bing tracking image
  1. Accessories and Parts
  2. Inno
  3. Watersport Carriers
  4. Load Assists
Inno Kayak Lifter Load Assist - Clamp On - Side Loading - 90 lbs
Inno

Inno Kayak Lifter Load Assist - Clamp On - Side Loading - 90 lbs

Part Number: INA453
In Stock
$152.17
Retail:$241.50
You Save: $89.33
Accessories and Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me
This lift assist allows a single person to easily load a kayak onto a roof rack. Swing-out arm holds your boat upright - away from your vehicle - as you load it, and it stores on your crossbars when not in use. Easy, clamp-on installation. 1-800-940-8924 to order Inno accessories and parts part number INA453 or order online at etrailer.com. Free expert support on all Inno products. Great prices and Fastest Shipping for Inno Kayak Lifter Load Assist - Clamp On - Side Loading - 90 lbs. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (17)
  • Q & A (0)
  • Photos

Inno Accessories and Parts - INA453

  • Watersport Carriers
  • Load Assists
  • Inno

This lift assist allows a single person to easily load a kayak onto a roof rack. Swing-out arm holds your boat upright - away from your vehicle - as you load it, and it stores on your crossbars when not in use. Easy, clamp-on installation.


Features:

  • Load assist makes it easy for one person to lift a kayak or canoe onto a roof rack
    • Eliminates the need for a second set of hands while loading
    • Takes the strain out of lifting your boat onto the roof
  • Swing-out arm lets you load boat from the side of your vehicle
    • Helps protect boat and vehicle from scratches and scuffs
    • Secures in stored position with ratcheting strap
  • Board pads (INA771 - sold separately) help protect your kayak during loading
  • Tie-down straps (sold separately) secure boat to the roof rack
  • Easy, clamp-on installation to most crossbars
  • Lightweight, rustproof aluminum construction with silver powder coat finish


Specs:

  • Application: round, square, aero, elliptical, and most factory crossbars
    • Maximum crossbar dimensions: 3-1/2" wide x 1-1/8" tall
    • Crossbar spread: 27" - 39"
  • Weight capacity: 90 lbs
  • Swing-out arm length: 18"
  • Base bar length: 43"
  • Weight: 8.8 lbs
  • Limited lifetime warranty


Inno Kayak Lifter dimensions

Inno Kayak Lifter

The Inno Kayak Lifter allows one person to easily load a kayak or canoe onto a vehicle's roof rack. The swing-out arm lets you load your boat away from the side of your vehilce to help avoid scratches and dings, and it stores on your crossbars when not in use. The load assist is constructed of rustproof aluminum, and it installs without tools on most crossbars.


Quick and Easy Installation

Inno Kayak Lifter clamp

The load assist installs easily on most crossbars - no tools required. Simply place the load assist on your crossbars with a mounting bolt on either side of the bar. Thread the mounting bracket onto the ends of the bolts - under the crossbar - and secure it in place with hand knobs.


Simple, One-Person Loading

Inno Kayak Lifter arm

The swing-out arm lets a single person easily load a boat onto the roof of a vehicle. To load, rotate the arm out and away from the base bar on the side of your vehicle.


Inno Kayak Lifter in position

Lean your kayak or canoe against the arm. lift the rear end of the boat up so that it is level with your roof rack, and set it on your vehicle's rear crossbar. Use the back end of the boat to lift the front end and pivot it into place on your vehicle's front crossbar. Once in place, secure your load with tie-down straps and bow/stern tie-downs (sold separately) to secure the kayak to your crossbars and to your vehicle. Board pads (sold separately) protect your boat from scratches during transport.


Inno Kayak Lifter secured

Once your kayak is loaded and secured, simply rotate the arm back into the stored position and secure it with the integrated ratcheting strap.



INA453 Inno Kayak Lifter Load Assist - Clamp On - Side Loading - 90 lbs

Installation Details INA453 Installation instructions



Customer Satisfaction Score:


Customer Reviews

Inno Kayak Lifter Load Assist - Clamp On - Side Loading - 90 lbs - INA453

Average Customer Rating:  4.5 out of 5 stars   (17 Customer Reviews)

This lift assist allows a single person to easily load a kayak onto a roof rack. Swing-out arm holds your boat upright - away from your vehicle - as you load it, and it stores on your crossbars when not in use. Easy, clamp-on installation.

by:

I just finished building a cedar strip canoe and needed something that would help me get it on the roof rack without causing blemishes to the canoe. This was perfect for giving me the extra hand to load onto the roof rack of my full size SUV.

John

6/18/2022

Works great! After 200 hours of building a cedar strip canoe, I wanted some security of not having it slide off to the side while loading onto the roof rack.



by:

Still working and offers a big helping hand when trying to get my kayak up onto my j-hooks



by:

Works great so far putting a 75 lb fishing kayak on my roof.



by:

Does not work with my rack. Can I return it? Just an observation that device needs a longer rest for kayak otherwise kayak will scratch side of vehicle during loading. The device could not fit on my roof rack. There is not enough clearance on my roof rack to attach the mounting brackets. Device is not defective and was not mounted on the car or used at all.

Etrailer Expert

Katrina B.

4/26/2022

Often times you will need a slightly longer crossbar that overhangs in order to use load assist and give you more clearance from your vehicle. We recommend using a crossbar that overhangs at least 4 inches length past the feet or side rails.



by:

It sort of worked - but lifting a 70 pound kayak onto a Jeep was still an iffy proposition. So I have recently bought a Thule Hullavator - hugely better and hugely more expensive). So this item has been retired. The Inno lifter was never all that confidence inspiring - sagged when the weight of the kayak was put on it, making me think that a failure was imminent. It never failed but it was just too flimsy to really count on it.



by:

What a great purchase. My Kayak is slightly over 70 lbs, I'm older and short so getting a Kayak on top of our SUV was becoming a challange. The Inno Kayak lifter changes all that. Very pleased. Also the shipment arrived much quicker than I expected.

Roger S.

4/4/2020

Im still extremely pleased with this purchase. Ive got a lot of use with this.



by:

Easy to install and works for loading a 17 foot aluminum canoe without help from others.



by:

The right product, delivered quickly, minor problems resolved immediately, excellent customer service. Cannot think of any reason why I would not consider this company 1st when buying anything for my vehicles.



by:

Works very well I am able to load 16 foot 57# kayak on top of truck by my self



by:

This installed in minutes and saves so much trouble when loading a kayak! Very happy with the purchase. 10/10 recommend.



by:

Worked like a charm!...I put a tandem Hobie mirage on top of a Jeep jk no problem man?? Ps . I’m 5’6” short and 61 years old ??



by:

Looks great ! Feels sturdy and well made....... not putting it on the car for a while.... it’s actually snowing in Upstate NY today !



by:



by:

super easy to put on



by:



by:



by:


17
17

See what our Experts say about this Inno Accessories and Parts

  • Kayak Load Assist Options to Work with Thule J-Style Cradles
    Hey Mark, thanks for reaching out! We have a great selection of kayak load assists, but the only thing remotely close to a winch that I can think of is the Malone Kayak Hoist # MPG346, which is for kayak storage. Since you're already using Thule J-Style cradles I recommend checking out the Rhino-Rack # RR-RUSL or Inno # INA453 which are both universal-style load assist that mount directly to your crossbars. If you need more help than that, we have the Thule Hullavator Pro # TH898 which...
    view full answer...
  • Will The Malone MAL84AR Fit A 2024 Outback Wilderness And Work With The INA453 Load Assist
    Yes, the # MAL84AR will indeed fit your 2024 Subaru Outback Wilderness. The 58" crossbar will provide plenty of overhang for the load assist # INA453 to work normally.
    view full answer...
  • Kayak Load Assist That Works With Inno Aero Crossbars
    We do have a kayak load assist that will work with your Inno aero crossbars, though the Rhino-Rack # RR-RUSL is not a fit for these crossbars. Instead, what you will need is an option from Inno: - Inno Kayak Lifter Load Assist # INA453 This is the same type of side-mounted load assist as the Rhino-Rack option, but mounts with clamps that make it a universal fit on all crossbar types.
    view full answer...
  • Ideas for Making Loading Kayaks Easer on 2007 Hyundai Santa Fe
    Realistically the best product we can offer would be to go with a different kayak carrier that has more of a load assist like the Inno # INA453 or to use a tire step like part # HE4040 so that you can get up higher to load and unload easier. Or you can install a 2 inch hitch like the part # 75471 on your 2007 Hyundai Santa Fe and then use an upright assist like the Rhino-Rack T-Load # RTL002 which installs in the hitch and can til back to help set on the bars.
    view full answer...
  • Do Instructions For Rhino-Rack Kayak Load Assist Include Yakima JetStream Bars
    Hey Jeffrey, The instructions for the Rhino-Rack Universal Load Assist # RR-RUSL do not include mounting to the Yakima JetStream crossbars. I checked with Rhino-Rack and they do not have those crossbars as compatible with this load assist so I can't recommend using it. That said, we do have a very similar option for you that will work with the JetStream crossbars: - Inno Kayak Lifter Load Assist # INA453 Like the Rhino-Rack, the Inno # INA453 is a side-loading kayak assist, though there...
    view full answer...
  • Recommendation For Protecting A Kayak When Using The Inno Load Lifter INA453
    By cowling, I assume you are referring to the coaming, which is the edge of the cockpit on your kayak. If this is the case, you will want the Inno Pads for Crossbars - 20" Wide # INA771. Typically these are used on a crossbar, and you may need two sets if your Yakima JetStream bars are currently bare, but they can also be used on the Inno Kayak Lifter Load Assist # INA453 to protect your kayak when loading and unloading.
    view full answer...
  • Kayak Load Assist that Fits 2014 Acura RDX Roof Rack
    The Rhino-Rack Universal Load Assist # RR-RUSL fits the following crossbars: Rhino-Rack Vortex Aero, Euro, and Heavy-Duty crossbars; Whispbar Flush, Through, Rail, and HD crossbars; and Thule AeroBlade and square crossbars If you have one of those listed bars it would fit and work great for you. Another option that might work is the Inno Load Assist part # INA453 which fits OEM crossbars like you might have. This would fit all crossbar styles so either way this would be a solution that...
    view full answer...
  • Best Kayak Load Assist For Thule WingBar Evo Crossbars
    Hello! Thanks for the question and a kayak load assist is definitely a good idea, with a side loader being the best option. A roller from the rear is helpful, but you still have to do the heavy lifting, so the side assist is going to give you the most help. And the best side-load assist that will work with your Thule WingBar Evo crossbars is one from Inno: - Inno Kayak Lifter Load Assist # INA453 The # INA453 just clamps onto the outer edge of the crossbars, and has an arm that swings...
    view full answer...
  • Will the Rhino-Rack Universal Load Assist Fit the Factory Roof Rack of a 2018 Mazda CX-5
    I do have another option for you, but the Rhino-Rack Universal Load Assist # RR-RUSL will most likely not work for your factory roof rack on your 2018 Mazda CX-5. Factory roof racks are not listed as a fit and that is because most factory roof racks do not have any over hang, which is needed for this load assist. Instead, I recommend the Inno Kayak Lifter Load Assist # INA453 which is a fit for most factory crossbars. You would just want to be sure that your crossbars are no larger than...
    view full answer...
  • Recommended Kayak Lift Assist For Roof Racks To Allow One Person Lifting And Loading
    My recommendation for getting your 14.9 Scupper Pro onto your roof rack is to use the Malone Channel Loader Kayak Load Assist # MAL48FR. This will allow you to easily load your kayak from the ground onto your vehicle roof by yourself. It uses a roller similar to a boat trailer to roll the kayak up onto your crossbars. A side loading option to give you a pivot point is the Inno Kayak Lifter Load Assist # INA453 if you prefer a smaller load assist.
    view full answer...
    Image 1 for
  • Will Inno Kayak Lifter Load Assist INA453 Fit Factory Roof Rack Crossbars on a 2013 Toyota RAV4
    The Inno Kayak Lifter Load Assist - Clamp On - Side Loading - 90 lbs Item # INA453 will fit factory crossbars up to 3-1/2 inches wide by 1-1/8 inches tall. Measure the bars on your 2013 Toyota RAV4 to determine if they meet those specs. The swing-out arm is 18 inches long and the base bar is 43 inches long. With roof rack bars that do not extend out past the side rails that 18 inch swing arm length may or may not be long enough for you. A similar option is the Rhino-Rack Universal Load...
    view full answer...
  • How to Carry 4 Kayaks Weighing a Total of 139 lbs on Roof of 2017 Chrysler Pacifica Limited
    Since the total weight of your kayaks is 139.2 lbs and your 2017 Chrysler Pacifica Limited is rated for 150 lbs then you can definitely transport all 4 on your roof! For your application I do recommend using the Rhino-Rack Nautic # RRS520 over the Thule Stacker # TH830 because it isn't as wide which will help with your crossbar space. You can use the Rhino-Rack Anchor Straps # RRRBAS-2 for attachment points at your hood and hatch and then the Rhino-Rack Cam-Buckle Cinch Strap and Anchor...
    view full answer...
  • Can Yakima BigStack be Used for 40 lbs, 10-1/2 Long Kayak on 2011 Subaru Outback Wagon
    The Yakima BigStack # Y04041 can definitely handle a 40 lb, 10-1/2' kayak on your 2011 Subaru Outback Wagon, and it can be loaded by one person provided that person can lift and maneuver the 40 lbs. If the 40 lb kayak is a little much for you to handle on your own you may want to look into a load assist carrier like the HandRoll # Y04082-2, ShowDown # Y04081, or a supplemental load assist like the Inno # INA453 or Rhino-Rack # RR-RUSL.
    view full answer...
  • Important Roof Rack Dimensions for Installing Inno Clamp On Kayak Lifter Load Assist INA453
    The mounting brackets on the Inno Clamp On Kayak Lifter Load Assist # INA453 fit on many crossbar shapes and sizes up to a maximum size of 3-1/2 x 1-1/8-inches; please see the linked photo. The roof rack crossbars also need to be spaced apart between 27 and 39 inches to ensure a stable foundation for your kayak. In terms of how much exposed crossbar you need for the carrier's mounting hardware, I measured the Inno mounting bracket and found it is 1-1/8-inches wide, so you would really...
    view full answer...
    Image 1 for
  • 2021 Subaru Outback Factory Rack What Are My Kayak Load Assist Options
    According to Inno, the Inno Kayak Lifter Load Assist - Clamp On - Side, part # INA453, is supposed to be mounted outside of the towers on your vehicle. Unfortunately the bars on your roof rack terminate at the rails on your vehicle so you will not be able to use this with your factory bars. However, I may have a solution, I recommend the Rhino-Rack Universal Load Assist - Crossbar Mount - Side Loading, part # RR-RUSL. It comes with six different adapters to fit different size racks and...
    view full answer...
  • Does The Inno Kayak Lifter Load Assist Work With J-Style Kayak Carriers?
    The Inno Kayak Lifter Load Assist - Clamp On - Side Loading - 90 lbs # INA453 will work just fine on crossbars that already have a J-style kayak carrier installed. Since the Inno Load Assist mounts on the side of the crossbars, it will not interfere with the kayak carrier. You will just want to make sure your crossbars have a spread of 27-39"; crossbar spread is the distance between each crossbar, measuring from the center of each bar. You will also want to make sure your crossbars are...
    view full answer...
  • Roof Rack and Kayak Carrier Recommendations for 2 Hobie Kayaks on a 2020 Kia Telluride
    For your 2020 Kia Telluride I recommend going with the Yakima JetStream Crossbars # Y00425 with RidgeLine Towers # Y00145 and RidgeClip Fit Kit # Y94FR. This rack will attach directly to your Telluride's side rails. When it comes to a kayak carrier I really like the Kuat Class 2 # C2R1B which has a weight capacity of 80 lbs and can handle a max hull width of 36". It comes with tie-downs to secure your kayaks but you also might be interested in the Rhino-Rack Anchor Straps # RRRBAS-2 so...
    view full answer...
  • Recommended Roof Rack Load Assist For Truck With Camper Roof Rack That Is 7-1/2' From The Ground
    With the height of your truck camper at 7-1/2' tall I recommend using a Inno Kayak Lifter Load Assist # INA453. This will clamp onto your crossbars up to 3-1/2" wide and 1-1/8" tall and fits a crossbar spread of 27-39". Since it is clamped onto your crossbars you will not have to concern yourself with the limited height of the Rhino-Rack Universal Load Assist # RR-RUSL only extending to 7'3-1/8" tall. Or having to try to position the bar on the crossbars every time you load and unload your...
    view full answer...
  • Load Assist to Help Load a Kayak on the Roof of a Toyota Prius with Thule AeroBlade Roof Rack
    The Malone Telos kayak loading system # MPG351XL attaches in a specific way that is only compatible with the Malone J-style kayak carriers but I do have an option for you. You can use the Rhino-Rack universal load assist # RR-RUSL. It is compatible with the Thule AeroBlade bars you have on your Prius. Basically you will rest one end of the kayak on the load assist so you only have to lift one side which will be about half the weight. I have linked a video showing how it works. For a similar...
    view full answer...
    Image 1 for
  • Will Thule Hullavator Work if Truck Cap is 10 Inches Beyond Crossbar
    Hey Ed, The Hullavator # TH898 will not work with the cap 10 inches beyond the end of the crossbar; the crossbar would need to extend a minimum of 4 inches beyond the cap for this to work. You'd have to use a standard kayak carrier and a different load assist that just attaches to the bars, like the Yakima JayLow Kayak Carrier # Y04073 and Inno Kayak Lifter Load Assist # INA453. I know this isn't exactly the same as the Hullavator in terms of loading ease, but it will definitely help...
    view full answer...
  • Can the Inno Kayak Lifter Load Assist Be Used On the Passenger Side
    I spoke with Inno about the Inno Kayak Lifter Load Assist part # INA453 and was informed that the arm can be swung 180 degrees therefore can be installed on either the driver or passenger side.
    view full answer...
  • Compatibility of Load Assist with 2002 Subaru Forester OEM Crossbars
    The Rhino-Rack Universal Load Assist # RR-RUSL has a couple mounting hole options to ensure a fit on most crossbars. There hasn't been a confirmed fit on your 2002 Subaru Forester factory crossbars, so I recommend you use the Inno Kayak Lifter Load Assist # INA453 instead which has been designed to fit with your factory bars.
    view full answer...
  • Recommended Side Load Assist Bar For Yakima Jaylow J Racks
    When it comes to installing a side load assist bar to work with your Yakima Jaylow J Rack Bars The Rhino-Rack Universal Load Assist - Crossbar Mount - Side Loading - 132 pounds # RR-RUSL will only work with Rhino-Rack Vortex Aero, Euro, and Heavy-Duty crossbars; Whispbar Flush, Through, Rail, and HD crossbars; and Thule AeroBlade and square crossbars. So they will not work with your Yakima bars. The Inno Kayak Lifter Load Assist - Clamp On - Side Loading - 90 pounds # INA453 has an easy,...
    view full answer...
  • Compatibility of the Inno Kayak Lifter on a 2014 Toyota RAV4
    The required crossbar spread to install the Inno Kayak Lifter, # INA453, is 27-39 inches measured from center to center of the crossbars. If your factory crossbars can be adjusted to this measurement, then the Inno Kayak Lift will mount to the top of your RAV4. The Inno Kayak Lifter will mount to square, round, and most factory bars and support a maximum 90 lbs. Inno recommends the maximum crossbar dimensions to be 3-1/2 inches long and 1-1/8 inches tall to mount the kayak lifter to your...
    view full answer...


< Previous



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Tyler C
Written by:
Tyler C
Employee Dustin K
Video Edited:
Dustin K
Employee Lisa S
Updated by:
Lisa S
Employee Ronnie R
Updated by:
Ronnie R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.