bing tracking image
  1. Accessories and Parts
  2. Fulton
  3. Camper Jacks
  4. Trailer Jack
  5. Gear Parts
  6. Gears
Fulton Bevel Gear Kit - 1,500 - 2,500 lbs

Fulton Bevel Gear Kit - 1,500 - 2,500 lbs

Item # F0933306S00
lowest price pledge
Retail:$42.85
Our Price: $18.45
You Save: 57%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.42 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me
Kit includes everything you need to replace or repair the bevel gears on various Fulton marine and recreational jacks. 1-800-940-8924 to order Fulton accessories and parts part number F0933306S00 or order online at etrailer.com. Free expert support on all Fulton products. Guaranteed Lowest Price and Fastest Shipping for Fulton Bevel Gear Kit - 1,500 - 2,500 lbs. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (173)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Fulton Accessories and Parts - F0933306S00

  • Camper Jacks
  • Trailer Jack
  • Gear Parts
  • Gears
  • Fulton

Kit includes everything you need to replace or repair the bevel gears on various Fulton marine and recreational jacks.


Features:

  • Replacement parts fit Fulton marine and recreational jacks
    • Designed for use with Fulton jack models HD2500, TJ1055, TJ1057, TJ1222, TJ1255, TJD125, TJ122F, XP15/L/W/WC, and XPF15L
  • Kit includes gears, roll pins, washers and a handle bushing


Specs:

  • Gear Bevel: 5/8" thick x 1-5/16" wide
  • Pin Spring: 3/4" long x 1/4" thick 0.230
  • Washer: 1/2" inside dia x 1-1/4" outside dia
  • Spacer: 1/2" inside dia x.63 outside x 1-1/4" long 1.30
  • Groove Pin: 3/16.1875 thick x 1 long
  • Bushing Flanged: 1/2 inside dia x.70 wide x.94 long


0933306S00 Fulton Replacement Gear Kit




California residents: click here


Video of Fulton Bevel Gear Kit - 1,500 - 2,500 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Fulton 2500HD Trailer Jack Rebuild

Today we're going to be taking a look at how to rebuild the Fulton 2500-HD Marine Style Square Tube Jacks. Now these jacks are not that inexpensive and it's nice that we have a lot of individual components here so we can replace whatever is broken. We don't have to worry about going out and re-buying a completely new jack. We'll start here at the top, you see we've got a black cap that's held on by two screws. We offer that right here as a replacement part. That's going to be part number F0917504. Also, we're going to have our handle kit here.

It's got a flanged bushing and then there's a pin located inside that goes to the gear. Our handle is part number F0933305S00. Again, it's going to be our handle, our flange bushing and our pin. As we work our way down just a little further we're going to have our gear kit. Now our gear kit has some nice extra components.

It's got the extra bushing, threshed washer that's going to go down on top. It's got the spacer that's going to go between our gear. It's going to have the base pin, it's going to have the handle pin and then our lower and our side gear and it also comes with two new of the flange bushings just in case we need them during that rebuild. Now once we get below that, we're going to have our bearing. You'll see this is kind of a sealed bearing on the top. It's got a cap on it.

You want that to be facing up and that actually helps to make the water shed off of the bearing and that's going to ride on top of this threshed washer here, or threshed bearing there. You can see it's going to turn really nice and smoothly and that basically alleviates all of the friction that we have in our jack and it's going to help it to operate really nice and smoothly. There are going to be four bolts that hold the jack into place with a backing plate. If you've had any damage at all done to those, we do sell those as a replacement part as well. That part number is F500286. The first step is going to be get our cap off, that's going to sit over top of the gears and the bearings located inside. Use a quarter inch socket or bit driver or even a flat blade screwdriver if you want and once we have one backed out on the side, we'll kind of push up on that side, you can see the other one is just going to fit around that grease cert.

Inside there you'll see our gears, you're going to see the grease that came on it from the factory. We're going to wipe all of that out of the way and show you how to rebuild this. Now when you put everything back together, just want to make sure you use a good all purpose grease. It doesn't have to be a high temp grease or anything like that but you do want to make sure that it's good all purpose grease. Now with most of our grease out of the way, if we turn our handle, you're going to see two half moon cut outs. We've got one there and if I move the handle you can actually see the pin move up and down there. And then directly on the other side we'll have our other one. What I'm going to do is use a five-thirty-seconds punch. We'll line it up with that pin and I want to drive that pin down, once we have it started, we'll tilt it and then kind of drive it right over on that angle. We'll know it's fully out when we can move this handle up and down. Lift our handle out there. Now at this point if we're just replacing the handle, we can put that new one back down in. We'll line up our holes, put our pin back in and replace our cap so it's pretty straight forward. Now we're going to go a few steps further so let's rotate it over here. You'll see our gear laying here on the bottom. We'll take that out. Now both of our gears are going to be the same, for the bottom we're going to use the enclosed area for the pin to sit in and for our handle, we're going to use the pass through area. That base pin is just a little bit bigger but the gear is just going to sit right down on top of it. You can also see we've got that bushing there, which is one of the replacement parts and you've also got this small washer. Now this you're going to reuse. It doesn't really experience any wear. Just lift up on that base gear there. You can see it's going to come right off, again just the same thing as what the side gear was. Of course, these are brand new parts we're pulling out here. Your grease probably is going to look as nice and if you're replacing parts, one of them is going to show signs of failure. These are brand new, we're just going to replace them and put them right back in and put some new grease in and we'll be ready. You can see that base pin right here. We also have that as a replacement. That just floats, it just sits in the middle here. Now we're going to slightly pull the inner tube, the inner square tube which would be kind of what your drop leg is attached to and we're going to separate it from the outer tube. You see how that screw as I pull out on that, it's going to slide out. It's going to allow that plate to drop down. We're going to set it aside. On top of that plate, there's that flat washer and remember that's going to come in the gear kit replacement if you need to replace that. Then right down there we have that threshed washer and also our bearing. Now we can lift up our outer tuber here and that'll give you a good look at actually how the mechanism works. You see there's this screw and that just pushes down or pulls up on that leg causing it to go in and out of the jack so it's really, really hard to mess this up. This is a super strong screw where typical points of failure are going to be either the bearing or the gears or something like that. So let's go ahead and make sure we get some grease around screw there and we can start putting this thing back together. You're going to start by placing the threshed washer down on the screw and follow that up with our bearing. Now it's time to put our top plate in. One slot on the jack is going to be much wider than the other. We want to put the thicker part facing outward. You can see that thinner part, that's going to face inward. Just get it slid into position and you can see it's going to engage on that side. We can start the outer tube right back down over the inner tube and if we watch inside there, we'll see the screw is going to pass right through that plate. Now we're going to take our washer or threshed bearing and place that down on it. Once that's in place, we can slide that larger diameter pin in. Now this is just what they call like a floating pin so it's not going to take a bunch of force to get it in place. You just want it to be pretty much equal on each side that we can see exposed. Now we'll take one of our gears, we want to use the enclosed portion. We don't want to use the full pass through opening. We want to use that one and we'll slide that down and on, being sure that that engages the pin and you should notice that it's engaged because it doesn't turn freely. It has some tension to it. Put some more grease down in there. You remember we had our bushing, had that little washer on it so we can that put in position. Make sure that washer stays lined up. The grease is nice because it helps hold it in place and we're going to start to slide our handle through and as we do we want to have our gear kind of lowered down so it's lined up with our bushing. It's going to slide right on through. You can see kind of part of that hole there. We'll just rotate our jack so we can see half moon in the gears is going to line up with the hole that's in the handle. Now we just need to replace that pin that we drove out earlier. All right, we just want our pin to be about equal on either side. Doesn't necessarily have to be square but you do want it to be engaged fully so you have some tension on that pin. Now another little helping of grease, we'll work that around our gears there. Now one side of our cap needs to go around that grease sert. Other side, push down in. Now we can just reinsert that self-tapping screw. That's all there is to it. It only takes a few minutes and a few inexpensive parts and we can go through a complete rebuild process on a jack rather than actually having to purchase a brand new one. That will complete today's rebuild of the Fulton HD 2500 Marine Jack.


Customer Reviews

Fulton Bevel Gear Kit - 1,500 - 2,500 lbs - F0933306S00

Average Customer Rating:  4.8 out of 5 stars   (173 Customer Reviews)

Kit includes everything you need to replace or repair the bevel gears on various Fulton marine and recreational jacks.

- F0933306S00
by:

Gear kit fixed the problem. The instructions were for mounting a dolly wheel to the trailer. Had nothing to do with what I was doing. . There was a video on etrailer for the instructions so that worked out. Overall would recommend etrailer.



- F0933306S00
by:

Nice kit but not the gear I need for the handle of the trailer jack I have! The gears pictured the one on the left is the one from this kit the one on the right is the one I need.


Comments
If you could reply with the manufacturer name and model number of the jack you have, Id be happy to assist in finding replacement gears. Without that information, locating replacement parts will be very difficult.
-- Etrailer Expert Mike L - 06/12/2018


- F0933306S00
by:

I purchased the rebuild kit for the Fulton 2500 HD Trailer Jack and the installation went smoothly thanks to the great video tutorial featuring Eric. Thank you!



- F0933306S00
by:

Gear kit for Fulton trailer jack...product arrived on time....easy to install....video was very user friendly



- F0933306S00
by:

Perfect bearing replacement for a Fulton 2500HD. Need to reuse old washer since new washer is too thick and makes it impossible to install the groove pin.



- F0933306S00
by:

E trailer is always there when you need them most. Gr8 people, gr8 company !!!!!



- F0933306S00
by:

I now know where I will go to get my parts for my trailer needs. Thank you guys for the speedy delivery and great quality of parts.I will recommend you to everyone that I know.



- F0933306S00
by:

The purchasing experience was delightful. It was easy to follow to order product. the product was received in a timely matter. Which is a large plus. The product was of good quality, and fit properly. The only issue would be a vender issue, which is the the instructions are for mounting the jack to the trailer, not replacing gear set. Not all pieces in the package was for the model jack I have, but the pieces I needed were. Having been a mechanic for forty plus years allowed me to figure out the rebuild without instructions. All in all etrailer fulfilled my needs to the highest level.


Comments
Thank you for the follow up. The product worked as advertised and Ive had no issues with it. By being able to repair the jack, instead of buying a new one, I was able to save money. Thank you for your services. Should the need arise, I will not hesitate to use your products again.
Kirt - 03/16/2019



- F0933306S00
by:

Excellent product and received in a timely manner.



- F0933306S00
by:

This repair kit solved my problem. It’s much better than cutting out and welding in a new jack just because the retainer and pins were broken. When ordering it’s a little difficult to figure out if the kit will fit your particular jack. I might note that my jack is 16 years old and has jacked many loaded trailers



- F0933306S00
by:

After one of the gears on my jack bit the dust, I ordered this kit and had it up and running in no time.



- F0933306S00
by:

Got my part in a timely manner. Easy fix. My jack is backing working order. Thank you.



- F0933306S00
by:

I was not aware when I ordered that a video was available. After I now watched the video I notice that I have one part in the wrong way, so I will have to take it apart again and change the part where the handle goes thru and insert it from the inside instead of from the outside of the tube.



- F0933306S00
by:

Second time ordering with etrailer and both times they were on time and everything was as ordered. I'll keep using etrailer for all my needs.



- F0933306S00
by:

Ok, so I put the wrong review in for another part. This gear kit is fantastic! Saved me A LOT of money! If I had to replace my hvy duty Fulton 2500 lb boat jack it would cost me about $200.00. By this replacement kit, it took me 10 minutes to replace the gears and pin in the crank and saved me over $150.00/$175.00! I called my local Fulton dealer and they were selling this repair kit for a lot more as well! Quick service and shipping! Took me 2 days to get it by regular mail. Great job and thank you!



- F0933306S00
by:

Not having to replace the jack is great. I was able to get the new parts in but still found a bit of lateral 'play' in the plate. Couldn't figure out how to eliminate this other than to hold the plate from the outside. What I would suggest to etrailer re their video to use an old jack for the demo. I don't think there would be too many new jacks as in the video that would need this replacement. My jack is 15 years old and square shape and not quite the same as the round tube type jack etrailer used.


Comments
all is well
Paul L - 07/26/2018



- F0933306S00
by:

Thank you for the follow up. Unfortunately, I purchased the incorrect rebuild kit. I beleive my swivel jack is the 1000 lbs jack and not the 1500-2500 version. The gears, pins and hardware are too large for my current unit. Can you advise what my options Are? I may be looking to purchase a new unit for next boating season as well. y current unit is a weld-on unit so I am assuming if I weent to a 1500Lb unit it would fit the current hardware that is welded on the trailer? thanks for your assistance.


Comments
In order to make an accurate suggestion for replacement parts, Ill need to know the manufacturer, model number and capacity of the jack you currently have. Once thats known, I can search for replacement parts.
Mike L - 10/19/2018



- F0933306S00
by:

This is a great find. I search with my local trailer and auto shops for this kit and you were the only store that carried it. It arrived in 4 days as promised and the gears were exactly what I needed. I rebuilt my jack and it is back on my boat trailer for fishing the next day! Thank you so much


Comments
The repair kit works perfectly!
Bchichi - 04/28/2016



- F0933306S00
by:

Broke bevel gear by cranking handle to raise trailer too high. My error. Ordered replacement parts and received via mail within a few days, replaced broken bevel gear in approximately 15 min. Easy repair. Trailer jack fixed for about $15 vs. buying a whole new jack for much more. Note: Be careful when cranking this jack up - as it will crack the bevel gear if raised too high (beyond the height it was designed to lift). Suggestion: Engineers who designed this Fulton jack need to rethink a better way to stop overcranking, before the gears break apart!



- F0933306S00
by:

Parts were exactly what the jack needed and is working like new. Thanks



- F0933306S00
by:

Parts and price was great. Best of all was the how-to video on how to rebuild the jack!!!!



- F0933306S00
by:

The rebuild kit for my trailer tongue jack was easy to install. The fit was perfect, quality excellent, price was no comparison for a new one. Now that I have dismantled it, I suppose it will be more likely to maintain this better, we shall see. I have operated it several times, works perfectly. eTrailer.com has filled several orders for me and my family. The service is always excellent, and the only time we had an error, they corrected it immediately. The effort they put in was surprising, I appreciate the amazing support nowadays.



- F0933306S00
by:

I used this gear kit to repair an older Fulton jack that I popped the gear on when I tried to lower the jack (going the wrong way with the handle). Yes it was totally my fault! Fortunately, this gear kit fit perfectly, came with a complete set of instructions, and the entire assembly was replaced in less than 10 minutes. It would have been quicker...but it was all new to me, and I didn't want to lose any parts down the jack. (Note- I had to call Fulton to find the correct gear replacement, as this kit was for the 2500# jack, and I have a 1200# jack....Fulton gave me the correct information I needed....and I ordered from etrailer.) I also ordered the wheel, which is yet to arrive as it was on back-order, but I knew that before I ordered and that's fine, and the cap fit perfectly.Parts arrived in 2 days...awesome response, packaging, and correct parts.Perfect transaction. Could not have worked better. Thanks etrailer-we're operational again. Oh...and the jack has never worked better.



- F0933306S00
by:

The product I received did not fit the jack I have. I had tried to do a good job of describing it to your rep. but it wasn't the correct part. It is a fulton magnum jack that came on my Ranger boat and I was told that I couldn't purchase a new one and was hopeful that a rebuild kit was available. I'm surprised that no one was familiar with the model......L. Parks



- F0933306S00
by:

Product worked as advertised to repair a Fulton HD 2500. Unfortunately, the initial shipment of package was missing a spring pin for the upper gear, but I purchased a suitable replacement pin at a local hardware store. I notified eTrailer of the missing pin just to let them know so other customers would not encounter the same problem. Unsolicited, they send an entire replacement kit at their expense. Great customer service.


25
173
Show More Reviews

See what our Experts say about this Fulton Accessories and Parts



  • How to Determine what Model Fulton Jack You Have
    I just got off the phone with my contact at Fulton and he informed me that there is not usually a model number listed anywhere on a Fulton jack. He said you might be able find a weight capacity listed on the jack and then compare it and what the jack looks like to other Fulton jacks and you should be able to determine what jack you have. I attached a link to a page that has all of the Fulton jacks we offer.
    view full answer...
  • Replacement Gear Kit for a Fulton Magnum Series Square Trailer Jack
    I spoke with my contact at Reese and he stated that it is possible that the bevel gear kit # F0933306S00 will fit your jack. He said that if the outer tube is 2-1/4 inches wide then it is the correct kit. It will fit certain 1500 to 2500 pound jacks. I have been told that it also fits up to 3500 pound jacks.
    view full answer...
  • Replacement Bevel Gear Kit for a Fulton Magnum 2500 Trailer Jack
    I spoke with my contact at Reese and he stated that it is possible that the bevel gear kit # F0933306S00 will fit your jack. He said that if the outer tube is 2-1/4 inches wide then it is the correct kit. If the jack outer tube as a different measurement then I will need more specific information about the jack to determine the correct kit if available. I will need to know the type of jack, swivel, A-frame, etc, and if it is a top or side wind.
    view full answer...
  • Replacement Bevel Gears for a Fulton Magnum Series 3.5K Trailer Jack
    I spoke with my contact at Fulton and he stated that is your jack has a 2-1/4 inch outer tube width then you can use bevel gear kit # F0933306S00. If the outer tube is any other size there are no gear options available.
    view full answer...
  • Replacement Gears for a Fulton Magnum 3500 Pound Trailer Jack
    I spoke with my contact at Fulton and he stated that if your Magnum 3500 pound jack has a 2-1/4 inch outer tube width then you can use bevel gear kit # F0933306S00. If the outer tube is any other size other than 2-1/4 inches then there are no gear options available.
    view full answer...
  • Jack Replacement Parts for Unit on Miller Offset Disc Harrow
    I checked the Kuhn website for any details about the jacks supplied on their offset disc harrows but none was provided. I did call and speak to a technician there who advised that the jacks they supply on their equipment are Fulton brand products made by Cequent Performance Products, maker of many brands of towing and trailer products. Here at etrailer we do carry Fulton products and the repair kits for many of their jacks. I linked you to a page for the three Fulton jack gear kits we...
    view full answer...
  • Replacement Bevel Gears for Fulton Magnum Series 1200 lbs Trailer Jack
    According to my contact at Fulton if your jack has a 2-1/4 inch outer tube width you can use bevel gear kit # F0933306S00. If the outer tube is any other size there are currently no gear options available.
    view full answer...
  • Replacement Bevel Gears for a Fulton F2 Twin Wheel Swing-Up Jack
    Yes, the part you will need for your Fulton F2 jack is the Fulton Bevel Gear Kit, item # F0933306S00, that you selected. This kit is the correct replacement gear kit for all of the F2 series jacks.
    view full answer...
  • Replacement Bevel Gear Kit Recommendation for a Fulton 25k HD Marine Jack
    I spoke with my contact at Fulton and he informed me that you would need a Fulton Bevel Gear Kit, part # F0933306S00, like the one you referenced. He also said this kit is very easy to install and only took him a couple minutes to do when he did one at their facility.
    view full answer...
  • Which Replacement Bevel Gear Kit ill Fit a 1,600 Pound Fulton Swing Up Trailer Jack
    I spoke with my contact at Fulton and he said that the replacement gears you will need is the Fulton Bevel Gear Kit, # F0933306S00, that you have selected. These will fit your 1,600 pound swing up Fulton trailer jack.
    view full answer...
  • Trailer Jack Repair or Replacement Parts
    The nut you are seeing in the inner pipe is not designed to be replaced. It sounds as if your jack was wound past is working limit and either broke or ruined the threads on the lift rod. You will need to replace the jack, if this is the case. The parts you referred to, # F0933306S00, are located in the top of the jack and can be replaced. If you open the top of the jack and find these parts damaged, send me the make-model number of your jack and I will be glad to help determine the correct...
    view full answer...
  • Installing New Gear Kit Install Instructions for Fulton 1500 Jack
    Installing the gears is fairly easy, You will need to remove the cap at the top of the jack. The handle and gear are held in place with a roll pin that will need to be removed. You can then remove the handle, square block and gear. You can then remove the bottom gear by lifting it out. If the bottom roll pin is damaged remove it also and the washer can be replaced after removing the lower pin. When replacing the bottom gear on the roll pin be sure that the slotted portion of the gear is...
    view full answer...
    Image 1 for
  • How is the Fulton Bevel Gear Kit - 1,500 - 2,500 lbs Installed
    We don't have an install video for replacing the gear kit part # F0933306S00 that you referenced but I can walk you through the process. Installing the gears is fairly easy, You will need to remove the cap at the top of the jack. The handle and gear are held in place with a roll pin that will need to be removed. You can then remove the handle, square block and gear. You can then remove the bottom gear by lifting it out. If the bottom roll pin is damaged remove it also and the washer can...
    view full answer...
    Image 1 for
  • Are Fulton Bevel Gears Available for Fulton Magnum Series Jacks?
    We do have a kit which may work for you, the Fulton Bevel Gear Kit - 1,500 - 2,500 lbs # F0933306S00. This kit is going to work with Fulton jack models Fulton jack models HD2500, TJ1055, TJ1057, TJ1222, TJ1255, TJD125, TJ122F, XP15/L/W/WC, and XPF15L. I've added a link to a video review of this product for you to take a look at.
    view full answer...
    Image 1 for
  • Fulton Jack Replacement Bevel Gear Kit
    Depending on the model of Fulton Jack, we have the Fulton Bevel Gear Kit - 1,500 - 2,500 lbs # F0933306S00. This is the correct fit if you have a 1600 lb jack. I've attached a video of this installation for you.
    view full answer...
  • Fulton 1500 lb Trailer Bevel Gear Dimensions F0933306S00
    The Fulton Bevel Gear Kit # F0933306S00 that we carry is for jacks from 1500-2500 lbs. There are a number of model numbers the kit works with but since you don't have the model number you may be able to use the parts measurements to determine if it will work for your jack. The included parts are: Gear Bevel: 5/8" thick x 1-1/4" wide Pin Spring: 3/4" long x 1/4" thick 0.230 Washer: 1/2" inside dia x 1-1/4" outside dia Spacer: 1/2" inside dia x.63 outside x 1-1/4" long 1.30 Groove Pin: 3/16.1875...
    view full answer...
    Image 1 for
  • Replacement Bevel Gears for 2500 lbs. Fulton Trailer Jack
    The Fulton Bevel Gear Kit # F0933306S00 that we carry is for jacks from 1500-2500 lbs. There are a number of model numbers the kit works with but since you don't have the model number you may be able to use the parts measurements to determine if it will work for your jack. The included parts are: Gear Bevel: 5/8" thick x 1-1/4" wide Pin Spring: 3/4" long x 1/4" thick 0.230 Washer: 1/2" inside dia x 1-1/4" outside dia Spacer: 1/2" inside dia x.63 outside x 1-1/4" long 1.30 Groove Pin:...
    view full answer...
    Image 1 for
  • Gear Kit Recommendation for Fulton Magnum Trailer Jack
    I spoke with my contact at Reese and he stated that it is possible that the bevel gear kit # F0933306S00 will fit your jack. He said that if the outer tube is 2-1/4 inches wide then it is the correct kit. Based on the dimensions you listed the gears of this kit are very close to what you measured. The bevel of the kit is 1/16 inch smaller in diameter and right at the same thickness.
    view full answer...
  • Replacement Gear Set for Fulton Jack with 1500-lbs Capacity
    We may have a solution for you on this, but it's tough to be sure without knowing exactly what model jack you've got. The Fulton Bevel Gear Replacement Set # F0933306S00 is designed for use with Fulton jack models: HD2500, TJ1055, TJ1057, TJ1222, TJ1255, TJD125, TJ122F, XP15/L/W/WC, and XPF15L; all of these models have a capacity of between 1500-lbs and 2500-lbs, which would be in line with your trailer's tongue weight, so there's a good chance these would work. I've gone ahead and provided...
    view full answer...
  • Which Gear Kit Fits Fulton 1,600 lb Trailer Jack
    I spoke with my contact at Fulton and he said that the replacement gears you will need is the Fulton Bevel Gear Kit, # F0933306S00. These will fit your 1,600 pound swing up Fulton trailer jack.
    view full answer...
  • Fulton Trailer Jack Replacement Bevel Gear Kit for 1,500-2,500 lbs Jacks
    The Fulton Bevel Gear Kit item # F0933306S00 fits various models of Fulton 1,500 - 2,500 lbs jacks. Without knowing your specific model I can not say for certain if this will fit your jack. However, I can supply you with the measurements for the parts in the repair kit. Gear Bevel: 5/8" thick x 1-1/4" wide Pin Spring: 3/4" long x 1/4" thick 0.230 Washer: 1/2" inside dia x 1-1/4" outside dia Spacer: 1/2" inside dia x.63 outside x 1-1/4" long 1.30 Groove Pin: 3/16.1875 thick x 1 long Bushing...
    view full answer...
  • Rebuilt Kit for Fulton F2 Trailer Jack
    For the Fulton F2 jacks we do have the repair kit part # F0933306S00 which replaces the bevel gears.
    view full answer...
  • Fulton Bevel Gear Kit Recommendation for a 1,500 lb Capacity Jack
    I spoke with my contact at Fulton and he informed me that you would need a Fulton Bevel Gear Kit # F0933306S00. Even though the title of this product says it is for a 1,200 lb jack it would be the correct kit for your 1,500 lb capacity jack.
    view full answer...
  • How to Identify Correct Replacement Internal Parts for Fulton Square Jack
    We do offer replacement parts for Fulton jacks, including the square tube type. These parts are not always a universal fit, so you will need to order replacement parts that are rated correctly for your particular Fulton jack. Your jack model number and weight capacity should be either stamped on the jack tube or printed on a label attached to the jack. As examples, Fulton Bevel Gear Kit # F0933306S00 fits a range of their jacks including models TJ1055, TJ1057, TJ1222, TJ1255, TJD125,...
    view full answer...


< Previous



Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video by:
Kathleen M
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Randy B
Installed by:
Randy B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.