2 Inch Replacement Cap for Lippert Trailer Jacks
(11 reviews)
Price: $10.16
In Stock
2 Inch Replacement Cap for Lippert Trailer Jacks
Item # LC115863
Our Price: $10.16
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (11)
- Q & A (0)
- Videos (1)
- Photos
Lippert Accessories and Parts - LC115863
- Camper Jacks
- Trailer Jack
- Caps
- Lippert
Replaces 2 inch diameter cap for your Lippert Components trailer jack. Includes one replacement cap.
Features:
- Replaces 2 inch diameter cap on trailer jack
- Includes 1 cap
115863 2" Replacement Cap for Lippert Components Trailer Jacks
Compare to Bulldog BD015500
Video of 2 Inch Replacement Cap for Lippert Trailer Jacks
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Lippert 2 Inch Replacement Trailer Jack Cap - LC115863
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this lippert replacement jack cap. This is going to replace the two inch diameter cap for your jack. You can see our internal measurement here is just a little under two inches. So it is going to allow us to push this down in place and the uh ribbing here will allow it to stay firmly in place until we're ready to remove it. Then we can pry it out using a flathead screwdriver or something like that.
So this is going to help prevent any dirt debris from getting into the inside of your jack, where it could potentially cause issues with your components. And so having this on is going to help complete that look and protect that internal operation of your jack. That's gonna complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
2 Inch Replacement Cap for Lippert Trailer Jacks - LC115863
Average Customer Rating: 4.8 out of 5 stars (11 Customer Reviews)
Replaces 2 inch diameter cap for your Lippert Components trailer jack. Includes one replacement cap.by: Michael 01/30/2024
Fit perfect
by: Gary 08/04/2023
I wasn't sure what kind of jack I had, but the cap fit perfectly. I measured the diameter and the fit was perfect.
by: Richard E.05/11/2017
I bought the trailer used and there was no cap or information. I ended up ordering several different caps knowing one should be the correct cap. Reviewing this item is difficult for that reason. I can say one was correct and all seem to be off the same excellent quality so if anyone reads this review and you're not sure, rest assure you won't regret your purchase. Thanks eTrailer. Pleasure doing business with you.
by: David 08/10/2020
Haven't put it on the tongue jack yet.
by: Ray 08/08/2022
It’s a nice cap but it was too small. My fault. I need a 2-1/4 “.
by: Steve 07/21/2020
The cap was the exact fit. Thanks and i will be back with you when i need something else.
by: Warren 03/19/2021
fit perfect
by: Donald09/22/2022
by: Dave 06/26/2023
by: Kevin 05/10/2021
by: Michael01/27/2021
11
11
See what our Experts say about this Lippert Accessories and Parts
- Jack Cap Recommendation that Fits 2 inch Jack Top TubeIf you are looking for a replacement cap that fits a 2 inch inner diameter tube you would want the part # LC115863.
view full answer... - Rubber Plug Recommendation for Top of Powered Lippert A-Frame JackThe 2 inch cap you are looking for for the top of your Lippert powered trailer jack is the part # LC115863. The price and "add to cart" button are down below on this page.
view full answer... - Replacement Cap For Trailer Jack With 1-3/4" Inside Diameter TubeThe 2 Inch Replacement Cap # LC115863 is the cap you want for a round jack with 1-3/4" inside diameter jack tube.
view full answer... - Replacement Cap for 2 inch Trailer Jack TubeWe have the Lippert jack cap replacement with the part # LC115863 which fits 2 inch jack tubes like you have.
view full answer... - Replacement Top Plug and Manual Crank Handle for Lipper Power Tongue Jack 1817941The replacement top plug you are looking for that fits your Lippert Jack 1817941 is the 2 Inch Replacement Cap for Lippert Trailer Jacks # LC115863. Unfortunately we do not have a replacement for the manual crank handle.
view full answer... - Replacement Plastic Cap for Shelby Swivel JackIf you are looking for a replacement cap that fits a 2 inch outer diameter tube you would want # LC115863 or # PS500322. These fit an inner diameter of 1-3/4 inches and should fit your Shelby jack. You will want to measure to confirm fit, but this is the standard size.
view full answer...
- Replacement Cap for Trailer Jack with 2 inch Inside DiameterReplacement Top Cap for Dutton-Lainson Jacks Item # DL6602 fits jacks with an outer tube diameter of 2.5 inches and inner tube diameter of 2 inches. I went out and took some measurements for you (see photo). The ridges on the inside of the Replacement Cap # DL6602 have an outer diameter of 2.25 inches and an inner diameter of 1.90 inches.The flexible plastic ridges will ensure a tight fit and will work well inside your jack with an inner diameter of 2 inches.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Leah B
Expert Research:
Jameson C
Written by:
Rachael H
Updated by:
Wilson B
Updated by:
Mike S
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.