InfiniteRule Locking Pins for Lock N Roll Articulating Hitch for 2" Hitches - Qty 2

Video Transcript for Review of InfiniteRule Locking Pins Lock N Roll Articulating Hitch 2" - IR59FR

Hi everybody, Andy here with etrailer.com, and today, we're taking a look at these InfiniteRule Locking Pins for your Lock N Roll articulating hitch for the two inch hitches. Now, these heavy-duty, dust resistant, stainless steel hitch locks provides superior security as they replace the standard pins for your Lock N Roll articulating hitch with two inch receiver. The flush design helps deter theft, and this short pin, the hitch lock is going to secure your articulating coupler to your two inch trailer hitch, this long pin secures the trailer and coupler to your articulating coupler. They feature, as you can see here, this weather resistant tethered dust cap to keep water and debris out of the key ways, and the lock cores are keyed-alike, and these two keys are included. Now, just to show you how these work, you would just simply remove the dust cap, and then you would take one of the keys and insert it, and then you would just turn this like you are loosening a bolt, so you would just keep turning this, and then once it is sufficiently loose, you would remove the head from the pin as you see here, and if you look here, you see that there is an O-ring to protect the internal components from dirt and grime. Then once you run this through the hole of what you are securing, you would just replace the head and then tighten the key like you would a bolt, and then once it's tight as it is here, you're just going to back off a little bit with the key to one of the notches here and line that up to the notches, and the key just comes right out and then your pin will be secure, and the item that you're securing will be secured in place.

Put your cap back on to protect the key, the key way, then you will be good to go. Now, these are made in the USA, and they have a safe working load of 7,000 pounds. And let me give you some overall dimensions here. Just looking at the overall length of the long pin, we're sitting right at almost seven inches, 6 7/8 inches long, and then the inside pin length or the span, I'm gonna be measuring from here to here, we're sitting right at 4 1/8 inches long inside that span, and then the pin diameter is a half of an inch. And then on the shorter pin, the overall length is sitting right at 5 1/4 inches long, and again, the measurement of the inside pin length or that span, we're sitting right at 2 5/8 inches, then that pin diameter is gonna be 5/8 of an inch.

Well, that's gonna conclude our look today at these InfiniteRule Locking Pins for Lock N Roll articulating hitch for two inch hitches. Again, my name is Andy, thank you for joining me..