Lift Spacers for Firestone Ride-Rite Air Helper Springs - 1-1/4" Spacers - Qty 2

See what our Experts say about this Firestone Accessories and Parts

• Can I Install Air Bags On A 2023 Toyota Tundra With A 1" Spacer On Top Of The Coil
  You can certainly still install an air bag kit on your 2023 Toyota Tundra with a 1" coil spacer. If the lift adds distance between the axle and the frame, you can use the spacer kit # F2536 with the # F89VV Air bag Kit to compensate for the lift. If the your lift kit does not effect the distance between the frame and the axle, you can install the Air bag kit # F89VV as-is, and you will not need any spacer.
  view full answer...
• Installation of Firestone Red Label Air Bags on 2012 Ford F-250 With Block Underneath Jounce Stop
  Installing the # F2703 on your 2012 F-250 will require moving the block in your picture. However, I'm not sure if it can be moved to the top of the jounce stop since we don't have any information on it and neither did Firestone. I recommend checking with the manufacturer before attempting to move it to the top. The other option is to completely remove it. If you are able to swap it with the jounce stop you can measure to see if a spacer will be required. You will need to measure the distance...
  view full answer...
  
• What Size Spacer Do I Need for a Firestone Air Bag System on a Lifted Chevy Silverado?
  I would be happy to help you but there are so many different lift options its going to require you to take some measurements of your Chevy Silverado 2500's suspension. Most lift kits don't lift the same amount in the front as they do the back, so a 3-1/2" lift may only have 1"-1-1/2" of lift in the rear. The most accurate way to tell what spacer is needed is to measure. I attached a photo that shows where to measure, and the size of lift spacer needed. You'll want to make sure that your...
  view full answer...
  
• How to Determine Correct Spacers For Firestone Air Bags on 2016 Chevy Silverado w/ 3-1/2 Inch Lift
  There are likely going to be some spacers that will work for you, though to find the correct ones you'll actually need to do some measuring during the install on your 2016 Chevy Silverado 2500 of the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs # F2709. The reason for that is a 3-1/2 inch suspension lift does not necessarily mean your truck was lifted 3-1/2 inches. Additionally, I took a look at the instructions for a Rough Country 3-1/2 inch leveling kit and it said it...
  view full answer...
• Is Spacer Needed to Install Helper Springs on a 2007 Toyota Tundra with 1 Inch Lift
  If the 1 inch lift at the back of your 2007 Toyota Tundra increased the distance between the frame and the axle, also by 1 inch, then you might need a spacer kit. The shortest spacer kit for Firestone Ride-Rite air bags is 1-1/4 inches, # F2536. What I recommend is to go with Timbren springs, # TTORTUN4. Then you could add a couple of 1 inch spacers, # A25723-90AH00, which are 1 inch.
  view full answer...
• What Size are the Air Bags for Firestone Ride-Rite Red Label for a 2019 Ram 2500
  For your 2019 Ram 2500 the correct Firestone Ride-Rite Red Label air bag kit is part # F2706. The air bags in the kit have a maximum diameter of 7.52 inches at the widest point, compressed height of 3 inches, and extended height of 8.91 inches. However if your truck is lifted a spacer may be required to make up for the additional height. I have attached a photo of where to measure, and once you find that distance you can choose from the following if a spacer is needed. 6-1/2" - 7-1/2"...
  view full answer...
  
• Swapping Old Firestone Air Bags From A 2018 Chevy Silverado To A 2020 Ford F-250 Super Duty
  Thank you for the pictures you sent to help verify the 6401 air bag used in your old # F2400 kit. Unfortunately the compatible kits for your 2020 Ford F-250 Super duty use the 8397 and 6397 air bags so you won't be able to just swap out the brackets to reuse them on the newer truck. Instead I recommend installing the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F35FV. These 5,000-lb Capacity Ride-Rite air springs will enhance your factory suspension for safety...
  view full answer...
  
• Do I Need to Use Spacers with my Firestone Ride Rite Air Bags on a 1998 Toyota Tacoma with Body Lift
  No. Because a body lift does not change the suspension height at all-more specifically the distance from the frame to the axle- you won't need to use Lift Spacers # F2536 when installing a kit like the Firestone Ride-Rite # F2304.
  view full answer...
• Lift Spacers Needed For a 2019 GMC Sierra 1500 With 2" Lift and Firestone Ride Rite Air Springs
  The 1-1/4" Spacers # F2536 for the Firestone Ride-Rite Air Helper Springs # F2609 are for measurements of 6-1/2" to 7-1/2" between the upper and lower mounting brackets. You will need to measure the distance between with the mounting brackets installed on your 2019 GMC Sierra Denali 1500 to ensure you get the correct size spacer. The 2" Spacers # F2366 are for measurements of 7-1/2" to 8-1/2" between the upper and lower mounting brackets.
  view full answer...
• How to Measure To Determine Correct Firestone Lift Spacers for Ride-Rite Kit on 2018 Nissan Frontier
  To determine if lift spacers are needed to install the Firestone Ride-Rite Air Helper Springs # F2558 on your 2018 Nissan Frontier SV 4x4, you'll need to measure the distance between the top and bottom mounting brackets (see photo). Make sure your truck has all four wheels on ground or is up on jack stands and there is no load on the bed. You will then select the right spacer using the following measurements: 6.5" - 7.5" distance between brackets - use 1.25" lift spacer # F2536 7.5" -...
  view full answer...
  
• Recommended Air Suspension Systems For 2004 Toyota Tacoma With 1-1/2 Inch Lift On Leaf Springs
  You are correct. The Firestone Ride-Rite Air Helper Springs, part # F2304 do require spacers like part # F2536 since you have a 1-1/2 inch lift on your 2004 Tacoma. This system has a load-leveling capacity of 4,800-lbs and helps reduce the strain on your suspension. The Air lift Air Ride system that is designed to work with your Tacoma is part # AL59537. This system has a load leveling capacity of 2,000-lbs. No spacers are needed with this system because the bottom bracket attaches directly...
  view full answer...
• Spacers Needed to Install Air Helper Springs on Lifted 2000 Toyota Tacoma
  To determine the size of spacer that you will need to install # F2304, you will need to measure the space between the bottom of the frame to the top of the axle. If this measurement is 6-1/2 to 7-1/2 inches you would need a 1.25 inch spacer set # F2536. The other spacer kit # F2366 would be used if the distance between the brackets is 7-1/2 to 8-1/2 inches.
  view full answer...
• Can Firestone Ride-Rite Air Helper Springs # F2703 Install on 2013 F-350 with 2-1/2" Leveling Kit
  The Firestone Ride-Rite Red Label Air Helper Springs # F2703 that you referenced will work great on your 2013 Ford F-350 4x4, even with the 2-1/2" leveling kit installed. Depending on the type of lift the kit provided, you may just need to add a spacer block to fill in the extra gap. If the kit only raised the body of the truck (and the suspension travel didn't actually increase) you don't need to worry about a spacer at all and the air springs will install and work perfectly as-is. If...
  view full answer...
  
• Will Firestone Ride-Rite Air Helper Springs # F2445 Fit 2014 Toyota Tundra with Leveling Spacer
  I spoke with my contact at Firestone and depending on how the leveling was done on your 2014 Toyota Tundra you may need an additional part or two in order for the Ride-Rite Air Helper Springs, # F2445, to work for you. If the distance from the leaf spring to the frame of your truck was increased, you will need Lift Spacers, # F2536. If the distance from the leaf spring to the axle was increased, you will need Axle Bracket Extension Kit, # F2506. This is a 2 inch extension, which is the...
  view full answer...
• What Size Spacer Block is Needed for a 2019 Chevrolet Silverado 2500 with a 3" Zone Lift
  For Firestone Ride-Rite Air Helper Springs # F2613 that fit your 2019 Chevrolet Silverado 2500, you will want to use the 1/4" Lift Spacers # F2536 due to the lift on your truck. Since you have 7" spacing between the upper and lower bracket, the 1/4" Lift Spacers # F2536 is correct because it is for spacing between 6-1/2" and 7-1/2". The 2" Lift Spacers # F2366 would be correct if the spacing between your upper and lower bracket was between 7.5" and 8.5".
  view full answer...
• Can Firestone Air Springs F2615 be Used on a 2020 Ram 3500 With a One-Inch Lift?
  Normally, vehicles with a lift would have to use spacers that are compatible with the air springs. However, with just a one-inch lift, you can install the Firestone Ride-Rite Air Helper Springs # F2615, without having to use lift spacers. Firestone does not even make spacers for a one-inch lift, with their smallest spacers coming in at 1-1/4", which are # F2536.
  view full answer...
• Recommended Firestone Air Spring Kit for 2017 Chevy Silverado 3500 with 1 Inch Lift
  The Firestone Ride-Rite Air Helper Springs - Rear Axle # F2709 referenced in your question is confirmed to fit your 2017 Chevy Silverado 3500. We have spoken to Firestone before and they state that on trucks that have just a 1 inch rear lift, a spacer kit really shouldn't be needed for installation and proper performance. In fact they do not even make a 1 inch spacer kit. Adjusting your air pressure will level your truck. If you install the springs and you find there is a bit too much...
  view full answer...
• Can Firestone Air Bag Kit F2550 Fit 2003 Ford F-350 with 1-1/2 inch Lift
  The Firestone air bag kit part # F2550 can be used on trucks that have 1-1/2 inch lift kits like what you have. If the lift is a body lift where the suspension height doesn't change at all you would be fine with just the # F2550. If the lift was a suspension lift that increased the height between the frame and the axle then you would need a spacer kit # F2536.
  view full answer...
• Lift Spacer Recommendation for Firestone Air Bag Kit on Truck with 1.5 inc Lift
  You are correct. Since you have a 1-1/2 inch "lift" on your truck you'd need the Firestone 1-1/2 inch spacer kit part # F2536 to take up that additional space.
  view full answer...
• Can Firestone Ride Rite Kit # F2709 Fit with 1-1/2 inch Lift Block
  Typically block lifts are body lifts which do not add distance between the axle and the frame. If that's what you have then the Firestone Ride Rite kit part # F2709 would fit as-is. If you do have a lift that adds distance between the axle and the frame you'd need a spacer kit like the part # F2536 which is a 1-1/4 inch spacer block.
  view full answer...
• Are Lift Spacers Needed For Air Bags with a 1 Inch Lift Kit on a 2018 Ram 3500
  If you are only installing a 1" lift on your 2018 Ram 3500, you most likely will not need to use a lift spacer at all with the Air Lift LoadLifter 7500 XL Air Helper Springs part # AL57595. In order to confirm this, you will need to measure the distance between the two air bag brackets once installed and then subtract the height of the air bag which is 7". I have attached a photo on this for you as well. The smallest spacer we offer is the Firestone Lift Spacer part # F2536 which is 1-1/2"...
  view full answer...
  
• Recommended Transmission Cooler And Suspension Enhancements For A 2011 Nissan Frontier
  I will first start out by addressing the additional transmission cooler you will want to help keep the transmission fluid temperatures at a safe level, while towing a 5,000 lb. trailer with your 2011 Nissan Frontier. As you mentioned, your Frontier is plenty capable of hauling this load, however, it is never a bad idea to aid your factory transmission cooler with an even larger one for optimal performance. I recommend looking at the Derale Series 8000 Plate-Fin Transmission Cooler Kit...
  view full answer...
• Can Firestone Air Bags Be Installed on a 2008 Toyota Tundra 4x4 with 1-1/2 Inch Lift
  Yes, you can still use Firestone Ride-Ride air bag helper springs # F2445 on your 2008 Toyota Tundra with 1-1/2 inch suspension lift. You will just need to add spacers # F2536 which are specifically designed for vehicles that have been lifted. I have linked a video showing an example installation of the air bags for you.
  view full answer...
• Spacer Needed for Installing the Air Helper Springs # F2445 on a 2012 Toyota Tundra with 1 Block
  We do have a variety of spacers that you can use to install the Firestone Ride-Rite Air Helper Springs # F2445 on your 2012 Toyota Tundra. I have attached a link to our selection for you to filter through. Since you said that you have a 1" space the closest lift we have is part # F2536 which is for vehicles with a 1-1/4" lift. With that being said, you will also want to check out the attached photo which has the ride height of the double convoluted air bags with a 4,800 lb capacity listed...
  view full answer...
  

Do you have a question about this Accessories and Part?