Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This flexible, rubber brake line acts as part of a trailer's hydraulic braking system. Stainless steel flares, brass fittings, and a high thread engagement help prevent splits, corrosion, and leaks. Includes 2 standard male flare nut fittings.
Features:
Specs:
Flexible Rubber Brake Hose
This Kodiak brake hose is made of rubber, making it a practical choice for a variety of applications. Because you can easily bend it, a rubber hose is simpler to work with than a rigid stainless steel brake line. This flexibility makes a rubber hose great for use with foldaway trailer tongues because it is less likely to kink or break when bent. In addition, rubber hoses allow for a wide range of motion so articulating parts can effectively function. These qualities make rubber hoses better suited than steel lines for trailers with torsion axle suspension systems and trailers that have disc brakes.
Stainless steel brake lines have braided exteriors, which can not only wear against exterior surfaces, but also against the interior lining of the hose if dirt gets underneath the steel braid. And if the braid on a stainless steel line tears, it can cut into the hose lining. The exterior surface of this hose is solid rubber, so there are no crevices for debris to enter.
Durable Fittings with Deep Threads
Kodiak brake hoses have corrosion-resistant brass fittings with stainless steel flares. These fittings have a gap built into them that allows room for a line wrench - also called a flare nut wrench - to slide over the line and down to the nut. This type of wrench grips the nut better than a standard open-ended wrench so there is less chance of stripping the threads as you tighten down the nut.
The stainless steel that is used to create the flares on this hose is stronger than brass. As a result, these fittings are more durable than ones made entirely of brass. The stainless flares are primarily designed to keep the fittings from splitting when you tighten them down, but they offer absolute rust protection as well.
Kodiak's fittings have deeper threads than many other fittings on the market to provide a higher thread engagement. Deeper threads offer an advantage when used with fittings that have the same thread depth. These Kodiak fittings will work with most fittings on the market, but when they're used with other Kodiak fittings, the result is a stronger connection with fewer leaks.
Average Customer Rating: 4.8 out of 5 stars (73 Customer Reviews)
This flexible, rubber brake line acts as part of a trailer's hydraulic braking system. Stainless steel flares, brass fittings, and a high thread engagement help prevent splits, corrosion, and leaks. Includes 2 standard male flare nut fittings.My brake line broke on my boat trailer so I needed a 20' replacement. This brake line was offered at a reasonable price by a quality supplier. Upon receiving my new brake line I was very happy with the quality and the fact that the ends are stainless rather than copper/brass as the part that failed on my old brake line was the copper ends as I tried to break them free.
I expect this brake line will last as long as the boat trailer will.
I needed a 21' line but made this one work. Easy to work with and no issues. Installed on bass boat trailer.
John
6/17/2024
Brake line still operational and holding up well. No issues.
Was very excited when we got our product . We installed them and realized the main one the 20 foot hose had a cut in it before we pressurize the system. We were very disappointed it should’ve been caught before it was ever shipped. On a sidenote, they did ship it back out but now I’m behind on getting the job finished because of this. It should’ve been done last week and now I had to wait an extra week and now I’m too busy to finish the install. Maybe next time you all should check your Product before you ship it out.
Hello Carol,I was not vary happy with my order as you can see the parts were not packaged vary well and we’re beat to hell in shipping I know it’s out of your hands after shipped parts arrived rusty bearing races pitted rotors had nicks in them. I was in a bind to get the boat back in water before the season started so I had to suck it up clean up the damage the best I could and get to fishing.
Jenny N.
10/20/2022
I appreciate the feedback and will share it with our shipping department. Customer service will reach out to you.
Continue part of brakes overhaul and line replacement. Very easy install, almost like plug and play, again adding some metal sheathed to shield against rodent possible gnawing. product seems to be well made, much better than my old metal lines.
Ordered a 20" brake line for my trailer and received it quickly and at a very good price. Haven't been able to finish the installation however the ends did fit the master cylinder perfectly, just need some dry weather to get under the trailer and connect the hose to the distribution fitting then bleed the system and away we go.
Replaced steel brake line on boat trailer from master cylinder to axle. Worked perfect.
The website was thorough and well documented. Product selection was easy and the item arrived as indicated. All installed as expected.
Great price, fast delivery, I would definitely use etrailer again and recommend them to others. Replaced a broken brake line on surge brakes on boat trailer. We are enjoying the boat at the lake again.
Item was exactly as expected and with fast shipping. Thank you
Fantastic customer service and the parts arrived 2 days early.
Hose worked perfect, buy extra fittings. No matter how you plan putting it together we always wish you had one more elbow or T fitting. Hard to find them In a local store.
I like the fact that when ever possible , the products sold are made in the USA. They are reasonably priced and so far, always available. It is vary easy to shop and find all the parts and pieces that I need for my projects at etrailer.com. Even when I may have questions about my project, etrailer.com is just a phone call away with professional help available "immediately". In the future, I will always use etrailer.com for all my trailer needs. This is a top notch company that a person can count on.
Worked great to replace a brake line I stripped when replacing the brake actuator on the surge brake system on my trailer.
Package arrived late Fri night or Sat morning which isn’t bad but I don’t know what your processing time is. I never got a confirmation that it had shipped. Everything came in good shape and was installed on trailer. I would use your company again. Thank you for responding to me.
I have not installed yet but all parts appear to be of very high quality. Jesse was very knowledgeable and very helpful. Shipping was amazing, it seemed as soon as I placed the order I looked out and ups was bringing the box up to the door.
this is the best company to find what you need for trailer parts and brake parts. the price is great and the shipping is fast. Dan-- Kona, Hawaii
Replaced the steel line on my boat trailer with the rubber hydraulic line. It Worked like a charm. I dreaded having to make up a 20 feet steel line and route it inside the trailer box tubing.
The brake line worked great on my boat trailer. First class stuff....
great replacement product for my Tie Down main line on boat trailer.. Fit and ease of install was spot on.
Excellent customer service, fast deliver, items worked as described. This is why we shop only here for all towing and trailer needs. Thanks
I paid a little extra for priority mail and it was delivered fairly quick.
The beak hose is as advertised I installed it within minutes after delivery and it is a perfect fit! I'm happy with this trusted seller and will definitely buy from them again.
Art.
All parts were exact fit. I over ordered one of the hoses and I returned it and got a prompt refund.
Rebuilding a boat trailer, nice upgrade compared to OEM.
This is the place to shop for trailer p roducts.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Curtis
6/8/2024
After a year in service Im still pleased with this product. It was a great deal and I still feel that way today.