Replacement Lock for Extang EnCore Hard Tonneau Cover

Video Transcript for Review of Extang Tonneau Cover Parts - Replacement Lock Core Assembly - EX28620094-28

Ellen: Hey, everyone. I'm Ellen here at etrailer.com, and we're going to be taking a look at the Replacement Lock Core for your Extang EnCore Tonneau Cover.So something happened to your original key, and you can't lock up your system anymore or maybe it got damaged somewhere along the way or one of these components got dinged up or banged up somehow, this is going to be that direct replacement from the manufacturer to allow you to lock up your tonneau cover again and increase the security of any items inside that tonneau cover.So it's going to come with all the parts you see laid out here. We'll have a new set of keys to match with this lock core. You can see I've got the lock core in my hand here. We'll have that little cap to go over and help protect it from any kind of water and dirt getting in there and causing issues with that locking door.Comes with two keys to unlock our mechanism here, so it should allow you to turn that and get everything in place. Lock and unlock.

And then it also comes with the bezels, a ring nut for our threaded lock core portion. This is going to be kind of a little wrench to help tighten that nut down on the assembly. There's also the screw to attach the bracket to the bottom of the assembly and a new C-clamp or C-ring to go over this housing. It kind of fits in this little lip here to keep that nut from backing off.Now, there is one component that you will have to replace using the existing hardware on your tonneau cover. That's going to be the cam bracket.

It kind of looks like a little U-bolt bracket or a little U-shaped bracket that goes here and attaches with this bolt. It does not come with that, so you, again, will have to reuse that hardware from your original setup.This is going to fit a couple of different Extang EnCore tonneau covers. The part numbers for those are listed on the product page here at etrailer.com. Should fit your.. excuse me, your Tacoma, Toyota Tacoma, and also your Honda Ridgeline.

So if you want to be sure that it's a fit for your particular tonneau cover, check out those part numbers listed on the product page and make sure it matches with what you have.This kit is made in the USA, and that's pretty much all there is to it for our look at the Replacement Lock Core Assembly for your Extang EnCore Tonneau Cover. I hope this video has been helpful in deciding if this component is for you.Again, the bezels will have our upper bracket or upper bezel. It looks like that. The lower one goes on the inside to match up with your hardware.That's it for me. I hope this has been helpful.

If you need any other replacement parts for your tonneau cover, we do have a lot of options here at etrailer.com, so check them out.Thanks for watching.