Cargo Roller for Front Runner Platform Racks - 19-1/2" Long

Video Transcript for Cargo Roller for Front Runner Platform Racks: The Breakdown

Hi everybody, Andy here with etrailer.com. Let's take a brief look at this cargo roller for your Front Runner roof racks. This cargo roller is going to help you load your kayak, canoe, building supplies, or other long and heavy items. This has a load rating of 88.2 pounds, and this rubber roller has a weather-resistant, maintenance-free, nylon-bearing housing, and this soft rubber surface is going to prevent damage to your items. Now, as you can see, on the side of these brackets we have one, two, three, four tie-down points for your straps with carabiners. And this is going to install on the rear or side of your Front Runner platform rack, as you can see there on your screen.

And this is going to be a relatively simple installation with the included hardware, and it can also be paired to handle sheets of plywood or gypsum board. Now, the brackets are black powder-coated steel and the roller shaft and nut caps are also black powder-coated steel, and they are gonna be rust-resistant. And this does include the brackets that we've been looking at already, and I have them loosely assembled here with the roller just to give you an idea of what this is going to look like. But you're gonna have all the hardware that you need to install this on your Front Runner roof rack. Also includes instructions to guide you through that installation process.

And just some overall measurements to kind of give you an idea of the size. Measuring from end to end, we're sitting right at about 19 1/2 inches long. And then the width, we are sitting right at about 3 7/8 inches wide. And then the overall height, we're gonna be sitting right at about 3 5/8 inches tall, and the unit itself weighs a little over four pounds. So that's gonna wrap up our brief look today.

I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.