bing tracking image
  1. Accessories and Parts
  2. Fastenal
  3. Fifth Wheel Installation Kit
  4. Gooseneck Installation Kit
  5. Trailer Hitch
  6. Tools
Nylon Tube Brush - 1/2"

Nylon Tube Brush - 1/2"

Item # 814092
Our Price: $12.32
Accessories and Parts
Shipping Weight: 0.02 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
1/2" Diameter nylon brush is great for cleaning out weld nuts on vehicle frames - makes your hitch installation much easier! 1-800-940-8924 to order Fastenal accessories and parts part number 814092 or order online at Free expert support on all Fastenal products. Great prices and Fastest Shipping for Nylon Tube Brush - 1/2". Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (505)
  • Q & A (0)
  • Videos (2)
  • Photos

Fastenal Accessories and Parts - 814092

  • Fifth Wheel Installation Kit
  • Gooseneck Installation Kit
  • Trailer Hitch
  • Tools
  • Tube Brush
  • Fastenal
  • 1/2 Inch

1/2" Diameter nylon brush is great for cleaning out weld nuts on vehicle frames - makes your hitch installation much easier!

  • Loop handle
  • Straight back
  • Nylon fill
  • For cleaning and deburring
  • Dimensions:
    • Brush length: 3"
    • Stem diameter: 1/8"
    • Brush Diameter: 1/2"
    • Overall length: 8-1/2"

0814092 Nylon Tube Brush - 1/2"

Video of Nylon Tube Brush - 1/2"

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Fastenal Tools - Hitch Tools - 814092 Review

Today we're going to review part number 814092. This is the Fastenal half inch nylon tube brush. This brush is great for cleaning out well nuts on your vehicle frames when you're installing a hitch, makes that install much easier. We use it here at Etrailer. This nylon brush has a nice metal design, has a loop handle on the end that help you hold it. It does use nylon filled bristles on the brushes.

This used in cleaning and deburring any of the well nut holes. Dimension on this, overall length, to give you an idea, it's going to be 8.5 inches. Just the brush itself, the bristles is 3 inches. The diameter is half an inch on the bristles themselves. Basically, what you'll use this for is you want to start by soaking the well nut bolt holes on the frame of your vehicle with a penetrating lubricant, and then let the lubricant soak in a while. Then you take this nylon wire brush, stick it up into the holes, move it around, and basically that'll scrub out the holes and free any dirt or rust from inside those holes.

It's actually very helpful on any vehicles that have a few years on them. Newer vehicles might not be as bad, because it didn't have time to build up. On some of the older vehicles, it's good to have this clean out anything in those well nut holes. You might have to do it a few times, but it should allow the bolts . You take one of the hardware bolts. Once you get it cleaned out, try it in there, make sure it threads in a lot easier.

It does save you a lot of time, makes the bolt fit more easy. That should do it for the review on part number 814092. This is a Fastenal half inch nylon tube brush.

Customer Satisfaction Score:

Customer Reviews

Nylon Tube Brush - 1/2" - 814092

Average Customer Rating:  4.7 out of 5 stars   (505 Customer Reviews)

1/2" Diameter nylon brush is great for cleaning out weld nuts on vehicle frames - makes your hitch installation much easier!


Great price. Helped cleaning out the th reads



It really did help

Etrailer Expert

Mike L.


@Paul We're glad to hear that. If you're happy, we're happy!


This was the third E-trailer hitch I have installed on my personal vehicles. Each time, I watched the on-line installation videos then installed the hitches in my driveway, by myself. They fit perfectly every time. I also installed the wire harnesses that also fit perfectly. Their staff is very helpful and available if you have any questions. I highly recommend E-trailer and their excellent products.


It was very easy to install and it met all my expectations. The video on-line was very helpful in understanding the entire process before we bagan instalation. Ashley at etrailer was most helpful in making sure we got the right product for our car. Our plan is to use it exclusively to haul our bicycles around with us as we travel. We will definately look at the bike racks etrailer has to offer as well.


OK for cleaning out dirt but if you have rusted threads in a frame bolt hole, you will need to step up your game.


Was good to have to clean factory holes to make the installation easy.


The whole process from ordering to getting the hitch was awesome. It arrived a lot quicker than I thought it would. I have not been able to install it just yet due to a cold snap in our area. Daytime high of 15 degrees and no garage to work in, makes it too difficult to do it. I am anxious to get it put on the Rav4 . The only minor problem we had was the carton was taped up by UPS due to the hitch breaking out of the carton on one side. The other side did start to a little bit. Would recommend them increase a little more packing material around the square mounting brackets to eliminate that problem. Otherwise, awesome !

by: 11/06/2023

Exactly what I needed.


Good quality brush - very firm bristles - just right. Reasonable price. Thanks!


Easy ordering. Received quickly.


It's very solid, and supports our bike rack just fine. It was installed on a 2007 Toyota Sienna and I had to take it to our local auto shop because I didn't have a tap and die set to bore out the rusty pre-drilled holes. It does sit a little low, so be careful when backing up near curbs. You'll definitely scrape! Otherwise, very happy with it so far. Oh, and the shop had to adjust our exhaust a little bit because it hit the hitch receiver when we hit bumps.


The brush is very easy to use. I still use it to clean out road debris from bolt holes in my car and hitch.


Very helpful!


I'm going to be completely honest and review this product from start to finish. Finding the "hidden hitch" online was extremely easy. Their website walks you right through finding the correct one for your vehicle and they have an enormous inventory of everything you could need for towing. I have a 06' Honda Odyssey. The videos were greatly helpful to watch before receiving the hitch so I knew EXACTLY what to do when installing the hitch. I decided to buy one and was genuinely excited to get this thing on our Honda. Their tracking service was accurate and informative, showing me where the package was with a picture of it moving across the states. Package arrived late in the evening (7:45pm) and the box it was in had been completely destroyed. Both ends of the box had to be heavily repaired with packing tape and there were holes, drag marks, etc all over this box. As for the product inside? It had plenty of scrapes, dents, dings, etc. Now this thing is solid steel so I wasn't really concerned about the cosmetic condition of the hitch. Just shows you that UPS does NOT care about your packages, when you receive them and will destroy them. You should package items like they are going into war. Used the spiral brush to clean the threaded holes on the frame of the Honda and used one of the bolts to make sure they would screw in quickly and easily.... they all did. Took 20 minutes to put the hitch on myself (I used a few small boxes to hold the hitch into place under the rear of the odyssey or there abouts until I could put in all the bolts, spacers and washers. The information on the install sheet was easy to follow and had all the vital information, like torque specs. Installing the wiring harness for the trailer was ridiculously easy. I thought it was going to be a hassle, cutting wires, dealing with electrical tape, trying to figure out where wires come and go, etc but it wasn't. I pulled off a panel and then the side panel. The wires literally just PLUG IN to a control box and the ground wire gets bolted (small bolt) to the grounding unit. Then you just run the wire along existing wires, zip tying along the way, feed the wires through to the spare jack compartment for storage. Then I had to just plug in a fuse, provided by them, into the fuse board and I was done. It took me about 1 hour to install the hidden hitch and the wiring harness and be completely tow ready....amazing. Overall quality of materials, wires, product: 10/10. Customer service, instructional videos, installation instructions: 10/10. Timeliness of purchase, shipping and installation: 10/10. Condition box/product was received in: 4/10. I would HIGHLY recommend this product and It is a SOLID piece, easy to order and install to make your vehicle tow ready. This set up was the easiest thing I have EVER installed on a vehicle, very pleased overall with the end result. Here are a couple pics of the hitch installed and the trailer wiring harness ready to go.

Adam P.


I still have the hidden hitch. I just went to visit my friend and his parents for Xmas in Alabama two states away from my home in South Carolina. I told my buddy I was going to get back into fishing so he gave me his bass board that has been sitting in storage for 8 years. I didnt think the Honda Odyssey 06 could tow a boat... seemed definitely out of the soccer mom vehicles rep. Anyhow, it towed it fine. The ride was actually very smooth and had zero issues. Im glad I kept the hidden hitch after our move across the USA... came in handy for towing the boat. Great product, great site.... and also, the hidden hitch doesnt have any rust, damage or signs of aging... looks brand new after a little over a year. Highly recommended product.


So far so good. Took approximately an hour to install, including unpacking the hitch and cleaning out the weld nuts. While potentially possible to install on your own with strategically placed supports, it's more realistic to install with two people, even if one of them is just lifting, steadying, and holding the hitch in place while you do all the work. Everything lined up perfectly. Didn't even need to put the van up on ramps. Trimmed the plastic fascia on the driver side as shown in the video instructions and worked like a charm to reinstall.

Test fit our bike rack (which is our primary intended use) and everything fit snuggly. So far, very happy with the purchase.


After balking at the cost to have an auto-shop add a trailer to our Toyota Highlander, we found and decided to take a chance. The "how to" videos factored considerably in our decision to buy ... they made it look so easy! And surprise! It really -WAS- that easy. We used standard block-type ramps (the kind you can buy for $40 ) to get the SUV up off the ground high enough to get underneath to do the work. Everything came off as easy as it was showed in the videos. Other than the fact this bar is a heavy so we had our teen daughter help hold it steady while we bolted it into place (i.e., get help for when you go to lift it), it went super smooth. Thanks for saving us $280 over the cost the car dealer quoted us! P.S. - be sure to watch the linked videos so you get the right trailer lighting attachment and ball hitch for your new hitch.



We are very happy with our trailer hitch, and all the accoutrements that we purchased with it. Your videos were enormously helpful, the hitch went on easily with a bit of help from our teenage daughter to lift it up into place, and we recommend your business to friends when they express an interest in getting a camper.


I was unable to find a brush like this in the local stores. I use it to clean the threads underneath the car where the bolts to the trailer hitch get installed. Essential tool especially if the car has some years and miles on it. I have used in conjunction with the proper size tap to ensure threads are clear and clean.



I used it on the day I installed the hitch. Havent had an occasion to use it since.


Good product, steel handle with sturdy nylon brush, well packaged and fast shipping


Product arrived as advertised. Installation took 30 minutes. Fit and finish were perfect. I'm very pleased with the quality.


Easy installation, low profile and excellent quality. Exactly what I was looking for in a hitch receiver for our 2021 Pilot.


There was a lot of buildup on my undercarriage when I want to try to install the trailer hitch. This tool cleaned out the mounting holes without any problem and worked as advertised.

Roberto R.


We were very pleased with our purchase, but we sold that vehicle a few months ago. The new vehicle has a hitch and the cargo carrier fits it nicely. I will definitely come back to your group for any of my future purchases. The hitch we had was on a 2008 Honda CR-V. I would caution any future customers that if they use a cargo carrier like ours, that they understand that the vehicle exhaust is in line with the carrier.


We bought this little brush upon the advice of the trailer hitch "how to" video and I'm glad we did as one of the crud-caps had fallen off our truck's body-frame and it would have been a royal P.I.T.A. to get the crud out before cleaning otherwise. It's super-cheap, so if you're doing it yourself, spend the extra couple of bucks. Bonus ... we've reused it since the install to get crud out of other things, as well.



We are very happy with our trailer hitch, and all the accoutrements that we purchased with it. Your videos were enormously helpful, the hitch went on easily with a bit of help from our teenage daughter to lift it up into place, and we recommend your business to friends when they express an interest in getting a camper.


Brush worked exactly as expected, although in the course of the last year, it has gotten only limited use. Initially, it was used to help clean the pre-drilled holes for the receiver, and it worked perfectly.


Just as advertised. Very good product. Easy to install if you follow the instructions provided. It took me about 30 mins to install. You definitely need somebody to hold one side while you bolt in the other. I didn’t need to lift the car to install it. Super easy if you have the right tools.


The receiver install video was excellent, very much appreciated the level of detail. Installing this hitch receiver was very easy with 2 people and a lift for the car (just followed the video for the 2013 MDX). The only issue I had was that the video says the flange bolts need a 19mm socket, but the bolts I received needed an 18mm socket. Otherwise everything was right on. I have used the hitch receiver with a cargo carrier to transport a mobility scooter (~800 mile round trip) and it worked very well!

Installing the wiring harness was also very easy by following the video (again great detail). The extra hints for the brush (receiver video) and the circuit tester (wiring harness video) were also very helpful. All products are working very well. Thanks for making this install so easy and successful!!!


perfect item to clean out the bolt holes as I installed the hitch 4 years after the car was originally purchased.

Show More Reviews

See what our Experts say about this Fastenal Accessories and Parts

  • Recommended Tool For Cleaning Threads
    To clean threads I recommend using a nylon brush like # 814092. This will allow you to clean out any debris without causing any damage to the threads like a wire brush might cause. Sometimes there is paint or powdercoat in threads that may require you to use a thread tapper to clean them out entirely. You can pick this up at a local hardware store or create your own.
    view full answer...
  • Does The Curt Hitch 13088 Require Drilling To Be Installed On A 1996 Nissan Pathfinder?
    The Curt # 13088 will require absolutely no drilling to get installed on your 1996 Nissan Pathfinder. This will bolt right into factory weld nuts that are already in your frame, so it's a nice easy install. With that being said, these weld nuts can get clogged up with debris over time, so you may need to clean them out before the install. This is pretty common and all you need to do is soak them with WD40 and then scrub them out with something like the Fastenal Nylon Tube Brush # 814092....
    view full answer...
  • Will Muffler Need To Be Lowered to Install Draw Tite Hitch On 2011 Hyundai Accent 3 Door
    The Draw-Tite Trailer Hitch # 24795 is a fit for your Hyundai Accent 3 Door Hatchback. In order to install this trailer hitch on your Accent, you will need to lower the muffler to gain access to the weldnuts to install the hitch. I have attached the installation instructions for this hitch for you. We recommend cleaning the weldnuts before installing the trailer hitch. This will help ease your hitch installation. First you will want to spray the weldnut with a spray lubricant, then clean...
    view full answer...
  • Does The Draw-Tite Trailer Hitch Receiver # 36336 Require All 4 Drivers Bolt Holes To Be Used?
    For the Draw-Tite Trailer Hitch Receiver # 36336 on your 2005 Lexus ES 330 if the 3rd hole on the drivers side frame rail has a threaded weld nut you will not use the u-bolt to secure the receiver. The manufacturer instructions which I have linked below addresses these particular vehicles in step 4. They state " 4. If existing weldnut is present in location shown above, omit U-Bolt and use existing weldnut and optional fastener." This reflects how we installed the receiver our installation...
    view full answer...
  • What to do if Bolts Seem Too Large to Install Hitch on 2017 Buick Enclave
    This is actually a pretty common issue, and the bolts that came with the Curt Trailer Hitch Receiver # 13424 that fits your 2017 Buick Enclave. You will simply need to clean the existing bolt holes (weld nuts) with a spray lubricant and Wire Brush # 814092. I have added links below to a help article on how to do this as well as a video which demonstrates this.
    view full answer...
  • Hitch Bolts Do Not Want to Thread Into Weld Nuts on 2008 Dodge Nitro
    It sounds like the weld nuts need to be cleaned. We recommend cleaning the weld nuts with some spray lubricant and a tube brush # 814092 or wire brush # DW00254. The tube brush will help clear out any dirt, debris, or rust that has built up over time and is preventing you from installing your Curt hitch # 13334. I have attached a review video of the tube brush and an installation video of the hitch on a 2008 Nitro for you. If cleaning the weld nuts does not help, please feel free to let...
    view full answer...
  • Mangled Trailer Hitch Bolt Hole on Volvo XC90
    The Curt Trailer Hitch Receiver # 13559 for your 2008 Volvo XC90 may need you to use some spray lube and a tube brush like # 814092 to loosen gunk that may have found its way into your weld nut. If the weld nut threading is too mangled due to crossthreading, you can use a larger thread tap and a larger grade 5 bolt compatible with that new threading for the installation.
    view full answer...
  • Bolts Will Not Install on Draw-Tite Hitch on 2013 Honda Odyssey
    The bolts are correct for the Draw-Tite Trailer Hitch # 76025 that fits your 2013 Honda Odyssey, and it's not an unusual problem for the bolts not to completely fit into the holes during a hitch installation. What you need to do is use some lubricant and the Nylon Tube Brush # 814092 to clean the bolt holes, as they have accumulated dirt and other grime that makes it difficult to get the bolts started. I have added a link to a help article for you to check out as well which has some...
    view full answer...
  • Checking Bolts Included With Draw-Tite Trailer Hitch For 2005 Nissan Murano
    The bolts that are included with the Draw-Tite Max-Frame Trailer Hitch, part # 75148 are M12 X 1.25 CL8.8 fasteners. The fasteners should fit in the weldnuts on the frame of your Murano. You may want to take a fastener to a local hardware store and compare the threads and size to make sure you have the right size. There may be corrosion you can't see on the threads. Try using a penetrant like PB Blaster and spray the threads, then let it sit overnight. Then spray again the next day...
    view full answer...
  • Does 2016 Honda CR-V Have Weldnuts in Frame Rails for Installing Trailer Hitch
    Yes, your 2016 Honda CR-V does have weldnuts in the frame of the vehicle which will be used to install a hitch like the Draw Tite part # 75742 that you referenced. Draw Tite recommends cleaning the weld nuts with a wire brush like the # 814092 before threading the bolts in also. I attached the a link to the install video you mentioned as well.
    view full answer...
  • Troubleshooting Bolts Too Big When Installing Trailer Hitch on 1998 Jeep Cherokee
    It is actually pretty common for the bolts to seem like they are too big to fit when installing a trailer hitch such as the Curt Trailer Hitch Receiver # 13084 that fits your 1998 Jeep Cherokee. The issue is especially prevalent in more well-traveled vehicles because dirt and corrosion will have taken their toll, making the bolts seem too big for installation. The best option is to use lubricant and then very thoroughly scrub the weld nuts with Nylon Tube Brush # 814092. This can take...
    view full answer...
    Image 1 for
  • Troubleshooting Curt Hitch Hardware Not Fitting 2008 Jeep Liberty
    The hardware that comes with the Curt Trailer Hitch Receiver # 13245 are 6 conical tooth washers and 6 M12x1.75 bolts. These are designed to fit your 2008 Jeep Liberty exactly so if the hardware isn't fitting I'd triple check what you received is correct. If you ordered it from us let me know what your order number is and I can have our customer service team reach out to you. I've never heard of this being a problem with this hitch before so the only thing I can think of is that you need...
    view full answer...
  • Hitch Hardware and Installation for Draw-Tite # 75684 on 2011 Kia Sorento 4 Cylinder Model
    For your 2011 Kia Sorento 4 cylinder, the Draw-Tite Max-Frame Trailer Hitch Receiver # 75684 is a confirmed fit. The hardware that comes with this kit are designed specifically to fit the weld nut of your trailer frame. They are M10 x 1.25 x 30mm hex bolts. Because the weldnut is easily gunked up, I recommend using the Nylon Tube Brush - 1/2" # 814092 and some spray lubricant to clean the weld nuts prior to install. If all else fails you could go to an auto parts store and borrow a...
    view full answer...
  • Installing Trailer Hitch On 1999 Cadillac DeVille
    I have attached the installation instructions for the Draw-Tite Trailer Hitch Receiver, part # 36267. The installation requires no drilling and is really a pretty easy install. You just need to lower the exhaust and use the existing holes ion the frame on your Cadillac. Then raise the exhaust back into place and that's it. To clean out the existing holes and weldnuts on your vehicle you can use part # 814092.
    view full answer...
  • Unable To Start Bolts To Install A Draw-Tite Trailer Hitch On A 2011 Toyota Avalon
    Sorry to hear about the trouble you're having installing the the Draw-Tite Sportframe Trailer Hitch on your 2011 Toyota Avalon. A lot of times the factory weld-nuts that the hardware for your hitch installs into can become packed with grime or paint, and may not allow the bolt to thread. I recommend taking a nylon brush # 814092 to the weld-nuts to clean off the threads a bit. Also, since this brush is made from nylon, you don't have to worry about damaging the threads on your factory...
    view full answer...
  • How to Install the Draw-Tite Sportframe Trailer Hitch Receiver Part # 24923 on a 2014 Lexus IS 350
    The Draw-Tite Sportframe Trailer Hitch Receiver part # 24923 which is a confirmed fit for your 2014 Lexus IS 350 will not require you to remove the exhaust for installation but you will need to lower it down and away from the hitch. To do this there are 4 rubber isolators, 2 per side that hold the exhaust in place. To remove them you will first want to spay them down with a lubricant such as WD-40. Once the isolators have been lubricated you can take either an exhaust hanger removal tool...
    view full answer...
  • 2006 Infinity FX35 Trailer Hitch Receiver Mounting Hardware and Installation
    The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13558 is a confirmed fit for your 2006 Infinity FX35 and does come with all the mounting hardware needed. I've attached the installation details to help. You will only need to clean the exiting weldnuts using a brush like # 814092 and UltraLube Biobased Spray Lubricant and Penetrant. I've attached an article to assist with this.
    view full answer...
  • Troubleshooting Bolts From Draw-Tite Trailer Hitch Not Fitting Frame Holes on 2014 Infiniti QX60
    The Draw-Tite Max-Frame Trailer Hitch Receiver # 76031 referenced in your question is confirmed to fit your 2014 Infiniti QX60. I went through the installation steps and found that the 8.8, M12 x 1.25 x 35mm bolts you mentioned are the correct size for your vehicle. The issue you are experiencing with fitting the bolts into the existing holes in your vehicle's frame is actually not too uncommon. Since the frame of the vehicle is constantly exposed to dirt, moisture, and salt, this gunk...
    view full answer...
  • Carriage Bolts That Come With Curt Trailer Hitch Receiver 13084 and How To Clean Weldnuts
    The Curt Trailer Hitch part # 13084 comes with 6 of grade 8, 1/2-13 x 1 3/4 carriage bolts. I recommend to clean the weld nuts with a brush like part # 814092 before trying to screw in the carriage bolts. It helps to use a brush and WD-40. I have attached a helpful article for your reference.
    view full answer...
  • Cleaning the Weld Nut Threads on a 2009 Chevy Traverse to Install a Trailer Hitch
    Tapping the threads should be a last resort because if done improperly the threads in the weld nut on the vehicle can get damaged or altered causing the bolt not to fit. What we recommend first is cleaning out the weld nuts using a spray penetrate like WD40 or PB Blaster, letting it soak for 15 minutes, and then going at it with a wire brush, battery terminal cleaner, or nylon brush such as # 814092. This process may need to be repeated a few times. In the event that a thread tap must...
    view full answer...
  • Installation of Curt Trailer Hitch # 13051 on 2001 Jeep Grand Cherokee
    Curt Trailer Hitch Receiver # 13051 will not require removing any parts of your OEM crossbar or frame. It will simply have you remove some hardware for the tank shield and then clean out a weldnut that will be utilized. The tank shield will remain in place. You may need to use some spray lubricant and a brush like # 814092 to clean the weld nut to ensure proper fit prior to installing your hitch.
    view full answer...
  • Installation of Curt Trailer Hitch Receiver 13149 on 2011 Toyota Rav4 AWD
    The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13149 is a confirmed fit for 2006 to 2018 Toyota RAV4 models with the exception of electric models. Your exhaust will need to be lowered but it should simply bolt into place unless the hitch has been bent or damaged. I've attached the installation instructions and a video to assist. Because the hitch installs into existing weldnuts in the frame, I recommend using some WD-40 and a nylon brush like # 814092 to clean the threads...
    view full answer...
  • What are the Torque Specs for the Curt Trailer Hitch Part # C13105 on a 2006 Toyota Sienna
    The torque specs for the bolts that are included with the Curt Trailer Hitch Receiver part # C13105 which is a fit for your 2006 Toyota Sienna can be seen on page 1 in the instruction manual which I have attached for you. In order to prevent cross threading the weld nuts that are in the frame of your Sienna I highly recommend using a nylon brush part # 814092 before threading the new bolts in. I have also attached a sample install video for you as well.
    view full answer...
  • Running Lights on 2 Trailers Not Working When Connected to a 2016 Chevy Silverado 2500
    I will be happy to help. This sounds like an example of a corroded trailer connector either on the 2016 Chevy Silverado 2500, the trailers, or both. The first thing to do is make sure that the truck and trailer connectors are clean and free of corrosion inside, where the wires attach, and outside on the pins. Using a wire brush could work but I recommend a nylon brush such as # 814092 to avoid short two pins together. If that does not solve the problem, you can use a circuit tester such...
    view full answer...

< Previous
123. . .5

Do you have a question about this Accessories and Part?

Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Andrew K
Video Edited:
Andrew K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Patrick B
Video Edited:
Patrick B
Employee Andrew L
Video Edited:
Andrew L
Employee Mike H
Video Edited:
Mike H
Employee Dustin K
Video Edited:
Dustin K
Employee Sue W
Video Edited:
Sue W
Employee Chad S
Video Edited:
Chad S
Employee Chris R
Video Edited:
Chris R
Employee Nicholas E
Installed by:
Nicholas E
Employee Matthew S
Updated by:
Matthew S
Employee Hannah L
Updated by:
Hannah L

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.