Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Install a Fulton F2 jack onto your trailer's existing Fulton XP10 or XP15 jack mount. Simply bolt this adapter plate onto your welded-on mount. Sharkskin finish resists corrosion. 1/2" Pull pin hole.
Features:
Specs:
This jack adapter plate quickly bolts onto the Fulton XP10 or XP15 mount that is welded onto your trailer, so you can easily attach a Fulton F2 jack (sold separately). Simply remove your old jack from the XP mount and bolt on this adapter plate in its place with the included hardware.
Installation
To install the Fulton jack adapter kit, first you will need to use a 3/4" wrench to remove the locknut from your existing XP jack swivel assembly.
Install the adapter plate onto the jack mount so that the letters TOP are legible as shown. Then make sure the plate is seated in the welded mount and secure it using the included locknut. Tighten the locknut to 65 - 75 ft-lbs.
Attach your F2 jack to the adapter plate with the 3/8" cap screws and lock washers as shown in the diagram above. Tighten these screws to 25 - 35 ft-lbs.
Sharkskin Coating for Corrosion Resistance
This plate is coated with Fulton's Sharkskin finish to resist corrosion, making it ideal for your boat or snowmobile trailer. Sharkskin products undergo a test in which they are sprayed with a 5-percent salt solution to determine corrosion resistance over time. These products are able to withstand 1,200 hours of constant exposure to the saltwater mist. This 1,200-hour salt spray rating indicates that a product is not only durable enough to last in freshwater environments, but it can also be used on trailers that come into contact with saltwater.
This Sharkskin finish is also self-healing. By minimizing the effects of any scratches that may occur, Sharkskin helps keep your adapter plate looking like new.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (39 Customer Reviews)
Install a Fulton F2 jack onto your trailer's existing Fulton XP10 or XP15 jack mount. Simply bolt this adapter plate onto your welded-on mount. Sharkskin finish resists corrosion. 1/2" Pull pin hole.This adapter, coupled with this tongue jack part # F1413060334 were just what I needed to upgrade/replace my bent trailer jack. jay at etrailer.com was great to work with!
Spot on! What I needed with fast shipping. Will buy from again.
Very heavy duty plate. Since I had to return the jack didn't need the plate.
Does EXACTLY what it is advertised to do. It was delivered very quickly and I couldn't have asked for a better experience.
I upgraded to the Fulton F2 and had an old center lock Fulton jack on my trailer. After failing to install the F2 with the included hardware (I did not order from etrailer) I did a quick Internet search and luckily came across Etrailer.com. Found this adapter and my problem was solved.
Existing EZ Loader trailer did not have a center hole cut. Drilled hole added washer, lock washer nut then locking nut for center. Lined up perimeter holes w/ jack holes tightened down and has worked like a CHAMP!!
Scott
3/22/2022
Great product!! Heavy Duty and sturdy! Buy with confidence!
Just what I needed to attach my new Fulton F2 trailer jack with single bolt center mount. Product is heavy duty - I am sure it will last longer than the jack or trailer!
Stuart
5/4/2022
So glad Fulton doesn’t use cheaper material for this part. Super happy with purchase.
The plate bolted right on to the existing plate that was welded to the trailer. The entire process took less than ten minutes to have a new F2 jack bolted on and ready to go.
Mike
8/30/2016
it is great never had one problem with it F2 Jack or the plate.
This product worked beautifully for my application. I fit well and allowed me to upgrade the older and flimsier Fulton jack to an F2 jack. My big complaint is that the threads of the plate were not finished well on the face-side, and I was unable to start the studs on two of the 4 holes without risking crossthreading. Since I didn't have a threadcutting tool, I had to run the studs through from the backside and use the studs and socket wrench to force-cut the final thread in the plate. Fortunately I didn't break off a stud. Once I had done this, I was able to start the thread from the front and tighten the new jack into place. Poor quality control on that aspect, but otherwise fit very well and did the job.
The new trailerjack arrived in two days after placing the order and the mounting process could not have been easier. Everything fit perfectly and I could not be happier. Great job etrailer! The help that I received from the sales rep (Adam) was very helpful in insuring that I got the right parts. If needed, I will definitely use this company again.
This adapter plate is just what is needed for the F2 jack install. it even comes with hardware. The adapter is threaded so it doesn't need nuts. It's also half the price of all the other adapters out there. way to go Etrailer for offering a easier, less expensive option.
This adapter plate is a life saver. Totally worth the money vs paying to have the old mount cut off and a new one welded on. I was able to put the jack on and get it all adjusted in 20 minutes.
Adapter and F2 Jack worked as expected. A big improvement from factory trailer jack.
Worked perfectly on my Mastercraft trailer to adapt the Fulton F2.
Perfect fit for my Moomba LSV Boatmate trailer. Excellent customer service. Thanks again etrailer.com.
I took off an older, flimsy jack that had the single bolt install, and used this adapter kit for the F2 that I bought. Installed quickly and easily.
We are waiting for the Replacement Hardware Kit to arrive so we can get the new jack mount on the boat trailer.
This adapter plate worked for my conversion. There is more slop in it than I would like to see, but it does the job.
Just what I needed and arrived quickly. This is the only and best way to replace a switch g up boat jack. No welding need just bolts right on.
Worked as described
Great Peoduct and easy install! Highly recommended! Worked perfectly!
Product was delivered on time and better then expected!
Good part, used u bolts that came with jack. Will use it later.
great
Shery was super helpful and the product bolted right on. So easy...!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kris
6/17/2016
Everything is as it was when I but the product. Works as if it were new.