answer...
  • How to Attach Equal-i-zer Weight Distribution System to Trailer Without Open A-Frame
    In order to use the Equal-i-zer Weight Distribution System # EQ37140ET on your slant load trailer that does not have an open A-frame, you would need to drill the larger L-bracket into your trailer's tongue. This should not affect how you connect or set up each time; the only difference would be you are not clamping the L-bracket on. This system does come with the necessary hardware for installation, though it is recommended you use thin walled socket # EQ70-00-4800 to make installing...
    view full answer...
    Image 1 for
  • Does the Hitch Ball Come Installed on the Equal-i-zer Weight Distribution EQ37101ET?
    No, it does not. The hitch ball does not come mounted on the Equal-i-zer Weight Distribution item # EQ37101ET. You will need to use a 1-7/8" Thin walled socket like item # EQ70-00-4800 to get it installed.
    view full answer...
  • Recommended Weight Distribution System For Travel Trailer With 608-Lb Tongue Weight
    The best way to determine what weight distribution system will work for you is to know what your total tongue weight is. The total tongue weight is the tongue weight of your fully-loaded-ready-to-tow trailer added to the weight of any cargo you place behind the rear axle of the tow vehicle. You will then want to find a system where your total tongue weight falls near the middle of the tongue weight range for the system. Getting a system that is too small will be useless, but getting a system...
    view full answer...
  • Recommended Weight Distribution Hitch For A 2021 Grand Design Imagine 17MKS Travel Trailer
    The hitch weight I'm seeing for your 2021 Grand Design Imagine 17MKS is approximately 480lbs so you would be right in the sweet spot of the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37060ET tongue weight capacity. Equal-i-zer is a great brand with trusted quality and the 4-point sway control on this hitch is going to give you a much safer ride. I recommend also getting the # EQ70-00-4800 to make installation of the hitch ball easy peasy.
    view full answer...
  • Recommended Weight Distribution System for Trailer with 700 Pounds Tongue Weight
    We recommend a weight distribution system if your trailer weight is at least 50 percent of your tow vehicle's weight or if the tow vehicle is sagging when towing. Even if your air bags do take out the sag in your tow vehicle, there other advantages to weight distribution, like sway control. To find the correct system you need to take into account your trailer's loaded and ready to tow tongue weight added to the amount of weight in the back of your tow vehicle behind the rear axle. Since...
    view full answer...
  • Recommended Weight Distribution System For 2013 Ford F-150 Towing Jayco Trailer
    Thanks for the information you provided with the weights of your trailer. That makes it much easier to find a system that will work best for you. The best way to determine what system will work for you is to know what your total tongue weight is. The total tongue weight is the tongue weight of your fully-loaded-ready-to-tow trailer added to the weight of any cargo you place behind the rear axle of the tow vehicle. You will then want to find a system where your total tongue weight falls...
    view full answer...
  • Which Equal-i-zer Weight Distribution System is Best for a 6,660 Pound Trailer
    I will be happy to help you out. Based on the gross trailer weight and the empty weight it would appear that the 660 pound listed tongue weight is either 13 percent of the empty weight or 10 percent of the gross weight. So to ensure that we select the best system for your trailer we need to look at what the tongue weight could potentially be. Trailer tongue weight is usually 10 to 15 percent of the trailer weight. So empty and at 10 percent that would be 507 pounds. Loaded to capacity...
    view full answer...
  • Recommended Weight Distribution System Without Chains for 2012 Ford F-150
    Before getting to recommendations, in order to choose the best weight distribution system, you will first need to know your total tongue weight (TTW), which is the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your 2012 Ford F-150, so not just the truck bed, but the back half of the truck bed, so to speak. To determine your trailer's loaded tongue weight you can use a scale such as the Sherline # 5780 or by using one of...
    view full answer...
  • Weight Distribution for a 2012 Honda Ridgeline and 3,000 Pound Trailer
    To choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle. Trailer tongue weight by itself is usually 10 to 15 percent of the gross trailer weight so a trailer that weighs 3,000 pounds should have a tongue weight of 300 to 450 pounds. Having too little tongue weight...
    view full answer...
  • Does Ball Come Mounted on Equal-I-Zer Weight Distribution and is it Better than Reese or Husky
    The Equal-i-zer Weight Distribution system # EQ37101ET does not come with the 2-5/16 inch ball already installed in the head. It is fairly easy to do though but you will need a thin-walled socket # EQ70-00-4800 to make it easier. We can do it here only if the system is also installed here. A shank is not included with this system. I have included a link to the compatible shanks for you. As far as what is the best weight distribution system it is really a matter of opinion. I would say...
    view full answer...
  • Does a Weight Distribution System with Anti-Sway Completely Eliminate Trailer Sway
    If you were to use a system like the Equal-i-zer Weight Distribution System # EQ37120ET that you referenced with your trailer, it helps to keep the trailer in-line when sway is caused by crosswinds, curvey roads,or passing vehicles. There may be some very slight sway, but good Weight Distribution (WD) systems that are properly rated will eliminate almost all of it. To make sure that this WD system is correct for your towing setup you will first need to find the Total Tongue Weight (TTW)...
    view full answer...
  • Can The Shank From One Weight Distribution System be Used on Another System
    Yes, you will be able to use your current weight distribution shank on the Equal-I-Zer Weight Distribution System, # EQ37061ET. All the other needed parts will be included with the new weight distribution system. For installing the trailer ball to the weight distribution head, I recommend using a thin walled socket like # EQ70-00-4800. This socket is designed to work with Equal-I-Zer hitches
    view full answer...
  • Does the Equal-i-zer Weight Distribution System # EQ37140ET Comes with a Shank and Hitch Ball
    The Equal-i-zer Weight Distribution System # EQ37140ET that you referenced does come with a shank and a 2-5/16" hitch ball so you will not have to purchase anything else for your towing setup. The only other thing that you may want to get is a 1-7/8" thin walled socket like part # EQ70-00-4800 to help make installing the hitch ball easier. You will want to make sure that the Total Tongue Weight (TTW) of your towing setup fall in the middle of the Tongue Weight (TW) range of this Weight...
    view full answer...
  • Outer Diameter of Equal-i-zer Thin Walled Socket
    Part # EQ70-00-4800 is a 1-7/8 inch socket with an outer diameter of around 2-3/8 inches.
    view full answer...
    Image 1 for
  • Is the Equal-i-zer WD System w/ 4-Point Sway Control Too Much for a Trailer with a 7,000 lb GVWR
    The title of the Weight Distribution (WD) system really doesn't matter at all. You always want to choose your WD system based off of the weight of your trailer. You want to choose a WD system with a Tongue Weight (TW) range that the Total Tongue Weight (TTW) of your towing setup falls in the middle of. To find the TTW of your towing setup you will need to add the TW of your fully loaded and ready-to-go trailer along with the weight of any cargo behind the rear axle of your tow vehicle....
    view full answer...
  • 2005 Dodge Durango 2WD 5.7L Hemi towing capacity
    I found the same varying tow capacity info for your 2005 Dodge Durango with a 5.7 liter Hemi so your best option would be to contact a Dodge dealer and have them tell you what your vehicle is rated for. Any time you tow over half the towing capacity of the vehicle you want to use a weight distribution system. And most likely a 3,600 lb trailer would be over that or at least very near it. The Equal-I-Zer system part # EQ37060ET would work great for a trailer of your weight as it has a tongue...
    view full answer...
  • Recommended Weight Distribution System for a 6,528 lb GVWR Trailer
    To determine the correct Weight Distribution (WD) system for your application you need to look for one with a Tongue Weight (TW) range that the Total Tongue Weight (TTW) of your towing setup falls in the middle of. To find the TTW of your towing setup you will need to add the TW of your fully loaded and ready-to-go trailer along with the weight of any cargo behind the rear axle of your tow vehicle. Keep in mind that a properly loaded trailer will have a TW that is 10-15% of the loaded weight...
    view full answer...
  • Recommended Weight Distribution System With Sway Control For 3100-Lb Travel Trailer
    The best way to determine what system will work for you is to know what your total tongue weight is. The total tongue weight is the tongue weight of your fully-loaded-ready-to-tow trailer added to the weight of any cargo you place behind the rear axle of the tow vehicle. You will then want to find a system where your total tongue weight falls near the middle of the tongue weight range for the system. Getting a system that is too small will be useless, but getting a system that is too big...
    view full answer...

Do you have a question about this Accessories and Part?


Info for this part was:

Employee Dan D
Updated by:
Dan D
Employee Lindsey S
Updated by:
Lindsey S
Employee Adele M
Updated by:
Adele M
Employee Shelly K
Updated by:
Shelly K
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video by:
Dustin K
Employee Hayden R
Installed by:
Hayden R
Employee Andy C
Installed by:
Andy C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924