Replacement Electric Stabilizer Jack Support Arm for Lippert Components RV Jack - Black
(30 reviews)
Price: $31.19
In Stock
Replacement Electric Stabilizer Jack Support Arm for Lippert Components RV Jack - Black
Item # LC1134121
Retail:$55.59
Our Price: $31.19
You Save: 44%
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (30)
- Q & A (0)
- Videos (1)
- Photos
Lippert Accessories and Parts - LC1134121
- Camper Jacks
- Trailer Jack
- Stabilizers
- Lippert
Replaces the support arm for your Lippert Components Power Stabilizer jack.
Features:
- Replaces the support arm for your Lippert Components Power Stabilizer jack
- Heavy-gauge steel construction
- Black powder coat finish
Specs:
- Dimensions:
- Overall length: 19-5/16"
- Mounting hole to mounting hole (center to center): 17-13/16"
- Quantity: 1 support arm
1134121 Replacement Power Stabilizer RV Jack Support Arm for Lippert Components RV Jack - Black
Video of Replacement Electric Stabilizer Jack Support Arm for Lippert Components RV Jack - Black
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Lippert Replacement Electric Stabilizer Jack Support Arm - LC1134121
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this Lippert replacement electric stabilizer jack support arm. This is going to replace the support arm for your Lippert components power stabilizer jack. And because this is coming from Lippert, you can trust it is going to work with your power stabilizer jack, no worries about fit issues or compatibility. It is a nice heavy-duty steel construction so it is gonna be very durable for you. It does have a black powder coat finish to help resist rust and corrosion.
Just to give you a little extra reassurance that this is gonna work for you, you can see that this does have an overall length of about 19 and 5/16 of an inch. Our mounting holes from center to center, we're looking at approximately 17 and 5/8 of an inch. So if you are needing to replace that support arm, whether it's been bent or whatever the case may be, this is gonna be exactly what you need. That completes our look for today. Again, I'm Michael with etrailer.com.
Thanks for watching.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
Customer Reviews
Replacement Electric Stabilizer Jack Support Arm for Lippert Components RV Jack - Black - LC1134121
Average Customer Rating: 4.9 out of 5 stars (30 Customer Reviews)
Replaces the support arm for your Lippert Components Power Stabilizer jack.by: John 04/15/2023
The arms fit well into the stabilizer configuration once I reamed out the holes for the original bolt size to go through in a couple of the arms.
by: Eric Croteau08/26/2016
I received this product in a timely manner. Order was processed abd shipped very quickly. See photos for replacement images. I will definitely order from etrailer.com again.
by: Greg S07/24/2016
Fit correctly. System seems to run with less effort with the new arms.
Replaced the bent arms on my Lippert Stabilizers that got bent when the lost the battle with the hydraulic leveling system after I forgot to lift the stabilizers first.
I did replace all the nuts/bolts/washers when installing the new arms as some of the old ones had to be cut off because they were bent.
by: Wayne R.06/04/2016
I received my order of Lippert Components Electric Stabilizer RV Jack Support Arm sooner than expected. Easy to install and did the job i expected.
by: John 05/20/2021
This bar was a perfect match for a Lippert 113407 rear stabilizer jack. Ordering was easy and shipping was faster than I expected. Bars were installed with new hardware procured locally. etrailer has always come through for me over my course of many different orders.
by: R. Scott07/06/2016
Great communication from the time my order was placed. The Black Stabilizer Arms for my electric RV jacks swapped out perfectly! Thanks for providing a replacement at such a great price.
by: Beverly 09/19/2019
Second order from etrailer.com. Item arrived quickly and as described. Tracking great!
by: Zack05/30/2016
Worked well. Fit right without any adjustments. Good replacement support arm for lippert electric support system
by: txaggie199409/27/2018
These replacement stabilizer jack arms were a perfect fit for LCI Model: 113407.
by: Ricky07/25/2019
PART FIT PERFECT AND SHIPPING WAS VERY FAST ....I WOULD ORDER AGAIN FROM ETRAILER VERY EASY TO FINE WHAT YOU ARE LOOKING FOR........THANKS
by: Scott 07/18/2020
Products ordered, came quickly, fit perfectly. No problem at all. Continued good service from etrailer. Thanks.
by: Steve J01/25/2017
These are stronger than the stock parts on my Toy Hauler! No problems since install.
by: Chris K08/01/2015
Great business, my item was back ordered from the manufacturer and etrailer keep me informed the whole time.
by: Tim 01/20/2022
Product is better made than original thanks e trailer
by: Brian 09/10/2021
Arrived on time and was the right replacement part
by: Roger06/09/2020
Exact fit. Replacement for bent braces.
by: Jamie 02/24/2021
The braces were exact dimensions listed. Fast shipping and packaged nicely. Installed in 10 minutes.
by: Brent02/18/2016
Exact item I needed. VERY fast delivery and didn't even pay for speedy. Excellent service from this company and its not the first time.
by: Dale W06/23/2016
Perfect fit. Easy to install, seems stronger than OEM. Good Product.
Thanks
by: Jody04/01/2017
This item is actually better quality then the original brace. Quick delivery.
by: Chris 06/03/2021
Received product on time and as advertised. Fit perfect.
by: Elena04/18/2023
by: Brenda S09/14/2017
They are exactly what was needed.
by: larry06/30/2016
The price was right and service was fast thanks
by: William05/17/2018
Thanks
25
30
Show More Reviews
See what our Experts say about this Lippert Accessories and Parts
- Lippert Stabilizer Jack Support Arm ReplacementYour picture didn't make it through but based on what you described it sounds like you are in need of the Replacement Electric Stabilizer Jack Support Arm for Lippert Components RV Jack # LC1134121. These notoriously get bent like in situations that your dealer informed you about, but I would not say that they normally are bent from the factory so you might push harder with your dealer on that issue.
view full answer... - Replacement Support Arm Recommendation for Lippert Stabilizer Jack # 113407For your Lippert stabilizer jacks 113407 that you referenced we do have replacement support arms. For that you'd want the part # LC1134121.
view full answer...
- Will Stabilizer Jack Support Arm # LC1134121 Fit a 2011 Forest River SurveyorYou will want to compare the measurements of replacement Stabilizer Jack Support Arm # LC1134121 with one of the existing ones on your 2011 Forest River Surveyor to determine if it will work. The replacement measures 19-5/16" long overall and the mounting holes are spaced 17-13/16" apart on center. If you have different measurements let me know what they are and I can determine if there is one that will fit.
view full answer... - Replacement Support Arm for Lippert Stabilizer Jack 113407Yes! I checked with Lippert and replacement support arm # LC1134121 is a fit for your Lippert stabilizer jack model 113407.
view full answer... - Does Replacement Stabilizer Jack Leg LC1134121 Fit Lippert 113407 StabilizerThe replacement arm part # LC1134121 does fit your Lippert electric stabilizer with part number 113407 on it but we do not have the bolts you are looking for. Your best option might be to match up what you'd need at a local hardware store.
view full answer... - Replacement Electric Stabilizer Jack Support Arm LC1134121 InstallationYou should not need to adjust the motor on your electric stabilizer when installing the Replacement Electric Stabilizer Jack Support Arm # LC1134121 so long as the other parts of the jack were not damaged in any way. I do suggest carefully inspecting the entire stabilizer for any signs of other potential damage, just in case. The photo I linked for you shows the placement of the installed support arm on the stabilizer.
view full answer...
- Replacement Stabilizer Jack Arm for Keystone Sprinter CampfireIf you are referring to the support arm on a set of electric stabilizer jacks then we do offer these, the Replacement Electric Stabilizer Jack Support Arm for Lippert Components RV Jack. The part # LC1134121 for black or part # LC1134121 for yellow. If this was not what you were looking for please just let me know.
view full answer... - Replacement Support Arms for Lippert Electric Stabilizer Jack 113407The ends of the support arms on your stabilizer jack should have a slight bend (see photo) but the arm itself should not be bent. If it is then it will need to be replaced. The correct one for you is the Replacement Electric Stabilizer Jack Support Arm for Lippert Components RV Jack part # LC1134122 if you have yellow support arms or part # LC1134121 if you have black support arms.
view full answer...
- Replacement Lippert Stabilizer Support Arms For Lippert PSX1 and PSX2 Electric StabilizersI believe that you are missing a number on the end of your stabilizer jack. Lippert has a 337199 which will use either the Black Replacement Electric Stabilizer Jack Support Arm # LC1134121 or Yellow Replacement Electric Stabilizer Jack Support Arm # LC1134122. Both of these are the same 19-5/16" long, they are just different colors that were used with different systems.
view full answer... - Solution for Lippert Stabilizer Jack with Bent/Broken LegThe legs of the Lippert electric stabilizer jack you have are not replaceable. The only solution would be an all new stabilizer setup like the # LC369774 which is essentially the newer version of what you have now.
view full answer... - Replacement Stabilizer Jack Support Arm for a Lippert Electric Stabilizer JackFor your Lippert High-Speed Power Stabilizer Jack 337199 you're going to need the Replacement Electric Stabilizer Jack Support Arm for Lippert RV Jack # LC1134122. This arm measures 19-1/4" long, 1-1/2" wide, and has a distance of 17-13/16" between the mounting holes.
view full answer... - Correct Replacement Arm for Lippert Components PSX1 High-Speed Power Stabilizer JacksThere are two replacement arms for the Lippert Components High-Speed Power Stabilizer Jacks, the Replacement Electric Stabilizer Jack Support Arm part # LC1134122 for yellow and part # LC1134121 for black. If you currently have yellow arms then you will need to use the yellow replacement but if you currently have black arms you will need to use the black for replacement.
view full answer... - Replacement Support Arms For Electric Stabilizer On 2014 Heartland BighornThe best way to find the replacement support arms for your stabilizer jacks is to measure the overall length and the mounting hole dimension. The arm you came from, part # LC1134121 is designed for a Lippert power stabilizer jack and they measure 19-5/16 inches overall and 17-13/16 inches center of hole to center of hole. Another replacement arm we offer for a Lippert system is part # LC1134122. This measures 19-1/4- x 1-1/2-inches overall and has a hole spacing of 17-3/8-inches.
view full answer... - Replacement Support Arm for Lippert Components Stabilizer Jack Part # LC298707The correct replacement support arm for the Lippert Components High-Speed Power Stabilizer Jack part # LC298707 is the Replacement Electric Stabilizer Jack Support Arm part # LC1134122.
view full answer... - Replacement Lippert Stabilizer Jack 113407 Stabilizer Arm RecommendationI checked with Lippert and replacement support arm # LC1134121 is a fit for your Lippert stabilizer jack model 113407. If you wanted to replace the entire kit the part # LC298707 would work well as a replacement.
view full answer... - Replacement Support Brace Arms for Lippert Stabilizer Jack 113407We have the exact replacement support arms you need for your Lippert 113407 stabilizer, and you can even choose from black or yellow in color: - Black: Replacement Electric Stabilizer Jack Support Arm # LC1134121 - Yellow: Replacement Electric Stabilizer Jack Support Arm # LC1134122
view full answer... - Replacement Rear Stabilizer Recommendation for 2008 Wildcat Fifth WheelSounds like it's time to replace the stabilizers on your trailer. Since I am not sure what stabilizers you have on your trailer the best option is the Ultra Fab Stabilizer kit part # UF39-941705 which fits a very wide frame width range of 48" to 80" wide.
view full answer... - Replacement Parts for Lippert Electric Stabilizer JackThere are not replacement legs available for the Lippert Components High-Speed Power Stabilizer Jack - White Switch Kit - 30" Lift # LC369774 which is the same as the 198641 you mentioned. You will need to replace the entire unit. The support arm # LC1134122 in yellow or # LC1134121 in black is the only non-electric component able to be separately replaced. The motor # LC138445, circuit breaker # LC134181, and switches # LC144214 or # LC387874 as well as switch housing # LC134025 are...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Chelsea B
Updated by:
Wilson B
Updated by:
Mike S
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.