Kodiak Disc Brake Caliper - Stainless Steel - 3,500 lbs to 6,000 lbs

See what our Experts say about this Kodiak Accessories and Parts

• Recommended Replacement Caliper For A Kodiak 225
  We do sell the caliper but it will come with pads included. I have three options for you listed below depending on your trailer's application: Kodiak Disc Brake Caliper - Dacromet - 3,500lbs to 6,000lbs # KDBC225DAC. - Dacromet plating provides excellent corrosion resistance for freshwater or saltwater use with a 300- to 400-Hour salt-spray rating. Kodiak Disc Brake Caliper - KodaGuard - 3,500lbs to 6,000lbs # KDBC225KG. - KodaGuard plating provides excellent corrosion resistance for...
  view full answer...
• Does The Kodiak Disc Brake Assembly # K1HR35DS Include Brake Pads?
  Yes, the Stainless Steel Caliper # KDBC225S that comes in the Kodiak Disc Brake Assembly # K1HR35DS does have Brake Pads # K225CPSS loaded in the caliper.
  view full answer...
• Availability of 7 foot Brake Line Hose and Kodiak 12
  We do have replacement Kodiak Disc Brake Calipers for the 12" Rotors rated for 5,200-lb - 6,000-lb axles from Kodiak available for you. Part # KDBC225DAC has a Dacromet finish and part # KDBC225S has a Stainless Steel finish - you will simply need to choose the one that corresponds to what you already have on your trailer. For a replacement 7' Hose you can use part # BH-3MFS-7 from Kodiak which has the 3/16" Male Fittings w/ Stainless Flares already installed for you.
  view full answer...
• Does the Replacement Mounting Bracket for Kodiak Disc Brake Caliper Work w/ the 225 SS Calipers
  I contacted the manufacturer to confirm that the Replacement Mounting Bracket for Kodiak Disc Brake Caliper # KCMB10RS will work with your Kodiak Disc Brake Caliper # KDBC225S (225 SS). They were able to confirm that those two parts will work together.
  view full answer...
  
• Replacement Parts Available for Kodiak Disc Brake Kit K2R35D
  Yes, replacement parts are available for Kodiak disc brake kit # K2R35D. For calipers you can use # KDBC225DAC for dacromet or # KDBC225S for stainless steel. Both come in quantities of 1 and are for 3,500 to 6,000 pound axle Kodiak disc brake kits. For brake pads you can use # K225CP for Kodiak disc brake kits for 3,500 to 6,000 pound axles. There is also a rebuild kit, # KDBC225KIT. For a rotor (this kit has rotors that fit over idler hubs) you can use # KR10D for dacromet or # KR10S...
  view full answer...
• Replacement Disc Brake Calipers For Boat Trailer With Surge Brakes
  The caliper itself will typically have information stamped on the casing for the cylinder(see image). Here are some examples of what is stamped on the calipers we carry along with finish on that caliper. Kodiak 225 # KDBC225DAC (Dacroment) Kodiak 225 SS # KDBC225S (Stainless) Kodiak 225 # KDBC225KG (KodaGuard) Kodiak 250 # KDBC250E (E-Coat) Kodiak 250 # KDBC250D (Dacroment) Kodiak 250 SS # KDBC250S (Stainless) Dexter 225 # K71-624-00 (E-Coat) Dexter 89-5 # K71-693-00 (E-Coat)
  view full answer...
  
• Replacement Caliper for Kodiak Disc Brakes With 10 Inch Rotor
  It sounds like you are looking for a replacement caliper for your Kodiak Disc brakes with a 10" rotor like the Kodiak Disc Brake Kit # K2R35S. Depending on the finish you need we have a few different options available for replacement calipers. For dacromet you need the # KDBC225DAC. For KodaGuard you need the # KDBC225KG. The last option is for stainless steel which would be the # KDBC225S. All of these are designed to fit 10" rotors with axle ratings from 3,500-6,000 lbs. I have attached...
  view full answer...
• Kodiak Disc Brake Caliper Replacement Parts
  The Kodiak 225 calipers # KDBC225S fit 3,500 lb 10 inch assemblies as well as 12 inch rotors up to 5,200 lbs. The 204 calipers fit 3,500 lb axles with 10 inch assemblies. The 225 calipers are more prominent than the 204 calipers but they are not directly interchangeable. I reached out to my contact at Dexter (who bought out Kodiak) and he said the mounting locations are slightly different and the piston size is different with the 204 model being roughly a 2 inch diameter piston and the...
  view full answer...
• Recommended Replacement Stainless Steel Caliper for Kodiak 225 Series with 12 Inch Rotors
  I spoke with my contact at Kodiak and was able to confirm that the Disc Brake Caliper - Stainless Steel # KDBC225S will work perfectly with your existing Kodiak 225 Series with 12 inch rotors. He also stated that you can use your existing bolts without modification but he does recommend using the two new bolts that will come included with the caliper. They should be torqued down to 45 ft-lbs. The stainless steel caliper does include the ceramic brake pads along with an oversize, stainless...
  view full answer...
• Which Rotors Do I Need For My Kodiak 225 SS Calipers
  We do have a few options for your Kodiak 225 calipers # KDBC225S, we offer the Kodiak 10" Rotor # KR10D which have a 5 on 4 1/2 bolt pattern, will fit 14" or larger wheels, and will work on 3,500 pound axles. Finally we also offer the Kodiak 12" Rotor # KR12D which have a 6 on 5 1/2 bolt pattern, will fit on wheels 15" or larger, and will work on 5,200 to 6,000 pound axles.
  view full answer...
• Kodiak Disc Brake 225 Caliper Rebuild Kit
  While there is not a manual or video available for the Kodiak Disc Brake Caliper Rebuild Kit # KDBC225KIT I did find an expanded drawing of the parts of Kodiak Disc Brake Caliper # KDBC225S which should help so you can see how the pieces fit. The rebuild kit will require you have a 5/16" Allen wrench or 1/2" hex tool and comes with the following parts, which are numbered on the diagram so you can see exactly where they go on the caliper. - Replacement Stainless Steel Piston # K225PS...
  view full answer...
  
• Recommended Kodiak Disc Brake Caliper Re-Build Kit
  We offer two caliper re-build kits for Kodiak disc brake systems. You will select yours based on axle rating. You can see both on the linked page, kit # KDBC225KIT that you referenced which is for brakes on 3500- to 6000-lb axles, such as # KDBC225S, and the other part # KDBC250KIT which is for brakes on axles rated at 7K- or 8K-lbs, such as # KDBC250S.
  view full answer...
• Replacement Surge Brake Actuator, Brake Lines & Calipers For 2005 Mastercraft Pro V 205 Boat Trailer
  I recommend the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout # DX93FR for your 2005 Mastercraft Pro V 205 boat trailer. This weld-on disc brake actuator is for a 3" wide by 5" tall frame, and includes a electric reverse lockout. It latches to a 2" hitch ball and comes primed so you will be able to weld it onto your frame and paint to match the trailers frame. I do see that your boat can be fitted to a single axle trailer or tandem axle depending on your setup will decide what...
  view full answer...
• Will a Kodiak 250 Disc Brake Caliper Fit in Place of a Kodiak 225 Caliper
  You should not have any problem fitting the Kodiak Disc Brake Caliper, # KDBC250S, in place of the # KDBC225S. The major difference is the piston size (1/4 larger on the 250). The 225 is designed for 3,500 to 6,000 pound axles whereas the 250 is designed for 7,000 to 8,000 pound axles. If the actuator you are using is not rated high enough then it could have problem pushing the piston to apply the brakes.
  view full answer...
• Can Dot 5 Brake Fluid Be Used with Rebuilt Kodiak 225 Brake Calipers?
  The Kodiak Disc Brake Caliper 3,500 lbs to 6,000 lbs # KDBC225S and similar finishes will require the Kodiak Disc Brake Caliper Rebuild Kit for 3,500 lb to 6,000 lb Trailer Brakes # KDBC225KIT which will give you all the seals, bolts, bushings, and piston needed. Once rebuilt the system can use Dot 5 brake fluid but only after removing all previous fluid and flushing the system. Dot 5 is not compatible with Dot 3 or 4 so a complete flush or new parts are required. I also recommend...
  view full answer...
• Recommended Spare Parts To Replace UFP Hubs With Rotors And Calipers
  We don't have the UFP Brand, but I can give you some compatible parts. For your trailer hubs with rotor, I recommend the Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs # KHR10D. You will need grease seal # RG06-050 along with bearing # L68149 and # L44649. For your brakes, I recommend the Kodiak Ceramic Brake Pads w/Stainless Steel Backing Plate - 3,500 lbs to 6,000 lbs # K225CPSS along with the Kodiak Disc Brake Caliper - Stainless Steel - 3,500 lbs to 6,000 lbs...
  view full answer...
• What Size Fittings Does Kodiak 225 Caliper Take
  Sounds like you are trying to install the wrong brake line to the Kodiak Disc Brake Caliper # KDBC225S that you mentioned. The fitting size needs to be 3/16 inch like what comes with the # 18TA-BLKIT. Since I don't know what brake lines you have now it's hard for me to verify that you have the right thing.
  view full answer...
• Can Kodiak Stainless Steel Disc Brake Calipers be Used to Replace Calipers on EZ Loader Boat Trailer
  If you have existing Kodiak calipers on your EZ Loader Trailer, then a stainless steel option like the Kodiak # KDBC225S for 3,500 to 6,000 pound axles will work great as a replacement. The stainless steel construction on this unit is ideal for extended marine use and features a 1,000-hour salt-spray rating. I have attached a short video demonstration on this product that you can also check out.
  view full answer...
• Replacement Parts for 2006 Marine Master Tandem Trailer
  I did some research on your 2006 Marine Master Tandem Axle Trailer and found some of the UFP part lists. Dexter owns that company as well as the Kodiak line, so the parts are extremely similar with different part numbers that should work very well as replacements. I recommend the Kodiak Ceramic Brake Pads - 3,500 lbs to 6,000 lbs # K225CP along with the Kodiak Disc Brake Caliper - Stainless Steel - 3,500 lbs to 6,000 lbs # KDBC225S. Then for your bearings and seals, I recommend the...
  view full answer...
• Parts Needed to Upgrade the Dacromet Calipers of # K2HR526D to Stainless Steel Calipers
  All you would need to replace the dacromet calipers of the Disc Brake kit part # K2HR526D that you have on your trailer would be the Kodiak Disc Brake Caliper # KDBC225S that you referenced. This is an identical caliper as what you currently have except it is made of stainless steel.
  view full answer...
• Recommended Suspension And Brake Upgrade For 2019 Forest River Sabre 32DPT W/ Tandem 5200lb axles
  I have another suggestion, but I don't think changing the axles wheels will have the added benefit you are looking for. Moving from 5200lb axles to 7000lb or 8000lb and heavier duty leaf springs will actually cause a rougher ride due to springs being stiffer than needed for the weight of your 2019 Forest River Sabre 32dpt. There is also not a kit to complete this change, and it will be pretty involved and costly. Going overkill on suspension usually leads to more negatives than positives,...
  view full answer...
  
• Replacement Caliper for Kodiak Disc Brake Kit # K2R35S
  Yes we have replacement stainless steel calipers for the Kodiak disc brake kit part # K2R35S with the part # KDBC225S.
  view full answer...
• Are Kodiak 225 Brake Pads Interchangeable With the Kodiak 204 Brake Calipers?
  According to Kodiak the 225 and 204 calipers and pads are not interchangeable. As they have discontinued the 204 calipers you will want to upgrade to the 225 Caliper # KDBC225DAC. This particular caliper is Dacromet coated for corrosion resistance. We also have a Stainless # KDBC225S if you will be using around salt water. These will use either the Kodiak Ceramic Brake Pads # K225CP and we also have them in Stainless # K225CPSS for better corrosion resistance as well to match with the...
  view full answer...
• Rebuild Kit for Kodiak Stainless Steel Calipers Model 225 on a Boat Trailer
  The rebuild kit you need for your Kodiak stainless steel calipers is part # DBC-225-KIT. It will come with everything you need except the casting.
  view full answer...

Do you have a question about this Accessories and Part?